Multisensory cluster scanning system for roundness testers
- Authors: Epifantsev K.1
-
Affiliations:
- Санкт-Петербургский государственный университет аэрокосмического приборостроения
- Issue: No 4 (235) (2024)
- Pages: 114-118
- Section: Test and measurement
- URL: https://journals.eco-vector.com/1992-4178/article/view/633207
- DOI: https://doi.org/10.22184/1992-4178.2024.235.4.114.118
- ID: 633207
Cite item
Abstract
The article discusses the issue of using a triplex (multisensor) sensor of the capacitive-optical-eddy current type, which has a preliminary conversion system. The sensor was used as an alternative to a contact probe when taking measurements using a RoundTest RA-120P roundness tester.
Full Text
About the authors
K. Epifantsev
Санкт-Петербургский государственный университет аэрокосмического приборостроения
Author for correspondence.
Email: epifancew@gmail.com
к. т. н., доцент
Russian Federation, Санкт-ПетербургReferences
- Гущина Е. А., Епифанцев К. В., Ефремов Н. Ю. Цифровая метрология: учеб.-метод. пособие. СПб: ГУАП, 2022. 104 с.
- Заякин О.А., Манухин А.В., Ростов А.А. Экспериментальный лазерный кругломер, исследование основной погрешности // Известия Самарского научного центра Российской академии наук. 2017. Т. 19. № 6. С. 184–188.
- Епифанцев К. В., Петров Г. А., Белопухов В. Н., Заякин О. А. Исследование возможности применения одновиткового вихретокового датчика для измерения дефектов формы // Инновационное приборостроение. 2024. Т. 3, № 1. С. 63–76. doi: 10.31799/2949-0693-2024-1-63-76.
- Кулманаков Д.С., Пщелко Н.С., Костовский И.П. Многофункциональный емкостной датчик // Наука настоящего и будущего. 2020. Т. 1. С. 122–125.
- Пщелко Н.С., Соколова И.М., Чигирев Д.А. Бесконтактный многофункциональный датчик на основе планарного конденсатора // Техника радиосвязи. 2021. № 3 (50). С. 71–82.
- Пщелко Н.С. Многофункциональный датчик на основе планарного конденсатора для дистанционного зондирования. В кн.: Радиофизика, фотоника и исследование свойств вещества. Тезисы докладов I Российской научной конференции. Омск, 2020. С. 95-96.
- Акчурин Т.Р., Пщелко Н.С., Водкайло Е.Г. Программа для контроля параметров емкостных структур методом вольт-фарадных характеристик. Свидетельство о регистрации программы для ЭВМ RU 2016610272, 11.01.2016. Заявка № 2015660773 от 10.11.2015.
- Novak J.L., Feddema I.T. A capacitance-based proximity sensor for whole arm obstacle avoidance // Proceedings 1992 IEEE International Conference on Robotics and Automation. IEEE, 1992. PP. 1307–1314.
- Schlegl T. et al. Combined capacitive and ultrasonic distance measurement for automotive applications. IEEE sensors journal. 2011. V. 11. No. 11. PP. 2636–2642.
- Боровик С.Ю., Коршиков И.Г., Подлипнов П.Е., Секисов Ю.Н., Скобелев О.П. Способ измерения радиальных зазоров между торцами рабочих лопаток и статором турбомашины и определения температуры рабочей среды в проточной части. Патент на изобретение RU 2674079 C1, 04.12.2018. Заявка № 2017121947 от 21.06.2017.
- Маркелов М.К., Чураков П.П. Устройство с вихретоковым преобразователем для контроля параметров вибрации // Измерительная техника. 2013. № 12. С. 40–43.
- Клюшев А.В. Заявка на изобретение 2006120749/28 (022543) от 15.06.06. Способ вихретокового контроля
- Кирпичев А., Клюшев А., Грошков Е. Интеллектуальные вихретоковые датчиковые системы // Компоненты и технологии. 2009. № 1 (90). С. 22–24.
Supplementary files
Supplementary Files
Action
1.
JATS XML
Download (135KB)
Download (448KB)
4.
Fig. 3. Tests with different types of probes: a - optical probe with oscilloscope and spectrum analyzer; b - capacitive probe with frequency meter and voltmeter; c - eddy current probe with LCR meter
Download (898KB)
5.
Fig. 4. Graphical results after tests with different types of styli: a - optical sensor with oscilloscope and spectrum analyzer; b - capacitive sensor with frequency meter and voltmeter; c - eddy current sensor with LCR-meter.
Download (726KB)
6.
Fig. 5. Dependence of the sensor sensing element capacitance on the distance between the observed object and the surface of the sensitive sensor
Download (44KB)
7.
Fig. 6. Dependence of the output signal of the capacitive sensor on the distance to the metal part
Download (45KB)
Download (120KB)
9.
Fig. 8. Voltage dependence on the gap on the eddy current sensor (1, 2 and 3 - gaps between the part and the sensor)
Download (191KB)
Download (103KB)