Email this article METHOD OF 3D DIGITALIZATION OF TECHNICAL OBJECTS BASED ON ARTIFICIAL TEXTURES
- Authors: Rutkovskiy V.O.1, Rutkovskaya M.A.1, Rutkovskiy VO1, Rutkovskaya MA1
-
Affiliations:
- Issue: Vol 11, No 5 (2010)
- Pages: 249-254
- Section: Articles
- URL: https://journals.eco-vector.com/2712-8970/article/view/505133
- ID: 505133
Cite item
Full Text
Abstract
It is represented new method of passive refractive optical SD scanning which is based on preliminary preprocessing of measured objects by creation on its surfaces of artificial textures and post processing on a different level of details.
About the authors
Valeriy Olegovich Rutkovskiy
Email: ibiplane@mail.ru <mailto:ibiplane@mail.ru>
Marina Aleksandrovna Rutkovskaya
Email: marina_a_b@mail.ru <mailto:marina_a_b@mail.ru>
V O Rutkovskiy
M A Rutkovskaya
References
- A low cost 3D scanner based on structured light / C. Rocchini, P. Cignoni, C. Montani et al. // Eurographics. 2001. Vol. 20. № 3. Р. 1-10
- Teutsch C. Model-based Analysis and Evaluation of Point Sets from Optical 3D Laser Scanners : PhD Thesis // Magdeburger Schriften zur Visualisierung. Vol. 1. Shaker Verlag, 2007.
- Control of structural problems in cultural heritage monuments using close-range photogrammetry and computer methods / P. Arias, J. Herraez, H. Lorenzo et al. // Computers and Structures. 2005. № 83. Р. 1754-1766.
- Zhizhuo W. Principles of photogrammetry. Beijing, China : Publishing House of Surveying and Mapping, 1990.
- Furukawa Y., Ponce J. Accurate, Dense, and Robust Multi-View Stereopsis // IEEE Trans. on Pattern Analysis and Machine Intelligence. 2009. Vol. 32. № 8. P. 1362-1376.
- Wilson R. G. Tsai camera calibration software [Electronic resourse] // URL: <http://www.cs.cmu.edu/>~rgw/TsaiCode.html (date of visit: 12.12.2010).
Supplementary files
