The determination of influence of applied lubricant on the physical-mechanical properties of bore surface layer
- 作者: Buylov EA1
-
隶属关系:
- MSTU MAMI
- 期: 卷 3, 编号 2 (2009)
- 页面: 130-136
- 栏目: Articles
- URL: https://journals.eco-vector.com/2074-0530/article/view/69626
- DOI: https://doi.org/10.17816/2074-0530-69626
- ID: 69626
如何引用文章
全文:
详细
The paper presents the research on influence of applied lubricant on the physical-mechanical properties of bore surface layer under the deforming broaching based on the following factors: surface hardness - (Нμ); surface hardening - δsurface; maximum hardness - HVmax; maximum depth of hardened layer- h; allocation microhardness. It is found that the application of metal-plate lubricants influences positively on all the indices.
参考
- Кузнецов А.М. Технологические основы создания методов обработки в машиностроении. Дисс на соискание ученой степени д.т.н. М., МАМИ, 1975г.
- Кузнецов В.А. Исследование качества поверхностного слоя при деформирующе-режущем протягивании. Дисс. на соискание ученой степени к.т.н. М., МАМИ, 1985г. 211с.
- Проскуряков Ю.Г. Объемное дорнование отверстий. М., Машиностроение, 1984г., 222с.
- Розенберг А.М. Физические явления при деформирующем протягивании и резание пластических металлов. Киев, Институт сверхтвердых материалов АН УССР, 1978г. 187с.