Enviar artigo por via de e-mail The method of the automation of the plasmotron movement by six-axis robotic manipulator
- Autores: Kalashnikov A.S.1, Rudenko M.S.1, Kucherenko A.D.1, Mikheev A.Y.1, Girn A.V.1
-
Afiliações:
- Reshetnev Siberian State University of Science and Technology
- Edição: Volume 22, Nº 4 (2021)
- Páginas: 700-707
- Seção: Section 3. Technological Processes and Materials
- URL: https://journals.eco-vector.com/2712-8970/article/view/562951
- DOI: https://doi.org/10.31772/2712-8970-2021-22-4-700-707
- ID: 562951
Citar
Resumo
The article presents a method for automating the creation of trajectories of the plasmatron motion by a six-axis robotic manipulator. The automation system was created on the basis of an industrial robot from KUKA. The automation of the creation of trajectories of the plasmatron over the surface of the part is implemented as follows: the trajectory of the plasmatron is created in a graphic editor in the .dwg format. The created file is loaded into the CAM program for CNC machines. A CAM program converts a vector or an area specified by vectors into a control command in g-code format, which is then converted to KRL by a program written in the Python programming language. The development of the program consisted of two stages: the creation of rectilinear movements and the creation of curvilinear movements. The result of the method is presented.
Palavras-chave
Sobre autores
Alexey Kalashnikov
Reshetnev Siberian State University of Science and Technology
Autor responsável pela correspondência
Email: fangy.ko@gmail.com
fifth-year student
Rússia, 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037Mikhail Rudenko
Reshetnev Siberian State University of Science and Technology
Email: mister.m.rudenko@gmail.com
Assistant
Rússia, 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037Anton Kucherenko
Reshetnev Siberian State University of Science and Technology
Email: dartantonton@yandex.ru
fifth-year student
Rússia, 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037Anatoly Mikheev
Reshetnev Siberian State University of Science and Technology
Email: michla@mail.ru
Dr. Sc., Professor
Rússia, 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037Alexey Girn
Reshetnev Siberian State University of Science and Technology
Email: girn007@gmail.com
Cand. Sc., Associate Professor
Rússia, 31, Krasnoyarskii rabochii prospekt, Krasnoyarsk, 660037Bibliografia
- Khasuy A. Tekhnika napyleniya [Spraying technique]. Moscow, Mashinostroenie Publ., 1975, 288 p.
- Kudinov V. V. Plazmennye pokrytiya [In Plasma coatings]. Moscow, Nauka Publ., 1977, 270 p.
- Mikheev A. E., Kolmykov V. A. [Improving the performance characteristics of the surfaces of structural elements of aircraft.]. Avtomatizatsiya protsessov obrabotki. Moscow, MAKS Press Publ., 2002, 224 p.
- Zuev D. M., Shakhmatov A. V., Khanov V. Kh. [The concept of reconfigurable space lab on the example of the spacecraft ReshUCube]. Kosmicheskie sistemy. Moscow, Pero Publ., 2021, P. 17–18.
- Aysha S. Hameed, Bindu G. R-Single segment approach and landing guidance and control for an unpowered reusable launch vehicle. Aerospace Science and Technology. 2021, No. 115, P. 106777. Doi: https://doi.org/10.1016/j.ast.2021.106777.
- Anan’ev A. I., Borshchev Yu. P., Kvardakov M. Yu. et al. [The formation of geometricallycomplex parts of space vehicles by means of selective laser melting]. Vestnik NPO im. S.A. Lavochkina. 2017, No. 1(35), P. 87–92 (In Russ.).
- Ethan P. Hopping, Wensheng Huang, Kunning G. Xu. Small Hall Effect Thruster with 3D Printed Discharge Channel: Design and Thrust Measurements. Aerospace. 2021, Vol. 8, P. 227. Doi: https://doi.org/10.3390/aerospace8080227.
- Lawand Lydia, Massimo Panarotto, Petter Andersson, Ola Isaksson, Michael Kokkolaras. Dynamic Lifecycle Cost Modeling for Adaptable Design Optimization of Additively Remanufactured Aeroengine Components. Aerospace. 2020, No. 8, P. 110. Doi: https://doi.org/10.3390/aerospace 7080110.
- Mikheev A. E., Girn A. V., Ravodina D. V., Yakubovich I. O. [Plasmatron for coating of refractory dispersed materials]. Siberian Journal of Science and Technology. 2018, Vol. 19, No. 2, P. 365–372 (In Russ.). doi: 10.31772/2587-6066-2018-19-2-365-372.
- Mikheev A. E., Girn A. V., Yakubovich I. O., Rudenko M. S. [Spraying of coatings with a plasma torch with powder feeding in a satellite plasma]. Siberian Aerospace Journal. 2021, Vol. 22, No. 1, P. 194–200 (In Russ.). doi: 10.31772/2712-8970-2021-22-1-194-200.
- Kompaniya KUKA Roboter [KUKA Roboter Company]. Available at: https://www.kuka.com (accessed 28.11.2021).
- Proizvoditel’ promyshlennykh robotov Doosan Robots [Manufacturer of industrial robots Doosan Robots]. Available at: https://doosanrobots.ru (accessed: 28.11.2021).
- Promyshlennye roboty ABB [BB Industrial robots]. Available at: https://new.abb.com/products/ robotics/ru/ (accessed: 28.11.2021).
- Mikheev A. E., Girn A. V., Yakubovich I. O., Rudenko M. S. [Plasmatron for coating the inner surfaces of products]. Siberian Journal of Science and Technology. 2020, Vol. 21, No. 2, P. 274–278 (In Russ.). doi: 10.31772/2587-6066-2020-21-2-274-278.
- re – Regular expression operations. Available at: https://docs.python.org/3/library/re.html (accessed: 28.11.2021).
Arquivos suplementares
