检索

期
标题
作者
卷 7, 编号 2-2 (2013)
Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment
Radkevich M., Fomin D.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The expansion of technological capabilities and advantages of convex inserts pre-forming in a hot die forging process of forged plates
Kuhar' V., Nikolenko R., Suglobov R.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Effect of the number of tag billets on the final part temperature
Hamidulina A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Technology of upsetting process for parts with rectangular head and spherical radius
Glazunov D., Kalpin J., Molodov A., Filippov J.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Effect of thermomechanical processing schedule on microstructure and mechanical properties of ultra high strength steel forgings
Skubisz P., Sinczak J., Packo M., Mordalska K., Lisiecki L.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Determination of the minimum curvature radius of a die for isothermal direct axisymmetric extrusion of aluminum alloy AD35
Voronkov V.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Advancing the short workpieces without the formation of a defect clip
Aliev I., Kal'chenko P., Shvec A., Zhbankov J., Tagan L.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Development of technology of hardening of large punch matrices
Serezhkin M., Melnikov E.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Low - and non-waste technology of stamping ring forgings
Shibakov R.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Flexible technology of forged piston manufacturing in a small-scale production
Posedko V., Shibaev O.
PDF
(Rus)
卷 6, 编号 1 (2012)
DETERMINATION OF FRICTION COEFFICIENT BY COMPRESSION OF RING SAMPLE DURING HOT DEFORMATION
Petrov A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Thermal barrier coatings for precision stamping heat-resistant steels
Petrov A., Soljakov A.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part
Nikitenko V.
PDF
(Rus)
卷 6, 编号 1 (2012)
STUDY OF COLLOIDAL GRAPHITE THERMAL BARRIER COATINGS FOR HIGH-CARBON STEELS
Petrov A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping
Malikov S., Volodin I.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Selection of chrome-nickel steel hot forging mode for steam turbine blades
Balkova T.
PDF
(Rus)
卷 3, 编号 1 (2009)
Principles of Extruding Forging Die Design
Ragulin A., Anukhin A., Filippov Y., Kononov A.
卷 7, 编号 1-2 (2013)
Stress-strain state of plastically deformable body in relation to the processes of warm direct extrusion and reduction into conical extrusion dies
Pyzhov V., Shlykova A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Analysis of technological process of forging broaches with the simulation in DEFORM-3D
Taupek I., Alekseev P.
PDF
(Rus)
1 - 19 的 19 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##