检索

期
标题
作者
卷 4, 编号 1 (2010)
Robotization of Screwing of Fastening and Thread Parts
Berezin S., Okhrimenko M.
PDF
(Rus)
卷 2, 编号 2 (2008)
The Structure and Interconnections of Part Precision Factors and Couplings and the Ways to Reduce Errors at Internal Combustion Engine Production
Sanaev N.
PDF
(Rus)
卷 5, 编号 2 (2011)
Influence of Residual Stresses on Product Quality on Cold Forming of Sheet Workpieces
Kolikov A., Lyutsau A., Lisunets N., Gladkov V., Shpunkin N.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder
Vetrova E., Lebedev P., Adeyev A.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Development of a souvenir bell with use of modeling
Filippov Y., Krutina E., Filippov K.
PDF
(Rus)
卷 2, 编号 2 (2008)
Control of Machinery Quality Parameter Inheritance during restoration, working, assembly and operation of machinery
Heyfets M., Lysov A., Kusakin N., Prement G.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Remedy defects in the production of thin sheet profile at multi-roll forming bands
Kolesov A., Kiselev D.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Durability of engineering products
Zinchenko V., Manevskiy S., Prokhorova A.
PDF
(Rus)
卷 2, 编号 2 (2008)
Passive-active Relative Orientation in Automatic Assembly
Peyeva I., Vitliemov V.
PDF
(Rus)
卷 2, 编号 2 (2008)
The Automobile Suspension Static Strength and Durability Analysis at the Design Stage
Lata V., Markov S., Eremenko A., Elkhovikova A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The process of obtaining a roll-formed sections with a predetermined longitudinal curvature through control the characteristics of plastic hinge in the deformation zone
Markovcev V., Markovceva V.
PDF
(Rus)
卷 2, 编号 2 (2008)
Optimization of individual selection for multiselection dimensional chains
Nepomiluyev V., Mayorova E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Calculation and optimization of the welded frame for unique machine-tools
Maksimov Y., Porkhunov S., Kuzminskiy D.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Designing of technological containers for storage and transportation of body parts of passenger cars
Avdeyev V., Kuzminskiy D., Fomichev A.
PDF
(Rus)
卷 6, 编号 1 (2012)
AUTOMATION OF SYSTEMS OF SPARE PARTS AND EQUIPMENT SUPPLY MANAGEMENT FOR AN ALL-WHEEL DRIVE VEHICLE ON THE CHASSIS OF URAL-6320
Galkin K.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Technique of definition the complexity of castings by design and technological parameters of a cast part
Volkomovich A., Sorokin Y.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Optimization of combined cutting and surface plastic deformation
Pini B., Vetrova E., Maximov Y.
PDF
(Rus)
卷 4, 编号 1 (2010)
Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation
Vetrova E.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 4, 编号 1 (2010)
On the Issue of Particularities of Design and Simulation of Welded Constructions of Machine's Basic Parts
Mihaylov V., Porhynov S.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 8, 编号 4-5 (2014)
Prospects of development of service centers in the Republic of Angola
Dia M.
PDF
(Rus)
卷 1, 编号 2 (2007)
Inventory Management of Spare Parts and Accessories Using Information Technologies
Antipenko V., Galkin K., Sharipova E., Bezrukov A.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Designing innovative local water evaporative air cooler for tractor cabins
Mikhailov V., Sharipova N., Klimova E.
PDF
(Rus)
卷 8, 编号 3-5 (2014)
Hope of domestic automotive industry or who is the boss?
Zvekova E., Kravets E.
PDF
(Rus)
1 - 26 的 26 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##