Enviar artigo por via de e-mail Technologies that open up new opportunities not just in theory but in practice. Visit to additive technology center of dipaul group
- Autores: Kovalevsky Y.
- Edição: Nº 6 (2025)
- Páginas: 44-55
- Seção: Report From A Company
- URL: https://journals.eco-vector.com/1992-4178/article/view/688747
- DOI: https://doi.org/10.22184/1992-4178.2025.247.6.44.54
- ID: 688747
Citar
Texto integral
Acesso aberto
Acesso está concedido
Acesso é pago ou somente para assinantes
Texto integral
Sobre autores
Yu. Kovalevsky
Autor responsável pela correspondência
Email: journal@electronics.ru
Rússia
Arquivos suplementares
Arquivos suplementares
Ação
1.
JATS XML
2.
Alexey Simakov
Baixar (269KB)
3.
The EP-A650 SLA printing unit (top) and its product formation table (bottom)
Baixar (465KB)
4.
SLA Printing Installation iSLA-450Pro
Baixar (204KB)
5.
Ultrasonic cleaning bath
Baixar (130KB)
6.
UV curing cabinets
Baixar (88KB)
7.
Examples of products obtained using SLA technology
Baixar (168KB)
8.
Installation of SLS printing EP-P420
Baixar (215KB)
9.
Working chamber of the EP-P420 installation
Baixar (154KB)
10.
Cube with printed part on lift
Baixar (124KB)
11.
Compartment for cleaning the part from unsintered powder
Baixar (155KB)
12.
Powder sifting and mixing section
Baixar (163KB)
13.
Examples of housing parts of electronic equipment made of polyamide, obtained by SLS printing
Baixar (202KB)
14.
Flashforge FDM printers
Baixar (219KB)
15.
Small-scale photopolymer printing units
Baixar (182KB)
16.
Metal Printing Machine Using SLM Technology EP-M300
Baixar (268KB)
17.
Titanium Build Platform
Baixar (131KB)
18.
Build platforms with support structures removed: before sanding (foreground) and sanded (background)
Baixar (286KB)
19.
SLM Printing Installation EP-M150Pro
Baixar (260KB)
20.
MX-Lab DMT printer with six powder loading tanks
Baixar (82KB)
21.
A sample of a nozzle unit printed using the SLM method from Inconel 625 alloy. The section shows cooling channels, which are extremely difficult to manufacture using traditional technologies
Baixar (180KB)
22.
An SLM-printed turbine element before grinding. It is quite difficult to obtain such blade geometry by milling due to limitations associated with the cutter entry
Baixar (143KB)
23.
A part produced using SLM technology after grinding
Baixar (105KB)
24.
Working on a model obtained from 3D scanning
Baixar (249KB)
