Enviar artigo por via de e-mail Structural materials to ensure electromagnetic compatibility of radio equipment
- Autores: Grishin D.1, Gusev I.1
-
Afiliações:
- АО «ТЕСТПРИБОР»
- Edição: Nº 5 (2023)
- Páginas: 82-86
- Seção: Design solutions
- URL: https://journals.eco-vector.com/1992-4178/article/view/631933
- DOI: https://doi.org/10.22184/1992-4178.2023.226.5.82.86
- ID: 631933
Citar
Texto integral
Acesso aberto
Acesso está concedido
Acesso é pago ou somente para assinantes
Resumo
The article discusses the main structural materials used for electromagnetic shielding, such as gaskets, contact springs, fabrics, heat shrink tubes, RF radiation absorbers. A technique for confirming the characteristics of shielding materials in TESTPRIBOR JSC EMC laboratory is described.
Texto integral
Sobre autores
D. Grishin
АО «ТЕСТПРИБОР»
Autor responsável pela correspondência
Email: journal@electronics.ru
лаборатория ЭМС, инженер-испытатель
RússiaI. Gusev
АО «ТЕСТПРИБОР»
Email: journal@electronics.ru
лаборатория ЭМС, инженер-испытатель
RússiaBibliografia
- Pospisilik M., Drofova I., Kovar S., Dulik T., Tesacek A. Construction of a Generator for Power Frequency Magnetic Field Immunity Test. 2023. 33rd International Conference Radioelektronika (RADIOELEKTRONIKA). 19–20 April 2023.
- Pospisilik M. Introduction to Electromagnetic Compatibility for Electronic Engineers… and not only for them. – Zlin: Tomas Bata University in Zlin. 2019.
- IMO Resolution A.813(19) – General Requirements for Electromagnetic Compatibility (EMC) for all Electrical and Electronic Ships Equipment – (Adopted on 23 November 1995).
- Standard MIL-STD-285 Attenuation Measurements for Enclosures and Electromagnetic Shielding.
Arquivos suplementares
Arquivos suplementares
Ação
1.
JATS XML
2.
Fig. 1. Contact springs
Baixar (481KB)
3.
Fig. 2. Wire mesh pad
Baixar (584KB)
4.
Fig. 3. Braided wire tape
Baixar (249KB)
5.
Fig. 4. Elastomer shielding gaskets
Baixar (346KB)
6.
Fig. 5. Spiral tubes
Baixar (197KB)
7.
Fig. 6. Fabric conductive pads
Baixar (305KB)
8.
Fig. 7. Shielding foil
Baixar (233KB)
9.
Fig. 8. Screened glass
Baixar (504KB)
10.
Fig. 9. Shielding heat shrink tubes
Baixar (388KB)
11.
Fig. 10. RF radiation absorbers with an adhesive layer
Baixar (272KB)
12.
Fig. 11. Dependence of gain on frequency for an amplifier with AGC
Baixar (184KB)
13.
Fig. 12. Scheme for measuring the coupling coefficient between antennas
Baixar (243KB)
14.
Fig. 13. Scheme for measuring the shielding coefficient of material samples
Baixar (232KB)
