Vol 82, No 3 (2015)

Articles

Improvement of environmental performance of tractor diesel by the use of compressed natural gas and exhaust gas recirculation, methanol and ethanol fuel emulsions

Likhanov V.A., Lopatin O.P.

Abstract

Possibility of improving environmental performance of diesel engine by the use of compressed natural gas and exhaust gas recirculation, methanol and ethanol fuel emulsions is determined. It allows to reduce nitrogen oxides level in exhaust gases, to save diesel fuel and to improve effective performance.
Tractors and Agricultural Machinery. 2015;82(3):3-6
pages 3-6 views

Overcoming vertical obstacles and ditches by car and wheeled tractor

Mamiti G.I., Pliyev S.K., Vasilyev V.G.

Abstract

Functional dependencies between all relevant parameters of wheeled vehicles of different drive types and driving conditions with maximum height of obstacle and width of ditch are obtained for the first time. The dependencies allow to ensure at the design stage the optimum axle weight distribution of machine for specified operating conditions, and thus maximum possible traction force and cross-country ability. The influence of resistance of motion on cross-country ability of wheeled vehicle is shown by specific example.
Tractors and Agricultural Machinery. 2015;82(3):7-10
pages 7-10 views

To the problem of power distribution between the wheels of mobile machine

Keller A.V., Pozin B.M., Troyanovskaya I.P., Bondar V.N., Yusupov A.A.

Abstract

The paper deals with the problem of minimization of power for mobile machine movement by means of its distribution between wheels. Comparison of total required power values is made by the examples of most common methods of mobile machine control, namely using of unblocked differential, limited-slip differential, full blocking of differentials.
Tractors and Agricultural Machinery. 2015;82(3):10-12
pages 10-12 views

Method for selection of rational parameters of suspension system of high-speed tracked vehicle

Savochkin V.A., Sharipov V.M., Smirnov I.A., Shishanov S.M., Tarasova L.I.

Abstract

General optimization scheme for suspension system of high-speed tracked vehicle is presented. On its basis, a method for selection of rational parameters of suspension system is developed.
Tractors and Agricultural Machinery. 2015;82(3):12-18
pages 12-18 views

Selection of geometrical characteristics of diesel injectors’ sprayers

Markov V.A., Devyanin S.N., Loboda S.S.

Abstract

Alternative designs of diesel injectors’ sprayers are considered. Advantages of sprayers with tangential spraying nozzles are shown. Research on optimization of geometric proportions of the sprayer’s elements was conducted.
Tractors and Agricultural Machinery. 2015;82(3):19-22
pages 19-22 views

Design improvement of bearing unit of turbocharger of internal combustion engine

Nikishin V.N., Luscheko V.A.

Abstract

Results of calculation and experimental research of thermal and strain state and oil consumption in turbocharger bearing unit are presented. Recommendations for the improvement of bearing unit design are given.
Tractors and Agricultural Machinery. 2015;82(3):22-27
pages 22-27 views

Aerodynamic configurations, characteristics and application of transverse fans

Sychugov N.P.

Abstract

Aerodynamic configurations and characteristics of transverse fans are given. Their advantages in comparison with radial and axial fans are determined. In particular, transverse fans may have different width under the same rational configuration. Due to it, when recalculating the characteristic by similarity method, the field of their application is significantly enlarged.
Tractors and Agricultural Machinery. 2015;82(3):27-33
pages 27-33 views

Results of field researches of a seed drill equipped with sowing devices with asymmetrical profile of seed cells

Machnev A.V., Machnev V.A., Khorev P.N., Khorev A.N.

Abstract

A seed drill equipped with sowing devices with asymmetrical profile of seed cells and with a ledge in the form of hypocycloid has been developed and made. Optimum values of design parameters of seed roller in actual practice are determined. Original methods for determination of seeds distribution in a row and crushing of seeds in laboratory and field conditions are given.
Tractors and Agricultural Machinery. 2015;82(3):33-37
pages 33-37 views

Exploitation effects of using minerals as active agents of lubricants

Dolgopolov K.N., Lyubimov D.N., Pustovoy I.F., Shabanov A.Y., Kolesnikov I.V.

Abstract

On the results of bench tests of serpentine additives to lubricants for internal combustion engines of various types the main exploitation effects of that kind of substances as a new class of raw materials for chemmotology are generalized. It is concluded that minerals belong to the classification group of friction modifiers. Calculation models and ways to increase the affinity of components of mineral additives to metals providing longevity of formed protective coatings are considered.
Tractors and Agricultural Machinery. 2015;82(3):38-44
pages 38-44 views

Modeling of reliability when designing soil cutting parts of agricultural machines

Myalenko V.I.

Abstract

A method for forecasting of reliability when creating new designs of soil cutting parts of agricultural machines by using volumetric diagrams of their real loading is suggested.
Tractors and Agricultural Machinery. 2015;82(3):44-47
pages 44-47 views

Point estimation of distribution parameters of overhaul period of imported hydraulic valves for agricultural machinery

Velichko S.A., Martynov A.V.

Abstract

As a result of researches of operational reliability of imported hydraulic valves in ordinary conditions of operation, lower confidence limit of the average value of operating life for the general mean failure time corresponding to specified confidence probability was determined.
Tractors and Agricultural Machinery. 2015;82(3):47-49
pages 47-49 views

Restoring of moldboards by abrasion-resistant dispersion-strengthened composite based on epoxy resin

Mikhalchenkov A.M., Solovyev R.Y., Biryulina Y.Y.

Abstract

A method of plough bodies’ moldboards restoring is proposed. With the view of implementation of the method a composite adhesive polymer dispersion-strengthened material based on epoxy resin is developed.
Tractors and Agricultural Machinery. 2015;82(3):49-51
pages 49-51 views

The 80th anniversary of V.G. Chernikov

- -.

Abstract

24 февраля 2015 г. видному ученому в области механизации льноводства члену-корреспонденту РАН, д-ру техн. наук, проф. Виктору Григорьевичу Черникову исполнилось 80 лет.
Tractors and Agricultural Machinery. 2015;82(3):52
pages 52 views


This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies