A device for dynamic monitoring of the main functional characteristics of self-propagating high-temperature synthesis occurring in multilayer thin-film structures

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

A device has been developed that allows for dynamic determination of the main functional characteristics of the self-propagating high-temperature synthesis occurring in multilayer thin-film structures. The article presents a block diagram and describes the device’s design.

Full Text

Restricted Access

About the authors

K. Volkov

Поволжский государственный технологический университет

Author for correspondence.
Email: kirill_volkov_101@bk.ru

аспирант

Russian Federation, Йошкар-Ола

References

  1. Белянин А. Ф., Налимов С. А., Борисов В. В., [и др.]. Влияние отжига на строение пленок ZnO, выращенных магнетронным распылением // Вакуумная наука и техника: Материалы XXV научно-технической конференции с участием зарубежных специалистов, Крым, Судак, 16–22 сентября 2018 года / Под ред. С. Б. Нестерова. М.: Новелла, 2018. С. 170–176.
  2. Шашин Д. Е. Разработка математической модели формирования тонких пленок оксида цинка с заданными значениями комплексной диэлектрической проницаемости // Вестник Поволжского государственного технологического университета. Серия: Радиотехнические и инфокоммуникационные системы. 2018. № 4(40). С. 74–81. doi: 10.15350/2306-2819.2018.4.74.
  3. Shashin D. E., Sushentsov N. I. Obtaining thin metal films and their compounds using magnetron sputtering and arc evaporation in a single technological cycle // Journal of Physics: Conference Series. 2021. Vol. 2059. No. 1. P. 012022. doi: 10.1088/1742-6596/2059/1/012022.
  4. Indium Corporation [Электронный ресурс]. URL: www.Indium.com. (дата обращения 04.05.2025).
  5. Волков К. А. Комплексный метод контроля основных функциональных характеристик реакции самораспространяющегося высокотемпературного синтеза при протекании в многослойных тонкопленочных структу- рах // Вестник Поволжского государственного технологического университета. Сер.: Радиотехнические и инфокоммуникационные системы. 2025. № 1 (65). С. 83–97. DOI: https://doi.org/10.25686/2306-2819.2025.1.83; EDN: ZRMHTA.
  6. L-7113P3C (L-53P3C). Datasheet – production data [Электронный ресурс]. URL: https://www.kingbright.com/attachments/file/psearch/000/00/00/L-7113P3C(Ver.18).pdf (дата обращения 08.05.2025).

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Fig. 1. Model of a device for implementing a comprehensive method for monitoring the main functional characteristics of the SHS reaction: 1 - contacts for supplying an activation pulse for the SHS reaction and for measuring the voltage drop across the sample, 2 - a capacitor charged to the minimum required activation energy, 3 - optical sensors, 4 - temperature sensors, 5 - channels for recording the reaction front, 6 - copper plates, 7 - foil sample, 8 - thermal insulation

Download (157KB)
3. Fig. 2. Structural diagram of the device for monitoring the main functional characteristics of the SHS reaction in multilayer thin films

Download (241KB)
4. Fig. 3. Device for dynamic control of the main functional characteristics of the SHS reaction (open view): 1 - body parts, 2 - contacts for supplying and removing the activation energy pulse, 3 - upper copper plate with a temperature sensor (not shown) for heat transfer from the sample, 4 - thermal insulation, 5 - electronic control board, 6 - connector for communication with a PC, 7 - power connector

Download (96KB)

Copyright (c) 2025 Volkov K.