Generating and studying amplitude-frequency modulation signals using Rigol devices

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The article discusses the issues of practical use of amplitudefrequency modulation (AFM) signals, their generation and measurement of characteristics. An example of generating AFM signals using Rigol DSG3136B-IQ generator and studying their properties using Rigol MSO8204 oscilloscope and Rigol RSA5056-TG spectrum analyzer is given.

Full Text

Restricted Access

About the authors

N. Lemeshko

АО «Корпорация «Комета»

Author for correspondence.
Email: nlem83@mail.ru

начальник отдела

Russian Federation

M. Gorelkin

ООО «РШ Тех»

Email: mikhail.gorelkin@rsh-tech.ru

менеджер по продукту

Russian Federation

References

  1. Ширман Я.Д., Багдасарян С.Т., Маляренко А.С. и др. Радиоэлектронные системы. Основы построения и теория / Под ред. Ширмана Я.Д. М.: Радиотехника, 2007. 512 с.
  2. Баскаков С.И. Радиотехнические цепи и сигналы. М.: Высшая школа, 2003. 462 с.
  3. Гоноровский И.С. Радиотехнические цепи и сигналы. М.: Советское радио, 1971. 672 с.
  4. Румянцев К.Е. Радиоприемные устройства. М.: Академия, 2006. 336 с.
  5. Першин В.Т. Основы радиоэлектроники и схемотехники. Учебное пособие. Ч. 2. – Минск: Белорусский государственный университет информатики и радиоэлектроники, 2006. 152 с.
  6. Фомин А., Викторов Д. Метрология и радиоизмерения. Красноярск: Сибирский федеральный университет, 2016. 508 с.
  7. Справочник инженеров по радиомониторингу / Под ред. Слободнюка П.В. Киев, 2012. 720 с.
  8. Левшина Е.С., Новицкий П.В. Электрические измерения физических величин. Измерительные преобразователи. Л.: Энергоатомиздат, 1983. 320 с.

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Fig.1. FFT result for a signal with AFM with single-tone amplitude and frequency modulation, fA = 1 kHz and fCh = 4 kHz

Download (9KB)
3. Fig.2. FFT result for a signal with AFM with single-tone amplitude and frequency modulation, fA = 4 kHz and fCh = 1 kHz

Download (9KB)
4. Fig.3. FFT result for a signal with AFM with single-tone modulation in amplitude and frequency, fA = fЧ = 4 kHz

Download (9KB)
5. Fig.4. FFT result for a signal with AFM with single-tone modulation in amplitude and frequency, with fA = fCh = 4 kHz, m = M = 0.8

Download (9KB)
6. Fig.5. FFT result for the signal: a – with single-tone FM, fCh = 2 kHz, m = 5; b – with AFM at fA = 500 Hz; c – with AFM at fA = 2 kHz

Download (287KB)
7. Fig.6. FFT results obtained with frequency modulation by a smooth signal at Δf = 100 kHz: a – in the absence of AM superposition; b – when superimposing polyharmonic AM with a maximum frequency of 20 kHz

Download (290KB)
8. Fig.7. Block diagram of a signal detector with AFM

Download (22KB)
9. Fig.8. Block diagram of a modulator that generates a signal with amplitude-frequency modulation

Download (411KB)
10. Fig.9. Schematic diagram of a modulator that generates a signal with AFM

Download (229KB)
11. Fig. 10. Rigol DSG3136B-IQ AM generator settings tab

Download (19KB)
12. Fig. 11. Installation for studying signals with AFM in the time domain: a – diagram; b – photograph

Download (60KB)
13. Fig. 12. Installation for studying signals with AFM in the frequency domain: a – diagram; b – photograph

Download (51KB)
14. Fig. 13. Oscillogram of a signal with AFM in the persistence mode with a sweep duration of the order of one period

Download (388KB)
15. Fig. 14. Cursor measurements along the envelope to calculate the AM depth: a – for minimum; b – for maximum

Download (2MB)
16. Fig. 15. The result of statistical measurements for a signal with AFM

Download (397KB)
17. Fig. 16. Results of measurements of the occupied signal bandwidth with AFM

Download (355KB)
18. Fig. 17. Spectrogram of a signal with AFM at sinusoidal AM and FM

Download (366KB)

Copyright (c) 2024 Lemeshko N., Gorelkin M.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies