Features of Additive Laser Processing for the Surface Layer Hardness Increase on Titanium Samples
- Authors: Egorova X.A.1, Rozanov K.A.1, Kiian A.I.2, Sinev D.A.1
-
Affiliations:
- ITMO University
- INSCIENCE
- Issue: Vol 17, No 1 (2023)
- Pages: 16-24
- Section: Additive Technologies
- URL: https://journals.eco-vector.com/1993-7296/article/view/626549
- DOI: https://doi.org/10.22184/1993-7296.FRos.2023.17.1.16.24
- ID: 626549
Cite item
Abstract
This article presents the research results on the control of the mechanical and functional titanium parameters by an additive surface laser micro-treatment with an additional graphite layer under the influence of near-IR laser radiation. The results of experimental studies on selection of the optimal laser radiation parameters for increasing the hardness and wear resistance of a model titanium sample are provided. The results demonstrate significantly increased hardness of the treated area (up to 9.3 times) and a decreased abrasive wear resistance rate by about 2 times compared to the original sample.
Full Text
About the authors
X. A. Egorova
ITMO University
Author for correspondence.
Email: photonics@technosphera.ru
ORCID iD: 0000-0002-4228-0392
PhD Student, Research Engineer, Institute of Laser Technologies
Russian Federation, Saint PetersburgK. A. Rozanov
ITMO University
Email: photonics@technosphera.ru
Student, Institute of Laser Technologies
Russian Federation, Saint PetersburgA. I. Kiian
INSCIENCE
Email: photonics@technosphera.ru
Engineer
Russian Federation, Saint PetersburgD. A. Sinev
ITMO University
Email: photonics@technosphera.ru
Candidate of Technical Sciences, Assistant, Institute of Laser Technologies
Russian Federation, Saint PetersburgReferences
- Knunyants I. L., Zefirov N. S. Chemical Encyclopedia: in 5 volumes / Editorial Board.: Zefirov N. S. (chief editor) and others – M.: Great Russian Encyclopedia. 1995; 4:641.(In Russ.). Кнунянц И. Л., Зефиров Н. С. Химическая энциклопедия: в 5 т. /Редкол.: Зефиров Н. С. (гл. ред.) и др. – М.: Большая Российская энциклопедия. 1995; 4:641.
- Kazachenok M. S., Panin A. V., Ivanov Yu. F., Pochivalov Yu. I., Valiev R. Z. The effect of thermal annealing on the mechanical behavior of technical titanium VT1-0, having a submicrocrystalline structure in the surface layer or in the volume of the material. Physical mesomechanics. 2005; 8(4): 37–47. doi: 10.24411/1683-805X-2005-00024. (In Russ.). Казаченок М. С., Панин А. В., Иванов Ю. Ф., Почивалов Ю. И., Валиев Р. З. Влияние термического отжига на механическое поведение технического титана ВТ1-0, имеющего субмикрокристаллическую структуру в поверхностном слое или в объеме материала. Физическая мезомеханика. 2005; 8(4): 37–47.
- Grum J. Comparison of different techniques of laser surface hardening / Grum J // Journal of Achievements in Materials and Manufacturing Engineering. 2007; Vol. 24:17–25.
- Ali Khorram, Akbar Davoodi Jamaloei. Nd : YAG laser surface hardening of AISI 431 stainless steel; mechanical and metallurgical investigation. Optics and Laser Technology. 2019; 119: 105617. doi: 10.1016/J.OPTLASTEC.2019.105617
- Mahmoud Moradi, Hossein Arabi. Enhancement of surface hardness and metallurgical properties of AISI 410 by laser hardening process; diode and Nd : YAG lasers. Optik. 2019; 188:277–286. doi: 10.1016/j.ijleo.2019.05.057
- N. Zarrinfar, P. H. Shipway, A. R. Kennedy, A. Saidi. Carbide stoichiometry in TiC and Cu-TiCx produced by self-propagating high-temperature synthesis. Scripta Materialla. 2002; 46:121–126. doi: 10.1016/S1359-6462(01)01205-2
- Kiparisov S. S., Levinsky Yu.V., Petrov A. P. Titanium carbide: preparation, properties, application. – M.: Metallurgy, 1987, 216 p. (In Russ.). Кипарисов С. С., Левинский Ю. В., Петров А. П. Карбид титана: получение, свойства, применение. – М.: Металлургия, 1987, 216 с.
- Maharjan N, Zhou W, Wu N. Direct laser hardening of AISI 1020 steel under controlled gas atmosphere. Surface and Coatings Technology. 2020;15:125399. doi: 10.1016/j.surfcoat.2020.125399.
- Nair A. M., Muvvala G., Nath A. K. A study on in-situ synthesis of TiCN metal matrix composite coating on Ti-6Al-4V by laser surface alloying process. Journal of Alloys and Compounds. 2019; 810:151901. doi: 10.1016/j.jallcom.2019.151901
- Shi J, Wang Y. Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review. Journal of Materials Science. 2020; 55(23):9883–917. doi: 10.1007/s10853-020-04730-3.
- Veiko V. P., Andreeva Y., Van Cuong L., Lutoshina D., Polyakov D., Sinev D., Mikhailovskii V., Kolobov Y. R., Odintsova G. Laser paintbrush as a tool for modern art. Optica. 2021 May 20;8(5):577–85. doi: 10.1364/OPTICA.420074.
- Veiko V., Luong V., Odintsovo G., Romanov V., Yatsuk R. Optimization of the technology of color laser marking of metals for industrial applications. In the VII International Conference on Photonics and Information Optics: Collection of scientific papers. Moscow: NRU MEPhI 2018 (p. 468). (In Russ.). Вейко В., Лыонг В., Одинцова Г., Романов В., Яцук Р. Оптимизация технологии цветной лазерной маркировки металлов для промышленного применения. In VII международная конференция по фотонике и информационной оптике: Сборник научных трудов. М.: НИЯУ МИФИ 2018 (p. 468). doi: 10.22184/1993-7296.2018.12.6.568.575
- Veiko V. P., Volkov S. A., Zakoldaev R. A., Sergeev M., Samokhvalov A., Kostyuk G. K., Milyaevka. Laser-induced microplasma as a tool for microstructuring transparent media. Quantum electronics. 2017;47(9):842–8. (In Russ.). Вейко В. П., Волков С. А., Заколдаев Р. А., Сергеев М. М., Самохвалов А. А., Костюк Г. К., Миляев К. А. Лазерно-индуцированная микроплазма как инструмент микроструктурирования прозрачных сред. Квантовая электроника. 2017;47(9):842–8.
- Polyushkin N. G. Fundamentals of the theory of friction, wear and lubrication: textbook. Stipend. – Krasnoyarsk: KSAU. 2013; 192:4. (In Russ.). Полюшкин Н. Г. Основы теории трения, износа и смазки. – Красноярск: КГАУ. 2013; 192:4.