Vol 76, No 8 (2009)

Articles

State of agricultural machinery industry in Russia and measures for development of the branch

Babkin K.A.

Abstract

В июне 2010 г. в офисе Союзагромаша прошла пресс-конференция, посвященная предстоящей Международной специализированной выставке с.-х. техники «Агросалон-2009», официальное открытие которой состоится 16 сентября. С сообщением о тенденциях и факторах сельхозмашиностроения и рынка с.-х. техники перед собравшимися выступил президент Союзагромаша К.А. Бабкин. Читателям предлагаются основные моменты выступления К.А. Бабкина в форме презентации.
Tractors and Agricultural Machinery. 2009;76(8):3-4
pages 3-4 views

Experimental beet drill with spring-loaded seed pusher

Laryushin N.P., Kukharev O.N., Semov I.N.

Abstract

During the sowing by grain drill with the mechanical seed distributor the sugar beet seeds are damaged by hard seed ejektor blade (till 7%). This leads to the reduction of sugar beet yields. The development of seed distributor with spring-loaded seed ejector blade will help to solve the foregoing problem.
Tractors and Agricultural Machinery. 2009;76(8):5-8
pages 5-8 views

Grain stubble drill СЗС-2,8

- -.

Abstract

На Алтайской государственной зональной МИС прошла приемочные и сертификационные испытания зерновая стерневая сеялка СЗС-2,8, разработанная специалистами отдела главного конструктора ОАО «НПО «Сибсельмаш» и запущенная в серийное производство.
Tractors and Agricultural Machinery. 2009;76(8):8-
pages 8- views

Effectiveness of providing wheeled tractors with traction-and-additionally loading device

Grebnev V.P., Vorokhobin A.V.

Abstract

Проанализированы тягово-сцепные устройства различных типов для колесных универсально-пропашных тракторов. Предложена конструкция тягово-догружающего устройства, обеспечивающего не только функцию тяги, но и увеличение сцепного веса трактора.
Tractors and Agricultural Machinery. 2009;76(8):9-11
pages 9-11 views

Dynamics of straightforward operational movement of caterpillar plowing machine-and-tractor unit and a possibility of its decreasing

Ivantsov V.D., Chernyshov K.V., Dolgov I.A., Ivantsov A.V.

Abstract

Приведены результаты анализа динамики вынужденных колебаний остова гусеничного пахотного трактора от воздействия неравномерности тягового сопротивления плуга вследствие нестабильности глубины вспашки. Дана схема динамической модели пахотного МТА на базе серийного гусеничного трактора общего назначения с полунавесным лемешным плугом. Представлены основные конструкционные и эксплуатационные параметры гусеничного трактора ВТ-175Д с серийным прицепным устройством и результаты расчетов параметров его динамической модели на вспашке.
Tractors and Agricultural Machinery. 2009;76(8):12-15
pages 12-15 views

Frequency-and-dispersive index for assessment of out-of-straightness of cultivated crop rows

Nadykto V.T., Nazarova O.P., Chernaya T.S.

Abstract

Methodical bases of cultivated crop rows out-of-straightness assessment by the new frequency-and-dispersive index are expounded.
Tractors and Agricultural Machinery. 2009;76(8):15-17
pages 15-17 views

Two-channel energetic chain of aggregate with electromechanical transmission

Levtsev A.P., Dushutin K.A.

Abstract

Рассмотрена оптимизация конструкционных параметров по демпфирующим свойствам каналов передачи мощности на примере с.-х. агрегата с электромеханической трансмиссией и двумя каналами передачи мощности (технологическим и ходовым). Получены выражения для расчета частотных характеристик как отдельных каналов передачи мощности, так и всей цепи.
Tractors and Agricultural Machinery. 2009;76(8):17-21
pages 17-21 views

Control of internal combustion engine regimes with the use of mathematical model

Makushin A.A., Zubkov E.V., Bakhvalova V.S., Ilyukhin A.N.

Abstract

Using mathematical models of internal combustion engines without forced aspiration and with an independent turbo-supercharging the decision of a return problem of definition of conveyance lath a fuel pump from a bent shaft rotary speed is received. Factors of the differential equation describing condition of internal combustion engines are defined. Control circuit of conveyance lath a fuel pump based on mathematical models was developed.
Tractors and Agricultural Machinery. 2009;76(8):21-23
pages 21-23 views

Vibration isolation properties of two-stage suspension

Ryabov I.M., Chernyshov K.V., Kovalev A.M.

Abstract

На основании результатов предварительного исследования двухступенчатой подвески установлено, что по сравнению с традиционной подвеской она не дает существенного улучшения виброзащитных свойств. Отмечается, что двухступенчатая подвеска может оказаться эффективной для повышения устойчивости движения машины.
Tractors and Agricultural Machinery. 2009;76(8):23-26
pages 23-26 views

Disassemblingless testing internal combustion engine on the base of energetic method for determination of its rotating parts inertia moment

Yegorov A.V., Kozlov K.E.

Abstract

Разработан энергетический способ определения момента инерции вращающихся масс ДВС транспортного средства. Предлагается автономный аппаратно-программный комплекс для измерения угловых ускорений коленчатого вала ДВС.
Tractors and Agricultural Machinery. 2009;76(8):26-28
pages 26-28 views

An accuracy of adaptive friction couplings triggering

Shishkarev M.P.

Abstract

It is displayed that at a stationary condition of a loading wear of an adaptive friction coupling occurs at a torque equal to a nominal torque of a clutch, and clutches with a variable quantity of an amplification factor of a return coupling demand for wear increase in external loading in relation to a nominal torque.
Tractors and Agricultural Machinery. 2009;76(8):29-32
pages 29-32 views

Increasing resource of active type sealing connections by modification of mounting places

Vodyakov V.N., Kuznetsov V.V., Berezin M.A., Borisov V.I.

Abstract

A modified design of sealing compound is presented. It allows to secure the significant resource increase of fixed sealing compounds on the basis of round section seals. Increased resource of the sealing compound is achieved so that additional annual grooves with a cross-section of an ellipse form with large segments of the axis are carried out. They are made symmetrically to the walls of the rectangular groove on the bottom of rectangular section groove and in the principal detail. It reduces relaxation speed of the contact stresses in the seal. High exploitational proofs are theoretically and experimentally confirmed by numerical simulation and by bench-top tests.
Tractors and Agricultural Machinery. 2009;76(8):33-37
pages 33-37 views

Construction of combustion chamber and fatigue durability of tractor diesel pistons

Glinkin S.A., Gots A.N., Ivanchenko A.B.

Abstract

An algorithm which can simulate cyclical stressedly-deformed state of pistons during a transient thermal load due to a tractor diesel engine operation, and evaluate their life time with an appropriate accuracy is presented. The estimation of influence of structural parameters of combustion of type of CNIDI (Central Scientific and Research Diesel Institute) chamber is conducted on the fatigue life of piston.
Tractors and Agricultural Machinery. 2009;76(8):38-41
pages 38-41 views

An analysis of working members strengthening methods

Krivochurov N.T., Ivanayskiy V.V., Zheltunov M.G., Shaykhudinov A.S.

Abstract

Influence of shock and abrasive impact on wear process of the parts strengthened by hardening, induction welding and an electric-spark method is investigated. It is proposed to estimate wear resistance of the method of hardening on relative wear resistance, provided that hardness of the abrasive mass influencing working organ is considerably below hardness of strengthened surfaces.
Tractors and Agricultural Machinery. 2009;76(8):41-43
pages 41-43 views

Metal-polymeric chain drive

Shevtsov S.N., Sayko I.B., Klimenko A.A., Zoriev I.A., Berberov S.A.

