Production of high-flexural-strength corundum ceramics

Cover Page

Cite item

Full Text

Abstract

A new method was proposed to produce high-flexural-strength corundum ceramics from α-Al2O3 samples synthesized by heat treatment of boehmite AlOOH at 1300 °C for 5 h. It was shown that hydrothermal treatment of MDGA-grade hydrargillite at 200 °C in a 0.4 wt % magnesium acetate solution for 3 days gives finely crystalline boehmite, which is a feedstock for synthesizing corundum ceramics with a flexural strength of 400 MPa.

About the authors

G. P. Panasyuk

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Author for correspondence.
Email: panasyuk@igis.ras.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

E. A. Semenov

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: panasyuk@igis.ras.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

I. V. Kozerozhets

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: irina135714@yandex.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

M. N. Danchevskaya

Lomonosov Moscow State University

Email: panasyuk@igis.ras.ru
Russian Federation, 1, Leninskie gory, Moscow, 119991

E. S. Lukin

Mendeleev University of Chemical Technology of Russia

Email: panasyuk@igis.ras.ru
Russian Federation, 9, Miusskaya square, Moscow, 125047

V. N. Belan

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: panasyuk@igis.ras.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

I. L. Voroshilov

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: panasyuk@igis.ras.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

L. A. Azarova

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: panasyuk@igis.ras.ru
Russian Federation, 31, Leninsky prospekt, Moscow,119991

A. D. Izotov

Kurnakov Institute of General and Inorganic Chemistry of the Russian Academy of Sciences

Email: panasyuk@igis.ras.ru

Corresponding Member of the Russian Academy of Sciences

Russian Federation, 31, Leninsky prospekt, Moscow,119991

References

  1. Komolikov Yu.I., Kashcheev I.D., Pudov V. I. Influence of the Procedure of Getting of a Highly Dispersed Additive on the Properties of Corundum Ceramics // Refractories and Industrial Ceramics. 2018. Т. 58. В. 6. С. 626-629. doi: 10.1007/s11148-018-0157-9.
  2. Митрошин А. Н., Космынин Д. А. Керамика как материал выбора в эндопротезировании коленного сустава // Известия высших учебных заведений. Поволжский регион. Мед. науки. 2016. № 1 (37). С. 98-110.
  3. Badaev F. Z., Tarasovskii V. P., Novoselov R. A., Khairi A. K., Reznichenko A. V. The Forming of Aluminum-Oxide Ceramics Precursors by Means of Alumina Alloy D16 Chemical Dispersion // Novye Ogneupory. New Refractories. 2015. V. 1. P. 10-13. doi: 10.17073/1683-4518-2015-1-10-13.
  4. Panasyuk G.P., Belan V.N., Voroshilov I.L., Kozerozhets I.V., Luchkov I.V., Kondakov D.F., Demina L. I. The Study of Hydrargillite and Gamma-Alumina Conversion Process in Boehmite in Different Hydrothermal Media // Theor. Foundations of Chemical Eng. 2013. Т. 47. В. 4. С. 415-421 doi: 10.1134/S0040579513040143.
  5. Kostenko V., Pavlov S., Nikolaeva S. Influence of a High-Power Pulsed Ion Beam on the Mechanical Properties of Corundum Ceramics. 6th Int. Conf.: Modern Technologies for Non-Destructive Testing. 2018. Т. 289. UNSP 012019 doi: 10.1088/1757-899X/289/1/012019.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2019 Russian academy of sciences