Email this article Studies of Microcutting Kinematics on Designing Grinding Heads to Form the Sealing Surfaces on the Parts of Pipe Fitting
- Authors: Gaysin SN1, Tsvik LB2, Mukhin SV3, Travin DV3
-
Affiliations:
- Irkutsk State Technical University
- Irkutsk State University of Railway Engineering
- Issue: Vol 5, No 2 (2011)
- Pages: 116-123
- Section: Articles
- URL: https://journals.eco-vector.com/2074-0530/article/view/69900
- DOI: https://doi.org/10.17816/2074-0530-69900
- ID: 69900
Cite item
Full Text
Abstract
Authors study technologies of grinding sealing surfaces of pipe fitting saddles. The aim of research is to reduce complexity and improve the quality of the repair by mechanization of finishing stages of this process. In the present work mechanization is exercised due mobile grinding and lapping devices, the authors offered appropriate theoretical model of the kinematic process of microcutting for the circular motion of the oscillating plane-grinding or lapping disks.
Keywords
About the authors
S N Gaysin
Irkutsk State Technical University
Email: gaisinsn@mail.ru
8 964 655 21 28; НИ ИрГТУ; Irkutsk State Technical University
L B Tsvik
Irkutsk State University of Railway Engineeringд.т.н. проф; ИрГУПС; Irkutsk State University of Railway Engineering
S V Mukhin
D V Travin
References
- Калашников В.А. Оборудование и технологии ремонта трубопроводной арматуры. - М.: Машиностроение, 2001. -232 с., ил.
- Патент №2106951 (РФ) БИ №8. 1998.
- Сейнов С.В. Задвижки клиновые. Использование. Техническое обслуживание. Ремонт: Справочное пособ./ С.В. Сейнов, Ю.С. Сейнов. - М.: Инструмент, 2003. - 144 с.
- Гайсин С.Н., Балакирев В.А., Травин Д.В. О применении мобильных шлифовально-притирочных устройств в технологическом процессе восстановления уплотнительных поверхностей элементов трубопроводной арматуры // Научный рецензируемый журнал. - М., МГТУ «МАМИ», № 2 (10), 2010. - с. 118-124.
Supplementary files
