检索

期
标题
作者
卷 3, 编号 1 (2009)
Vibration of the Cross-section of a Nonrigid Hollow Cylinder Unit under Combined Treatment by Cutting and Surface Plastic Deformation
Maximov Y., Ankin A., Vetrova E.
卷 6, 编号 2-2 (2012)
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation
Vetrova E.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Tangential compensation of torsional vibrations of a workpiece in the technological system of combined cutting-deforming machining
Ankin A., Chebyshev A.
PDF
(Rus)
卷 1, 编号 2 (2007)
The dependence of cutting force on the sectional shape vibrations under mixed machining of nonrigid tubes
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Tangential oscillations with combination of cutting and surface plastic deformation of flexible shafts
Ankin A.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Optimization of combined cutting and surface plastic deformation
Pini B., Vetrova E., Maximov Y.
PDF
(Rus)
卷 1, 编号 2 (2007)
Effectiveness increase of burnishing and mixed processing by the variation of tool location method
Kouznetsov V., Shestavin P.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 3, 编号 2 (2009)
Dependence of cutting depth on sectional shape error during combined treatment of non-rigid parts of quill cylinder type
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 8, 编号 4-2 (2014)
Counting approaches to determination of force function argument
Maximov Y., Ankin A., Chebyshev A.
PDF
(Rus)
卷 4, 编号 1 (2010)
Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 5, 编号 1 (2011)
Development of the combined treatment technology of non-ground non-ferrous metals based on implementation of no-wear effect
Zinin M., Sergeev E., Gavrilov S., Shchedrin A.
PDF
(Rus)
卷 3, 编号 2 (2009)
Оscillations under cutting-deforming flexible shafts work
Maximov Y., Ankin A.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder
Vetrova E., Lebedev P., Adeyev A.
PDF
(Rus)
卷 5, 编号 2 (2011)
Analysis of Formation of Machining Error in the Technological System of Combined Machining and Surface Plastic Deformation of Non-rigid Parts of the Hollow Cylinder Type
Vetrova E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Increase of productivity of processing the pneumo - and hydraulic cylinders by enhancement of the device for combined machining and surface plastic deformation
Pini B., Maximov Y., Ankin A., Adeev A.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Simulation of tangential vibrations of combined cutting-deforming machining of non-rigid shafts
Ankin A., Chebyshev A.
PDF
(Rus)
1 - 18 的 18 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##