Testing of aluminum-silicon alloys mechanical properties on separately casted specimens
- Authors: Krushenko GG1
-
Affiliations:
- Issue: Vol 11, No 3 (2010)
- Pages: 158-160
- Section: Articles
- URL: https://journals.eco-vector.com/2712-8970/article/view/508645
- ID: 508645
Cite item
Full Text
Abstract
The mechanical properties of aluminum alloys before casting into moulds were determined on separately casted control specimens casted in horizontal or vertical forms. A comparison of the mechanical properties (tensile strength t, elongation 8, hardness HB) of 12-mm-diameter individually casted of AK7ch alloy control specimens and its density in the solid state (p) showed that it is necessary to use specimens casted in a horizontal mold for evaluation of castings quality.
It was estimated that position of separately casted test samples in the foundry metal form influences the indicators of mechanical properties of aluminium-silicon alloys.
It was estimated that position of separately casted test samples in the foundry metal form influences the indicators of mechanical properties of aluminium-silicon alloys.
References
- Influence of position in the mold of cast test specimens on the mechanical properties of aluminum specimens / Z. A. Vasilenko [et. al.]. URL: <http://www.springerlink.com/>content/k4879.
- КрушенкоГ. Г.,Василенко3. А. Плотностьимеханические свойства силуминов, термически обработанных в жидком состоянии//Расплавы. 1988. Т. 2. Вып. 6. С. 67-69.