Email this article Study of the Influence of the Error in Setting the Angle of Inclination of The Contour Measuring Machine Drive on the Result of Final Measurements: A Vector for Improving the Verification Methodology
- Authors: Epifantsev K.1
-
Affiliations:
- Санкт-Петербургский государственный университет аэрокосмического приборостроения
- Issue: No 4 (2025)
- Pages: 80-83
- Section: Test and measurement
- URL: https://journals.eco-vector.com/1992-4178/article/view/684503
- DOI: https://doi.org/10.22184/1992-4178.2025.245.4.80.83
- ID: 684503
Cite item
Open Access
Access granted
Abstract
The article studies the influence of the error in setting the angle of inclination of the X-axis drive of the Contracer CV-3100 contour measuring machine on the measurement results. Practical recommendations for adjusting the verification methodology and optimizing the design of the device have been formulated.
Full Text
About the authors
K. Epifantsev
Санкт-Петербургский государственный университет аэрокосмического приборостроения
Author for correspondence.
Email: epifancew@gmail.com
к.т.н., доцент
Russian Federation, Санкт-ПетербургReferences
- Гущина Е. А., Ефремов Н. Ю., Епифанцев К. В. Цифровая метрология: учебно-методическое пособие // СПб: ГУАП, 2022. 104 с.
- МП 58193-14 «Контурографы модели 220. Методика поверки» // ФГУП «ВНИИМС», 2014.
Supplementary files
Supplementary Files
Action
1.
JATS XML
2.
Fig. 1. Drive angles and corresponding measurement results of the same loop parameters using the FormTracePak software of the Contracer CV-3100 instrument
Download (82KB)
3.
Fig. 2. Contracer CV-3100 contrograph reference standard
Download (1MB)
4.
Fig. 3. Fragment of the document MP 58193-14 “Contrographs model 220. Verification procedure”
Download (285KB)
5.
Fig. 4. Measure for verification of surface contour measuring devices KN 100
Download (1MB)
6.
Table 1_Fig. 1
Download (167KB)
7.
Table 2_Fig. 2
Download (118KB)
8.
Table 1_Fig. 3
Download (130KB)
9.
Table 1_Fig. 4
Download (72KB)
10.
Table 2_Fig. 1
Download (82KB)
11.
Table 2_Fig. 2
Download (85KB)
12.
Table 2_Fig. 3
Download (116KB)
13.
Table 2_Fig. 4
Download (93KB)
14.
Fig. 5. Graphical representation of the obtained measurement results of the first (a) and second (b) batches of parts on the contrograph Soptgaseg CV-3100.
Download (61KB)
