Vol 81, No 2 (2014)
- Year: 2014
- Articles: 15
- URL: https://journals.eco-vector.com/0321-4443/issue/view/3629
Articles
Innovative local water evaporating air cooler intended for tractor cabs
Abstract
Design of innovative water evaporating air cooler intended for normalization of tractor-driver’s thermal condition by means of local airflow supply is proposed. The apparatus can be used both on new tractor models and on models under service, where air coolers are absent.
Tractors and Agricultural Machinery. 2014;81(2):3-6
3-6
Utilitarian cargo and passenger light vehicle for rural residents
Abstract
For development of transport infrastructure of rural territories, it seems necessary to develop a utilitarian all-terrain passenger and commercial light vehicle named conventionally “Vozhak”. Variant of its creative look is proposed, some specifications are given.
Tractors and Agricultural Machinery. 2014;81(2):7-11
7-11
11-13
14-17
17-21
Evaluation of the impact of wheel tractor velocity and other factors on its oscillations
Abstract
Vertical oscillations of tractor Т-150К during operation on sandy soddy-podzolic soil prepared to sowing were investigated. As result of calculations carried out using experimental data on viscoelastic soil properties, the influence of a tractor velocity on appearance of mutually independent oscillations of its axes was shown.
Tractors and Agricultural Machinery. 2014;81(2):21-25
21-25
Slipping work of speed synchronizer taking into account the influence of drive torque from declutched frictional clutches in a gear box
Abstract
Gear shift process by using a speed synchronizer in car and tractor gear boxes has been considered. The calculation method of slipping work and synchronization time for loading conditions of speed synchronizer, taking into account active drive torque from declutched frictional clutch, are proposed.
Tractors and Agricultural Machinery. 2014;81(2):25-29
25-29
Minimizing the disturbance of soil aggregate structure during cultivation
Abstract
The method of minimizing of working organs specific action on soil structure was proposed. Its advantages are visibility, possibility to include practically all constructive parameters of tillage tools into optimization model, direct target function control.
Tractors and Agricultural Machinery. 2014;81(2):29-33
29-33
Improvement of a stubble ploughshare
Abstract
The task of perfection is to diminish load on the tractor and decrease cultivation blade wear, which will result in cost reduction of operation and repair of the aggregate. The technical result shows that share tractive resistance is diminished due to change in design.
Tractors and Agricultural Machinery. 2014;81(2):34-35
34-35
Wear investigations of working parts of machines and technological equipment
Abstract
Wear pattern on the working surfaces of concrete mixer blades can be explained mainly by change of mix pressure on different points of working edge. The rotating blade angled to the rotation plane moves the mix both to direction of moving and along the concrete mixer axe. When high abrasive mixes of different fraction composition are prepared, wear of the working surfaces on thickness results in deflection, deformation and destruction of the blade.
Tractors and Agricultural Machinery. 2014;81(2):36-38
36-38
Theoretical background for the optimization of combined fuel purification in fuel systems of mobile machines
Abstract
Theoretical bases of engineering of two-stage fuel cleaning system in diesel machines fuel system are considered in two variants, namely combination of depth filtering elements and combination of depth and paper filtering elements.
Tractors and Agricultural Machinery. 2014;81(2):38-40
38-40
Organization of technical support systems in animal husbandry
Abstract
Actual systems of maintenance and repair in animal husbandry were analyzed, their advantages and disadvantages were revealed. Problems of perfection of economic relations between machinery manufacturers, commodity producers and technical service organizations are considered.
Tractors and Agricultural Machinery. 2014;81(2):41-43
41-43
43-44
Results of the exhibition Agritechnica-2013
Abstract
В Ганновере (Германия) с 10 по 16 ноября 2013 г. проводилась крупнейшая международная выставка сельхозтехники Agritechnica-2013. Организатор выставки, Немецкое сельскохозяйственное общество DLG, отмечает успех посещаемости: в 2013 г. в выставке приняло участие около 2900 экспонентов, в том числе рекордное количество иностранных – более 1500 из 47 стран. Численность участников на 7% превысила показатель предыдущей выставки (также почти на 11%, до 42 га, увеличилась выставочная площадь). Данный результат подчеркивает огромный интерес со стороны сельхозпроизводителей, подрядных предприятий и организаций по продаже сельхозтехники.
Tractors and Agricultural Machinery. 2014;81(2):45-47
45-47
Commemorating the 110th anniversary of academician V.N. Boltinskiy
Abstract
The conceptual issues of V.N. Boltinskiy scientific heritage are stated, his contribution to progress of tractor industry and agricultural mechanization as well as his advances in training of engineering skills for agriculture are highlighted.
Tractors and Agricultural Machinery. 2014;81(2):48-52
48-52