Abstract

The new constructions of chain and asterisk are developed with the use of polymeric elements. The offered structures are free of the chain-drives basic lacks, such as a necessity of greasing, noise effect and insufficient working life.
Tractors and Agricultural Machinery. 2009;76(8):43-44
pages 43-44 views

Diagnostics of diesels by the method of cylinder balance

Kokorev G.D., Nikolotov I.N., Uspenskiy I.A.

Abstract

Рассмотрены вопросы, касающиеся методов технического диагностирования дизелей; подробно раскрыт метод «цилиндрового баланса» применительно к дизелям, позволяющий упростить процесс диагностирования. Для реализации указанного метода предлагается защищенное патентом РФ устройство для отключения цилиндров с электроприводом. Отмечены преимущества использования устройства с целью повышения качества работы дизеля. Сделан вывод о возможности определения с помощью данного метода фактического технического состояния дизеля.
Tractors and Agricultural Machinery. 2009;76(8):45-46
pages 45-46 views

Аccounting residual stresses by improving technologies of parts recovering

Ignatyev A.G., Korotkov V.A., Ignatyev G.S.

Abstract

Показана эффективность применения способов управления остаточными напряжениями при восстановлении деталей наплавкой. Определены оптимальные режимы поверхностной пластической обработки наплавленного слоя обкаткой, обеспечивающие достижение наилучших показателей по усталостной прочности восстановленных деталей.
Tractors and Agricultural Machinery. 2009;76(8):47-49
pages 47-49 views

Synthesis of eccentric instrumental chucks of boring-and-milling machines for repair shops

Kuznetsov Y.N., Al-Dabas K., Manilo I.I.

Abstract

Eccentric tool tightening chucks (ETTC) for application in conditions of repair manufacture with reference to the boring-and-milling machine tool were developed. The efficiency of a method of the morphological analysis for synthesis ETTC was shown. In particular, it is shown that the system-morphological approach allows to synthesize new constructive circuits of ETTC at a level of inventions and useful models. The established analytical dependences of coefficients of chuck reinforcement by the tool clamping were adduced.
Tractors and Agricultural Machinery. 2009;76(8):50-51
pages 50-51 views

Perspective tools for figures of revolution combined broaching

Schedrin A.V., Ulyanov V.V., Bekaev A.A., Skoromnov V.M., Vanyushkina M.S., Abramova T.G., Khomyakova N.V., Chikhacheva N.Y.

Abstract

Предложен синтезированный с использованием алгоритмических процедур систем искусственного интеллекта конкурентоспособный инструмент для комбинированного протягивания тел вращения. Представлен вариант конструкции узла настройки абразивно-режущей и деформирующе-режуще-выглаживающей секций на необходимый размер детали и перспективная конструкция унифицированного корпуса комбинированной линейной протяжки.
Tractors and Agricultural Machinery. 2009;76(8):52-55
pages 52-55 views

Deere & Company declares the intention of widening its business in Russia

- -.

Abstract

В преддверии российско-американского бизнес-форума, состоявшегося в рамках визита в Москву президента США Барака Обамы, компания Dееrе & Соmраnу заявила о планах значительного увеличения своего с.-х., лесозаготовительного и строительного бизнеса на российском рынке. Сэмюэль Р. Аллен, президент и главный операционный директор Dееrе & Соmраnу, представил компанию на форуме, встретился с членами Правительства РФ и журналистами.
Tractors and Agricultural Machinery. 2009;76(8):49-
pages 49- views

Academy's coeval (to the 65th anniversary of Volgograd GSKhA)

Ovchinnikov A.S., Shaprov M.N.

Abstract

В 2009 г. Волгоградской ГСХА исполняется 65 лет. Ровесник вуза - факультет механизации сельского хозяйства - встречает этот юбилей новыми успехами и планами, продолжая обеспечивать с.-х. производство Волгоградской и Астраханской областей и Республики Калмыкия высококвалифицированными инженерными кадрами. Ученые Волгоградской ГСХА успешно решают задачи развития и создания эффективных технологий и прогрессивных технических средств.
Tractors and Agricultural Machinery. 2009;76(8):56-
pages 56- views


This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies