Enviar artigo por via de e-mail New home of the leading Russian producer of chemicals and equipment for bare board manufacture Visit to the production facility of St. Petersburg center ELMA LLC
- Autores: Kovalevsky Y.
- Edição: Nº 2 (2025)
- Páginas: 50-62
- Seção: Report From A Company
- URL: https://journals.eco-vector.com/1992-4178/article/view/680324
- DOI: https://doi.org/10.22184/1992-4178.2025.243.2.50.62
- ID: 680324
Citar
Texto integral
Acesso aberto
Acesso está concedido
Acesso é pago ou somente para assinantes
Texto integral
Sobre autores
Y. Kovalevsky
Autor responsável pela correspondência
Email: redactor@electronics.ru
Rússia
Arquivos suplementares
Arquivos suplementares
Ação
1.
JATS XML
2.
1
Baixar (960KB)
3.
In the design department of the company
Baixar (563KB)
4.
Alexandra Grigorieva
Baixar (713KB)
5.
Dmitry Kolesnichenko
Baixar (601KB)
6.
Raw materials warehouse
Baixar (846KB)
7.
In the chemical production laboratory
Baixar (247KB)
8.
Chemical Research Laboratory
Baixar (782KB)
9.
Cyclic voltammetry complex
Baixar (290KB)
10.
Micro-grinding equipment: a coordinate milling machine (in the foreground) and a grinding machine
Baixar (421KB)
11.
The complex of microslift research
Baixar (393KB)
12.
Workplace for process research in small volume tanks
Baixar (340KB)
13.
The coupon is in a glass with the test solution
Baixar (279KB)
14.
Development of the galvanic copper plating process with a new additive, which is being prepared for market launch
Baixar (318KB)
15.
Reactor overpass
Baixar (586KB)
16.
One of the reactors. A liquid level measuring bar and a local hood are visible from above.
Baixar (205KB)
17.
Arbitration trials
Baixar (325KB)
18.
Warehouse of finished products
Baixar (933KB)
19.
Mikhail Karpov
Baixar (667KB)
20.
Installation of soldering mask application through a grid
Baixar (302KB)
21.
Setting up the exposure
Baixar (226KB)
22.
Installation of jet-flare soldering mask application
Baixar (366KB)
23.
Loading test boards into the thermal storage cabinet
Baixar (238KB)
24.
Solder Mask Test Boards
Baixar (170KB)
25.
The Bead Mill
Baixar (337KB)
26.
Three-roll mill. In the foreground is a drum into which the material is fed.
Baixar (433KB)
27.
Dmitry Glebko
Baixar (467KB)
28.
Cutting of polypropylene sheet on a CNC machine
Baixar (411KB)
29.
One of the baths of the line is in the manufacturing process
Baixar (857KB)
30.
Butt welding of the bath body
Baixar (531KB)
31.
Extrusion welding
Baixar (302KB)
32.
A hand-welded seam with a hair dryer
Baixar (106KB)
33.
The mechanism of the drive conveyor on a polypropylene support
Baixar (279KB)
34.
Metalworking site
Baixar (617KB)
35.
Welding of metal structures
Baixar (287KB)
36.
At the turning and milling site
Baixar (369KB)
37.
At the turning and milling site
Baixar (322KB)
38.
Electrical installation site
Baixar (398KB)
39.
The Elgamet line at the final stage of assembly
Baixar (856KB)
40.
Elgamet line control cabinet
Baixar (747KB)
41.
L2O installations: on the left – during the assembly process; in the center – at the test stage; on the right – the finished installation awaiting dealer acceptance
Baixar (76KB)
