OPTIMIZATION OF THE COMPOSITION OF THE ELECTRICAL CONDUCTING LUBRICATING COMPOSITION FOR OPERATING APPLICATION IN THE BATTERY-BRUSH ASSEMBLY OF THE ELECTRIC MOTOR


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

A large number of methods for improving the efficiency of collector-brush units, a common feature of which is the creation of thin transition layers on the contact surface of materials that do not affect the current flow in contact and reduce the intensity of mechanical wear, have been studied. The data obtained in the course of the work showed that the electrically conductive lubricant composition helps to reduce the coefficient of friction to increase the wear resistance of the brush material and improve the switching conditions of the entire collector-brush unit. Considered the issue of optimization of the composition of the electrically conductive lubricating composition to the collector-brush Assembly of a traction motor. Providing with minimal costs the required composition of the conductive lubricant composition that meets the operating conditions is a difficult task and depends on a number of parameters of the components used. By using the generalized parameter of optimization of the desirability function of E. Harrington the optimal chemical composition of the conductive lubricant composition is obtained. Application of method E. Harrington to optimize the composition of the lubricant composition, allowed to meet the antagonistic requirements for its composition by mechanical and electrical characteristics, which had a positive impact on improving the performance and reliability of not only the collector-brush unit, but also the entire traction motor of the locomotive in operation.

Full Text

Restricted Access

About the authors

Vyacheslav Mikhailovich Korotkov

Rostov State University of railway transport

Email: korotkovvm@yandex.ru
candidate of technical sciences; Associate Professor Rostov-on-Don, Russian Federation

References

  1. Коротков В.М. Электропроводящая смазочная композиция для коллекторных электромашин большой мощности // Вестник РГУПС. 2014. № 3. С. 105-109.
  2. Коротков В.М. Исследование трения, изнашивания и электропроводимости в электрическом скользящем контакте коллекторно-щеточного узла // Трение и смазка машин и механизмов. 2008. № 11. С. 33-35.
  3. Коротков В.М. Влияние коллекторной пленки на процессы токопрохождения в электрическом скользящем контакте // Труды Всероссийской науч.-практ. конф. «Транспорт - 2011». Ч. 2. Рост. гос. ун-т путей сообщения. Ростов н/Д, 2011. 450 с.
  4. Коротков В.М. Систематизация факторов, влияющих на токопрохождение, в электрическом скользящем контакте тягового электродвигателя // Вестник РГУПС. 2016. № 2. С. 12-19.
  5. Коротков В.М. Исследование возможности применения смазочных композиций в электрическом скользящем контакте // Труды ростовского государственного университета путей сообщения. № 2 (13). Рост. гос. ун-т путей сообщения. Ростов н/Д, 2010. С. 38-43.
  6. Хольм Р. Электрические контакты. М.: Изд-во иностр. лит-ры, 1961. 464 с.
  7. Мышкин Н.К. Трибологические аспекты применения электрических контактов // Трение и износ. 1984. Т. 5, 31. С. 34-42.
  8. Коротков В.М. Применение смазочных композиций в коллекторно-щеточном узле для повышение надежности тягового электродвигателя локомотива // Тезисы докладов 73 Междунар. науч.-практ. конф. (Днепропетровск, 23-24 мая 2013 г.). Днепропетровск: ДИИТ, 2013. 360 с.
  9. Harrington E.C. The desirability function // Industr. Quality Control. Apr. 1965. Vol. 21. № 10. P. 494-498.
  10. Евдокимов Ю.А. Планирование и анализ экспериментов при решении задач трения и износа / Ю.А. Евдокимов, В.И. Колесников, А.И. Тетерин. Москва: Наука, 1980. 228 с.

Supplementary files

Supplementary Files
Action
1. JATS XML


This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies