Мақаланы E-mail арқылы жіберу New home of the leading Russian producer of chemicals and equipment for bare board manufacture Visit to the production facility of St. Petersburg center ELMA LLC
- Авторлар: Kovalevsky Y.
- Шығарылым: № 2 (2025)
- Беттер: 50-62
- Бөлім: Report From A Company
- URL: https://journals.eco-vector.com/1992-4178/article/view/680324
- DOI: https://doi.org/10.22184/1992-4178.2025.243.2.50.62
- ID: 680324
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Толық мәтін
Қосымша файлдар
Қосымша файлдар
Әрекет
1.
JATS XML
2.
1
Жүктеу (960KB)
3.
In the design department of the company
Жүктеу (563KB)
4.
Alexandra Grigorieva
Жүктеу (713KB)
5.
Dmitry Kolesnichenko
Жүктеу (601KB)
6.
Raw materials warehouse
Жүктеу (846KB)
7.
In the chemical production laboratory
Жүктеу (247KB)
8.
Chemical Research Laboratory
Жүктеу (782KB)
9.
Cyclic voltammetry complex
Жүктеу (290KB)
10.
Micro-grinding equipment: a coordinate milling machine (in the foreground) and a grinding machine
Жүктеу (421KB)
11.
The complex of microslift research
Жүктеу (393KB)
12.
Workplace for process research in small volume tanks
Жүктеу (340KB)
13.
The coupon is in a glass with the test solution
Жүктеу (279KB)
14.
Development of the galvanic copper plating process with a new additive, which is being prepared for market launch
Жүктеу (318KB)
15.
Reactor overpass
Жүктеу (586KB)
16.
One of the reactors. A liquid level measuring bar and a local hood are visible from above.
Жүктеу (205KB)
17.
Arbitration trials
Жүктеу (325KB)
18.
Warehouse of finished products
Жүктеу (933KB)
19.
Mikhail Karpov
Жүктеу (667KB)
20.
Installation of soldering mask application through a grid
Жүктеу (302KB)
21.
Setting up the exposure
Жүктеу (226KB)
22.
Installation of jet-flare soldering mask application
Жүктеу (366KB)
23.
Loading test boards into the thermal storage cabinet
Жүктеу (238KB)
24.
Solder Mask Test Boards
Жүктеу (170KB)
25.
The Bead Mill
Жүктеу (337KB)
26.
Three-roll mill. In the foreground is a drum into which the material is fed.
Жүктеу (433KB)
27.
Dmitry Glebko
Жүктеу (467KB)
28.
Cutting of polypropylene sheet on a CNC machine
Жүктеу (411KB)
29.
One of the baths of the line is in the manufacturing process
Жүктеу (857KB)
30.
Butt welding of the bath body
Жүктеу (531KB)
31.
Extrusion welding
Жүктеу (302KB)
32.
A hand-welded seam with a hair dryer
Жүктеу (106KB)
33.
The mechanism of the drive conveyor on a polypropylene support
Жүктеу (279KB)
34.
Metalworking site
Жүктеу (617KB)
35.
Welding of metal structures
Жүктеу (287KB)
36.
At the turning and milling site
Жүктеу (369KB)
37.
At the turning and milling site
Жүктеу (322KB)
38.
Electrical installation site
Жүктеу (398KB)
39.
The Elgamet line at the final stage of assembly
Жүктеу (856KB)
40.
Elgamet line control cabinet
Жүктеу (747KB)
41.
L2O installations: on the left – during the assembly process; in the center – at the test stage; on the right – the finished installation awaiting dealer acceptance
Жүктеу (76KB)
