Vol 21, No 3 (2013)
- Year: 2013
- Articles: 34
- URL: https://journals.eco-vector.com/1991-8542/issue/view/1181
Articles
The development of intellectual network-centric system (smart grid) of adaptive resource allocation in integrated networks of gas, heat and electricity
Abstract
The current trends of the Smart Grid concept are described .The creation of an intellectual customer-centric system of gas, heat and electricity supply is described as a solution to the corresponding problems the creation of the intellectual customer-centric system of gas, heat and electricity supply is proposed. As a prototype of such a simulation modeling and the adaptive resource allocation in integrated networks of resource supply system is given.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):6-14
6-14
Dynamic characteristics of stabilizing self-adapting linear and auto-oscillation non-linear systems with automatic compensation of static mistakes
Abstract
Self-adapting direction algorithms, providing for the elimination of static mistakes in linear systems and symetry of automatic oscillations in accord with demanded points in non-linear auto-oscillation systems having unsymmetrical directing limits and with constant additional revolts are worked out. Dynamic characteristics of the processes are also researched.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):15-20
15-20
The concept of development of an information system to support decision making in the management of complex technical systems
Abstract
The generalized structure for the selection of alternatives, which allows for stages of conceptual and formal modeling of complex technical systems, and object-oriented specification reasonably determine the composition and structure of the problems to be solved in the emerging information system to support decision-making and to determine the composition and structure of the query to the appropriate Multiple-based models and complexes.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):21-31
21-31
Systems approach in perfecting of organizational structure of the gas-distributing organization
Abstract
The complex analysis of operating organizational structure of the versatile enterprise on the example of the gas-distributing organization (GRO) is made. Stage-by-stage transformation of existing organizational structure is considered. Groups of the criteria characterizing balance, wholeness, controllability and reliability of organizational structure are created. The analysis of effectiveness of operating organizational structure of the gas-distributing organization and its modifications with use of methodology of the graph theory is carried out.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):32-42
32-42
Waterflooding process modeling using by weierstrass elliptic functions
Abstract
Waterflooding is one among several second oil recovery methods and it produces a high oil recovery rates by injection water into the oil keeping formation. Increasing waterflooding efficiency using by optimal well location scheme is an actual task. To achieve the corresponding goal we propose a program tool for well location schemes compare, both of by quantitative and qualitative characteristics. The program realization based on the oil keeping reservoir pattern represented a homogeneous formation with fixed thickness and infinite borders covering by dual periodical lattice: it includes production and injection wells into her cells. Also this lattice requires dual periodical property from the speed function defined on her cells. So we had used modified Weierstrass dzeta-function to describe oil-water filtering process in modeling reservoir.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):43-49
43-49
Ways of operational planning and scheduling development the tool production in machine-building plant
Abstract
This paper deals with some tool production peculiarities of an aerospace enterprise. Undeveloped issues in tool production process are discovered and the solutions to solve these problems are proposed.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):50-57
50-57
Designing of the model of raw materials supply management system for the industrial enterprises on the basis of the classical automatic control theory
Abstract
The new approach to the solution of a problem of raw materials supply management for the industrial enterprises which distinctive feature from existing is use of the classical means of the automatic control theory for designing of models, criteria and algorithms of supply management is stated. The example of the supply management systems model designing in the form of transfer functions and the results of numerical modeling of controlled processes in the software package Simulink are given.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):58-64
58-64
Designing of intelligent system for cargo transportation with consolidation
Abstract
Principles of designing intelligent scheduling system for transport logistics with cargo consolidations are described in the paper. The description of adaptive scheduling method based on multi-agent technologies are given.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):65-73
65-73
74-78
The accuracy increase of measurement of harmonious signals parameters on the basis of additional voltage formation
Abstract
The new method of measurement of harmonious signals parameters on their separate instant values is considered. Realization of a method provides exception of a voltage error of the phase-shifting block. Results of the analysis of a method’s error because of a deviation of real signals from harmonious model are considered.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):79-85
