Email this article Control of tuning all combine safety couplings through the drive gears
- Authors: Garanin GV1
-
Affiliations:
- Issue: Vol 76, No 7 (2009)
- Pages: 52-53
- Section: Articles
- URL: https://journals.eco-vector.com/0321-4443/article/view/68676
- DOI: https://doi.org/10.17816/0321-4443-68676
- ID: 68676
Cite item
Full Text
Abstract
The way of adjustment control of all safety clutches of a combine harvester from one rotation shaft through chain and belt drives has been worked out. It includes the shaft halting in turns that gets driving through the checked clutches. Then one shaft is rotated and torques are measured one by one in checked clutches.
References
- Гаранин Г.В. Методы настройки предохранительных муфт в эксплуатационных условиях // Тракторы и сельскохозяйственные машины. - 1990, №5.
Supplementary files
СМИ зарегистрировано Федеральной службой по надзору в сфере связи, информационных технологий и массовых коммуникаций (Роскомнадзор).