Mathematical modeling of optimal parameters of atmospheric influence on the properties of the solar module


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Technological factors of environmental impact on the protective structures of solar modules are considered. It is shown that the problem of extending the service life of solar converters is successfully solved by improving the technology of their opera-tion - indirect activities. It is shown that after each regular cleaning of the surface of the protective structures of the solar module can almost completely restore the working efficiency of its power output, even at high (up to 35%) level of reduction due to dust on the territory of our country within one to two days. The atmospheric impact on the protective structures of solar modules was calculated. The influence of the partial pressure of air particles and the large difference between night and day temperatures on the degree of dust contamination of the protective coatings of the solar module is analyzed. They are the main natural factors that reduce the output power and efficiency of solar energy to electricity converters. Keywords: dust and air pollution, climate parame

Texto integral

Acesso é fechado

Sobre autores

Erkin Imamov

Tashkent University of information technologies named after Muhammad al-Khwarizmi

Email: erkinimamov@mail.ru
Dr. Sci. (Phys.-Math.), Professor Tashkent, Republic of Uzbekistan

Ramizulla Muminov

Physical-technical Institute, SPA “Physics-Sun”, Academy of Sciences of Uzbekistan

Email: detector@uzsci.net
Dr. Sci. (Phys.-Math.), Academician Tashkent, Republic of Uzbekistan

Rustam Rakhimov

Institute of materials science, SPA “Physics-sun”, Academy of Sciences of Uzbekistan

Email: rustam-shsul@yandex.com
Dr. Sci. (Eng.); Head of laboratory No.1 Tashkent, Republic of Uzbekistan

Bibliografia

  1. Sandnes B., Rekstad J. A photovoltaic/thermal (PV/T) collector with a polymer absorber plate: experimental study and analytic model. Solar Energy. 2002. No. 72 (1). Pр. 63-73.
  2. Tursunov M.N., Sabirov H., Yuldoshev I.A. et al. Photothermal batte-ries of different designs: comparative analysis. Heliotechnika. 2017. No. 1. Pp. 26-29.
  3. Tursunov M.N., Muminov R.A., Dyskin V.G., Yuldoshev I.A. A mobile photothermal convertor and its operating characteristics. Appl. Solar Energy. 2013. No. 1. Pp. 23-27.
  4. Tursunov M.N., Dyskin V.G., Yuldashev I.A. criterion of contamination of the glass surface of a photoelectric battery. Solar Technology. 2015. No. 2. Pp. 82-84.
  5. Akhatov J.S., Yuldashev I.A., Halimov A.S. Experimental Investigations on PV-T collector under natural condition of Tashkent. Energy Procedia. Mexico. ISES Solar World Congress. 2013. No. 39. Рр. 2327-2336.
  6. Muminov R.A., Tursunov M.N., Sabirov H. et al. Research of photo parameters of thermal batteries of increased efficiency in natural conditions. Problems of energy and resource saving. 2019. No. 2. Pp. 56-59.
  7. Muminov R.A., Tursunov M.N., Sabirov H. et al. Modernization photodope battery to improve the efficiency of use in hot climates. Physics. 2019. No. 1. Pp. 44-49.
  8. Mani M., Pillai R. Renewable and Sustainable Energy Reviews. 2010. Vol. 14. Pp. 3124-3131.
  9. Muminov R.A., Tursunov M.N., Sabirov H. et al. Research on methods for protecting the surface of photovoltaic batteries from contamination. Applied Solar Energy. 2015. Vol. 51. No. 2. Pp. 163-164.
  10. Zahidov A. Carbon nanotubes and transparent gels. J. Phys. Chem. B. 2012. No. 116. Pp. 10823-10829.
  11. Yuldoshev I.A., Saymbetov A.K. Combined photo thermo converters solar energy with reflecting concentrators. Proceedings of XII international Scientific Conference “Solid State Physics”. June 25-27, 2014. Pp. 217-219.
  12. Muminov R.A., Tursunov M.N., Sabirov H. et al. Research of photo parameters of thermal batteries of increased efficiency in natural conditions. Problems of energy and resource saving. 2019. No. 3-4.
  13. Tursunov M.N., Dyskin V.G., Sobirov H., Turdiev B.M. Improving the efficiency of the phototeplopreobrazovatelnoy installation. Heliotechnika. 2014. No. 4. Pp. 84-86.
  14. Gremenyuk V.F., Tivanov M.S., Zalessky V.B. Solar cells based on semiconductor materials. Alternative Energy and Ecology. 2009. No. 1 (69). Pp. 59-123.
  15. Tursunov M.N., Muminov R.A., Tukfatullin O.F. et al. Photothermoelectric batteries based on silicon solar cells. Heliotechnika, 2011. No. 1. Pp. 72-75.
  16. Chow T.T. A review of photovoltaic/thermal hybrid solar technology. Applied Energy. 2010. No. 87 (2). Pp. 365-379.
  17. Hallmark B., Hornung C.H., Broady D. et al. The application of plastic microcapillary films for fast transient micro-heat exchange. International Journal of Heat and Mass Transfer. 2008. Vol. 51. Pp. 5344-5358.
  18. Lutpullaev S.L., Tursunov M.N., Dadamuhamedov S., Yuldoshev I.A. Phototherapeutical. Utility model Patent no. FAP 00793 dated 18.07.2011. Rasmi Ahborotnoma. 28.02.2013. № 2.
  19. Mazumder M., Horenstein M.N., Stark J.W. et al. IEEE Transactions on Industry Applications. 2013. Vol. 49. No. 4. Pp. 1793-1800.
  20. Felts A. Amorphous and glassy inorganic solids. Moscow: Mir, 1986. 556 p.
  21. Wolkensteyn F.F. Physics-chemistry of the surface of semiconductors. “Science” Physical Ed. Math. Lit-ry. 1973. 399 p.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar


Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies