Vol 82, No 11 (2015)

Articles

Improvement of environmental performance of diesel engine operating on water-biofuel emulsion

Markov V.A., Devyanin S.N., Nagornov S.A., Levina Y.Y.

Abstract

Opportunities to reduce the emissions of toxic components with exhaust gases are evaluated, based on experimental tests of diesel engine operating on water-biofuel emulsion and diesel fuel.
Tractors and Agricultural Machinery. 2015;82(11):3-6
pages 3-6 views

Test bench for full-scale specimens of sintered polymer friction disks and metallic counterbodies

Saroka D.I., Rogovoy A.N., Leshok A.V.

Abstract

Test bench for friction disks has been developed. It allows to investigate tribotechnical properties of material of full-scale specimens and to estimate the effect of friction material components on tribotechnical properties.
Tractors and Agricultural Machinery. 2015;82(11):7-9
pages 7-9 views

Recuperative hydraulic booster of steering control of wheeled vehicle

Chmil V.P.

Abstract

The paper deals with the scheme of pump and battery supply of hydraulic mechanism of steering control of a wheeled vehicle with integrated unit of heat recuperation. The scheme allows to increase the pump life and the safety of vehicle control, including the cases of pump and engine failure and slow-speed maneuvering. In addition, the fuel consumption of steering pump drive is reduced, with the result that the fuel consumption of engine decreases.
Tractors and Agricultural Machinery. 2015;82(11):9-11
pages 9-11 views

Energy-saving A-hoe blade for tillage

Rudenko N.Y., Gorbachev S.P., Kalugin D.S., Kayvanov S.D.

Abstract

Innovative energy-saving A-hoe blade with stepped variable share has been developed. It allows to reduce energy consumption for operation of combined tillage machines.
Tractors and Agricultural Machinery. 2015;82(11):11-13
pages 11-13 views

Optimal energy saturation of agricultural tractor

Samsonov V.A., Lachuga Y.F.

Abstract

Convex functions of specific energy consumption of agricultural tractor are determined. Its optimum energy saturation corresponds to their minimum.
Tractors and Agricultural Machinery. 2015;82(11):13-16
pages 13-16 views

Optimization of energy parameters of tractor gas-turbine engine

Shkrabak V.S., Dzhabborov N.I., Shkrabak R.V., Fedkin D.S.

Abstract

The article presents the results of studies on optimization of main energy parameters of tractor gas-turbine engines for machine-tractor units.
Tractors and Agricultural Machinery. 2015;82(11):17-20
pages 17-20 views

Study of possibility for forcing of diesel engines produced by Vladimir motor-tractor plant

Gavrilov A.A., Gots A.N.

Abstract

The article presents the results of calculation researches of possibility for forcing of diesel engines produced by Vladimir motor-tractor plant to 22,1 (30); 25,7 (35) and 29,4 (40) kilowatt per liter (horsepower per liter). It substantiates the most appropriate indicators of diesel engine for the task.
Tractors and Agricultural Machinery. 2015;82(11):20-23
pages 20-23 views

Analysis and statement of problem of cylinder oil supply in four-stroke piston engine

Putintsev S.V.

Abstract

The paper deals with the problem of lube oil supply to the parts of cylinder-piston unit of four-stroke internal combustion engine. The results pointing out an abnormal (non-uniform) character of motor oil distribution on cylinder wall sides taking the lateral force of piston are presented. The paper in general terms formulates the problem, the solving of which will allow to get a more adequate idea of cylinder oil supply and offer on this basis the technical solutions for improvement of this process.
Tractors and Agricultural Machinery. 2015;82(11):24-27
pages 24-27 views

Static stability of articulated front loader on the slope

Pozin B.M., Troyanovskaya I.P., Bondar V.N., Vershinskiy L.V., Taborskikh Y.V.

Abstract

The article deals with the static stability for overturning of articulated front loader, depending on its location on the slope.
Tractors and Agricultural Machinery. 2015;82(11):27-29
pages 27-29 views

System analysis of process of high-temperature thermomechanical treatment for blanks of hollow track pins

Dementyev V.B., Zasypkin A.D.

Abstract

The process of high-temperature thermomechanical treatment with deformation by screw compression for hollow products has been developed. It is considered as a technical system that represents the set of functional relations between the elements such as: the modes of high-temperature thermomechanical treatment with deformation by screw compression, the geometry fidelity, the quality of working surfaces, the mechanical properties of the material, the operational life of part. Thus a connection is made between elementary x-qualities and performance properties.
Tractors and Agricultural Machinery. 2015;82(11):30-34
pages 30-34 views

Quality and reliability of domestic machinery as the basis of its competitiveness

Kushnarev L.I., Chepurina Y.L., Chepurin A.V., Kushnarev S.L.

Abstract

The paper presents the results of analysis of agricultural equipment condition and some indicators of agricultural equipment use in enterprises of agroindustrial complex. Directions of efficiency improvement of agricultural production are determined.
Tractors and Agricultural Machinery. 2015;82(11):35-37
pages 35-37 views

Synthesis of control model of operating reliability of combine harvesters

Tsarev Y.A., Simon D.V.

Abstract

The paper deals with the questions related to the improving of operating reliability of combine harvesters by means of synthesis of formerly used methods with the range of modern structural transformations in technical service, namely the three-level system of repair parts supply, the module principle of technical service and repair, the АВС (or XYZ) classification.
Tractors and Agricultural Machinery. 2015;82(11):38-40
pages 38-40 views

Influence of position of A-hoe blades of sowing machines on their wear

Solovyev S.A., Kozarez I.V., Feskov S.A.

Abstract

It is shown that owing to unevenness of wear of hoe blades located in different places of a frame, as well as to low relative service life and to inability to meet agrotechnical standards, the renewal of operational capability of the unit demands the complete replacement of hoe blades.
Tractors and Agricultural Machinery. 2015;82(11):40-42
pages 40-42 views

Rotary thrashing and separating devices

Belov M.I., Shreyder Y.M.

Abstract

The article provides a brief overview of rotary threshing and separating devices of self-propelled combine harvesters. Geometric parameters of the rotors and trends of their development are given.
Tractors and Agricultural Machinery. 2015;82(11):43-50
pages 43-50 views

Analysis of structure of machine and tractor fleet in the Republic of Kazakhstan and development prospects of agricultural machinery industry

Golikov V.A., Usmanov A.S., Rzaliyev A.S.

Abstract

Structure of machine and tractor fleet in the Republic of Kazakhstan is analyzed. It is noted that tractors and combine harvesters, sowing machines and other machinery are presented by many brands, which complicates their service maintenance. Development prospects of agricultural machinery industry are shown.
Tractors and Agricultural Machinery. 2015;82(11):50-52
pages 50-52 views


This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies