Email this article PREDICTING OF A COMPOSITE ANGLE ELEMENT WARPAGEDUE TO INDUCED STRESS PROCESS
- Authors: Burov A.E.1, Burov AE1
-
Affiliations:
- Issue: Vol 12, No 3 (2011)
- Pages: 136-140
- Section: Articles
- URL: https://journals.eco-vector.com/2712-8970/article/view/516442
- ID: 516442
Cite item
Full Text
Abstract
The article presents experimental and numerical analysis results of induced stress-strain state in the process
of manufacturing of a piece of composite material.
of manufacturing of a piece of composite material.
References
- Виноградов В. М. Остаточные напряжения в деталях из пластических масс // Пластические массы. 1975. № 4. С. 20-31.
- O'Neill J. M., Rogers T. G., Spencer A. J. M. Thermally induced distortions in the moulding of laminated channel sections // Mathematical Engineering in Industry. 1988. Vol. 2. P. 65-72.
- Dykes R. J., Horrigan D. P. W., Bhattacharryya D. Numerical analysis of shape fixability of continuous fibre reinforced thermoplastics // Composites Processing and Microstructure. 1997. Vol. 4. ICCM-11. Cambridge, UK. P. 352-359.
- Jain L. K., Mai Y.-W. Stress and deformation induced during manufacturing. Part II: A study of the spring-in phenomenon // Journal of Composite Materials. 1997. Vol. 31. P. 696-712.
- Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts / G. Fernlund, N. Rahman, R. Courdji [et al.] // Composites Part A. 2002. Vol. 33. P. 341-351.
- Thermoviscoelastic anisotropic analysis of process induced residual stresses and dimensional stability in real polymer matrix composite components / S. Clifford, N. Jansson, W. Yu [et al.] // Composites Part A. 2006. Vol. 37. P. 538-545.
- Сметанников О. Ю., Труфанов Н. А. Численный анализ технологических и остаточных напряжений в стеклующихся телах // Вычислительная механика сплошной среды. 2008. Т. 1. № 1. С. 92-108.
- Ильюшин А. А. Труды. Т. 3. Теория термовязкоупругости. М. : Физматлит, 2007.
- Кристенсен Р. Введение в механику композитов. М. : Мир, 1982.
- Bapanapalli S. K., Smith L. V. A linear finite element model to predict processing-induced distortion in FRP laminates // Composites: Part A. 2005. Vol. 36. Р. 1666-1674.
- Zocher M. A., Groves S. E., Allen D. H. A threedimensional finite element formulation for thermoviscoelastic orthotropic media // Int. J. Numer. Meth. Eng. 1997. Vol. 40. P. 2267-2288.
Supplementary files
