SYNTACTIC POLY MERIC COMPOSITE MATERIALS HIGHLY COMPLETED WITH GRANULATED FOAM GLASS


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

It is proposed to use granular foam glass as an alternative aggregate for syntactic composite materials. Studies have been carried out on the preparation and physical-mechanical properties of composite materials with aggregate made of granular foam glass and a high degree of filling. To create compositions, binders based on polyester and polyurethane matrices were used. During compression in the cylinder of granular foam glass, a mechanism for the destruction of granules was revealed and the conditions for producing highly filled composites were established. The influence of the nature of the binder and the pressing pressure of the workpiece on the apparent density and strength of the resulting composite materials was studied.

Texto integral

Acesso é fechado

Sobre autores

Iurii Ketov

Perm National Research Polytechnic University

Email: ketov1992@list.ru
postgraduate Perm, Russian Federation

Stanislav Slovikov

Perm National Research Polytechnic University

Email: sslovikov@ya.ru
candidate of Engineering Sciences, senior research Perm, Russian Federation

Bibliografia

  1. Jayavardhan M.L., Mrityunjay D. Quasi-static compressive response of compression molded glass microballoon/HDPE syntactic foam // Composites. Part B: Engineering. Vol. 149. P. 165-177.
  2. Porfiri M., Gupta N. Effect of V. fraction and wall thickness on the elastic properties of hollow particle filled composites // Composites. Part B: Engineering. Vol. 40. № 2. P. 166-173.
  3. Буланов И.М., Воробей В.В. Технология ракетных и аэрокосмических конструкций из композиционных материалов. М.: МГТУ им. Н.Э. Баумана, 1998. 516 с.
  4. Bai C., Li H., Bernardo E., Colombo P. Waste-to-resource preparation of glass-containing foams from geopolymers // Ceramics International. 2019. Vol. 45. № 6. P. 7196-7202. URL: https://doi. org/10.1016/j.ceramint.2018.12.227
  5. Демидович Б.К. Производство и применение пеностекла. Минск: Наука и техника, 1972. 301 с.
  6. Vaisman I., Ketov A., Ketov I. Cellular glass obtained from non-powder preforms by foaming with steam // Ceramics International. 2016. Vol. 42. № 14. Р. 15261-15268. URL: https://doi.org/10.1016/j. ceramint.2016.06.165
  7. König J., Petersen R.R., Iversen N., Yue Y. Suppressing the effect of cullet composition on the formation and properties of foamed glass // Ceramics International. 2018. Vol. 44. № 10. Р. 11143-11150. URL: https://doi.org/10.1016/j.ceramint.2018.03.130
  8. Nazeran N., Moghaddas J. Synthesis and characterization of silica aerogel reinforced rigid polyurethane foam for thermal insulation application // J. Non-Crystalline Solids. 2017. Vol. 461. Р. 1-11. URL: https://doi.org/10.1016/j.jnoncrysol.2017.01.037
  9. Гавриленко С.Л., Шилько С.В. Анализ прочности сферических гранул методами механик и контактного взаимодействия // Механика машин, механизмов и материалов. 2014. № 2 (27). С. 56-59.
  10. Smirnov A., Ponomarev S., Vasin A. Dense Packing of Poly-Fractional Powder of Ceramic Materials // International Conference on Modern Trends in Manufacturing Technologies and Equipment 2018: Materials Today Processing. 2019. Vol. 11. Part 1. Р. 504-509. URL: https://doi.org/10.1016/j.matpr.2019.01.021
  11. Zhao B., An X., Wang Y., Qian Q., Yang X., Sun X. DEM dynamic simulation of tetrahedral particle packing under 3D mechanical vibration // Powder Technology. 2017. Vol. 317. Р. 171-180. URL: https://doi.org/10.1016/j.powtec.2017.04.048
  12. Haitao Geng, Jiachen Liu, Anran Guo, Sue Ren, Xiqing Xu, Shan Liu. Fabrication of heat-resistant syntactic foams through binding hollow glass microspheres with phosphate adhesive // Materials & Design. 5 April 2016. V. 95. Р. 32-38. URL: https://doi.org/10.1016/j. matdes.2016.01.108
  13. Pinisetty D., Shunmugasamy V.C., Gupta N. Hollow Glass Microspheres for Plastics, Elastomers, and Adhesives Compounds // Plastics Design Library. 2015. Р. 147-174. URL: https://doi. org/10.1016/B978-1-4557-7443-2.00006-2
  14. Ren S., Li X., Zhang X., Xu X., Dong X., Liu J., Du H., Guo A. Mechanical properties and high-temperature resistance of the hollow glass microspheres/borosilicate glass composite with different particle size // J. Alloys and Compounds. 2017. Vol. 722. Р. 321-329. URL: https://doi.org/10.1016/j.jallcom.2017.06.092
  15. Zhang L., Ma J. Effect of coupling agent on mechanical properties of hollow carbon microsphere/phenolic resin syntactic foam // Composites Scienceand Technology. 2010. Vol. 70. № 8. Р. 1265-1271. URL: https://doi.org/10.1016/j.compscitech.2010.03.016

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
Baixar


Este site utiliza cookies

Ao continuar usando nosso site, você concorda com o procedimento de cookies que mantêm o site funcionando normalmente.

Informação sobre cookies