检索

期
标题
作者
卷 16, 编号 1 (2022)
Forecasting the magnitude of the electrical load in electrical complexes of aircraft
Chernov A., Maleev R., Eroshkin D., Fedorenko E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Status and opportunities for development of some gear cutting technologies and equipment
Shvychkov D.
PDF
(Rus)
卷 6, 编号 1 (2012)
DEPENDANCE OF GRINDING ACCURACY FROM PARAMETERS OF SET-UP
Koltunov I., Lobanov A.
PDF
(Rus)
卷 4, 编号 2 (2010)
Comparative estimation of influece of factors on accuracy of the hight sizes of forging received on screw and crank presses
Vyatkin A., Matveev S.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Precision of machining on CNC machines
Maksimov Y., Bekayev A., Nadolskiy M., Prokhorov A.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Development of flow forming cutting of cylindrical wheels
Kalashnikov A., Morgunov Y., Kalashnikov P., Kotkina T.
PDF
(Rus)
卷 3, 编号 1 (2009)
The Computerized Means for the Automation of Qualifying Operations Based on Labview Technology
Sirotsky A., Murachev E., Dorokhov I.
卷 4, 编号 1 (2010)
Influence of Occilations in Sectional Shape of Non-rigid Parts Quill Cylinder Type on the Cutting Force in the Process of Combined Machining and Surface Plastic Deformation
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Modern technologies tendencies in development of flow-skiving
Kalashnikov A., Morgunov J., Kalashnikov P.
PDF
(Rus)
卷 4, 编号 1-4 (2014)
Scaling when using weighted regression method
Ivashnev L., Gorbacheva S.
PDF
(Rus)
卷 3, 编号 1 (2009)
Statistical Analysis of Accuracy for Electrochemical Working of a Compressor Blade
Morgunov Y., Benikov V., Saushkin S., Saushkin G.
卷 2, 编号 2 (2008)
Simulation of Tooling System Rigidity for Estimation Their Influence on Working Accuracy
Pini B., Zinovyev D.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The calculation of volumetric accuracy
Maksimov J., Krylov O., Kuz'minskij D.
PDF
(Rus)
卷 10, 编号 3 (2016)
Application of microelectromechanical sensors in the integrated navigation system of ground transport and agricultural technological vehicle
Novikov P., Gerdi V., Novikov V.
PDF
(Rus)
卷 3, 编号 1 (2009)
Vibration of the Cross-section of a Nonrigid Hollow Cylinder Unit under Combined Treatment by Cutting and Surface Plastic Deformation
Maximov Y., Ankin A., Vetrova E.
卷 4, 编号 1 (2010)
Robotization of Screwing of Fastening and Thread Parts
Berezin S., Okhrimenko M.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder
Vetrova E., Lebedev P., Adeyev A.
PDF
(Rus)
卷 6, 编号 1 (2012)
INFLUENCE OF THE METHOD OF TOOTH FORMING AND FORMS OF TOLERANCE FOR FINISHING ON THE ACCURACY OF MACHINED GEARS
Vinogradov V., Shvychkov D.
PDF
(Rus)
卷 2, 编号 2 (2008)
The Structure and Interconnections of Part Precision Factors and Couplings and the Ways to Reduce Errors at Internal Combustion Engine Production
Sanaev N.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Parametric optimization of gear cutting operations
Vinogradov V., Cherepakhin A.
PDF
(Rus)
卷 5, 编号 2 (2011)
Analysis of Formation of Machining Error in the Technological System of Combined Machining and Surface Plastic Deformation of Non-rigid Parts of the Hollow Cylinder Type
Vetrova E.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Adaptive optimization of bevel gear repair assembly of automobile transmissions
Vinogradov V., Cherepakhin A.
PDF
(Rus)
卷 5, 编号 2 (2011)
Development of Software for Calculation of a Spatial Dimension Chain
Ankin A., Kuzminsky D.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Criteria of processing operations optimization of gear-producing based on various methods of tooth formation
Vinogradov V., Cherepahin A.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
The dependence of the accuracy of cylindrical toothed gears manufacturing from the precision of their major components and assemblies
Vinogradov V., Cherepakhin A.
PDF
(Rus)
卷 3, 编号 2 (2009)
Dependence of cutting depth on sectional shape error during combined treatment of non-rigid parts of quill cylinder type
Maximov Y., Ankin A., Vetrova E.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Estimation of CNC machine error influence on precision of machining of surfaces of the body of tool holder for replaceable inserts
Nadolskiy M.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Optimization of combined cutting and surface plastic deformation
Pini B., Vetrova E., Maximov Y.
PDF
(Rus)
1 - 28 的 28 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##