Мақаланы E-mail арқылы жіберу Technologies that open up new opportunities not just in theory but in practice. Visit to additive technology center of dipaul group
- Авторлар: Kovalevsky Y.
- Шығарылым: № 6 (2025)
- Беттер: 44-55
- Бөлім: Report From A Company
- URL: https://journals.eco-vector.com/1992-4178/article/view/688747
- DOI: https://doi.org/10.22184/1992-4178.2025.247.6.44.54
- ID: 688747
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Толық мәтін
Қосымша файлдар
Қосымша файлдар
Әрекет
1.
JATS XML
2.
Alexey Simakov
Жүктеу (269KB)
3.
The EP-A650 SLA printing unit (top) and its product formation table (bottom)
Жүктеу (465KB)
4.
SLA Printing Installation iSLA-450Pro
Жүктеу (204KB)
5.
Ultrasonic cleaning bath
Жүктеу (130KB)
6.
UV curing cabinets
Жүктеу (88KB)
7.
Examples of products obtained using SLA technology
Жүктеу (168KB)
8.
Installation of SLS printing EP-P420
Жүктеу (215KB)
9.
Working chamber of the EP-P420 installation
Жүктеу (154KB)
10.
Cube with printed part on lift
Жүктеу (124KB)
11.
Compartment for cleaning the part from unsintered powder
Жүктеу (155KB)
12.
Powder sifting and mixing section
Жүктеу (163KB)
13.
Examples of housing parts of electronic equipment made of polyamide, obtained by SLS printing
Жүктеу (202KB)
14.
Flashforge FDM printers
Жүктеу (219KB)
15.
Small-scale photopolymer printing units
Жүктеу (182KB)
16.
Metal Printing Machine Using SLM Technology EP-M300
Жүктеу (268KB)
17.
Titanium Build Platform
Жүктеу (131KB)
18.
Build platforms with support structures removed: before sanding (foreground) and sanded (background)
Жүктеу (286KB)
19.
SLM Printing Installation EP-M150Pro
Жүктеу (260KB)
20.
MX-Lab DMT printer with six powder loading tanks
Жүктеу (82KB)
21.
A sample of a nozzle unit printed using the SLM method from Inconel 625 alloy. The section shows cooling channels, which are extremely difficult to manufacture using traditional technologies
Жүктеу (180KB)
22.
An SLM-printed turbine element before grinding. It is quite difficult to obtain such blade geometry by milling due to limitations associated with the cutter entry
Жүктеу (143KB)
23.
A part produced using SLM technology after grinding
Жүктеу (105KB)
24.
Working on a model obtained from 3D scanning
Жүктеу (249KB)