79-85
Experimental investigation of laser information-measurement systems for estimation of the aircraft surface
Abstract
Experimental investigations on aircraft surface reflecting characteristics were carried out. Reflectance behavior at pulse-periodic action at different intensity value was estimated. During investigation parameters of sound laser beam influence at probability of detecting and recognition the laser location installation was used. Contrast from incident angle, light wave and relative pulse duration dependencies were received. The experimental estimation of light wave to detecting probability influence at the aircrafts surfaces distance sounding was carried out.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):86-91
86-91
SHS porous metal – ceramic systems Ti-B-C using chemical furnace
Abstract
The results of investigation of porous metal-ceramic systems Ti-B-C, obtained by self-propagating high-temperature synthesis using chemical furnace. The effect of titanium amount in the mix material, the density of the workpiece on structure, chemical composition, porosity, and tensile strength of the samples have been investigated. The results of investigations with the Jeol JSM-6390A scanning electron microscope, ARL X'TRA diffractometer and of INSTRON 5988 multiple-purpose testing machine are given.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):92-98
92-98
The microbiological corrosion mechanism of oil and gas pipelines in the field and laboratory experiments
Abstract
Relationship between presence of some bacterial genera on internal surface of oilfield equipment (adhesion forms of corrosion caused bacterial consortium) and corrosion of this equipment was revealed. The typical structure of bacterial consortium caused corrosion of oilfield equipment was determined.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):99-104
99-104
Effect of aging temperature on the structure and hardness of the alloy 40HNU-VI
Abstract
Introduced the results of the study on the changes of the microstructure and hardness 40HNU-VI alloy, hardened in 1160-1140 ºС, depending on the aging temperature at the same holding time 5 hours.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):105-111
105-111
Hardenability caclulation for 14XH3MA, 15H3MA, 19XГМА bit steels produced by OJSC «Izhestal»
Abstract
This paper contains comparative analysis of hardenability of end quenching test and values calculated by chemical composition in accordance with ASTM A 255. Hardenability estimates by hardness on 6.5 mm and 30 mm depth from standard sample surface. Analytic formulas (ASTM A 255) are shown to be not applicable for these steels. Analytic equations «Hardness - Chemical composition» which predict hardness on 6.5 and 30 mm depth from standard sample surface with quite high accuracy were determined by regression analysis. These equations can be used for hardenability analysis of these steels if the input control of rolled metal quality instead of currently used hard gradient quenching method.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):112-119
112-119
120-123
Residual stresses and endurance limit of surface hardened specimens with different diameters radius
Abstract
Semicircular profile cut radius influence on cylindrical solid and hollow specimens made of steel 20 with 25 mm diameter endurance limit has been examined under outstripping superficial plastic deforming. It’s established that the endurance limit decreases with the increase of cut radius from 0,3mm to 1mm under the same type of hardening. It should be increase the specimens hardened superficial lay thickness under outstripping superficial plastic deforming for hardening effect conservation.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):124-131
124-131
Influence of the recycled abrasive grain on the quality of grinding wheels on a ceramic bond
Abstract
There are represented the results of physical and chemical researches of the recycled grain of white electrocorundum, including after its high-temperature heating. The influence of the recycled abrasive grain on geometrical parameters of semifinished products of wheels on a ceramic bond, the sizes and hardness of the grinding wheels containing from 10 to 75 % of recycled grain is investigated.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):132-140
132-140
Simulation of railcar body vibrations
Abstract
A complete system of rigid body dynamics equations applied to railcar body is introduced. This equation system is to model rail car multibody dynamics and to determine loads exerted on car elements in order to improve stability and safety of movement.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):141-147
141-147
Construction analysis and manufacture technology of fishing equipment
Abstract
In this paper was developed a physical model of the formation process of a threaded connection, which provides the reliability that is sufficient enough for fixing the fishing tool in the pipe body and the given load capacity for workover, and also a model of the process of surface hardening of thread microbeads. The recommendations to improve the process of manufacture of fishing equipment have been proposed.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):148-156
148-156
Nature of intensity change of the magnetic field round power four-vein cables or wires in production and office rooms
Abstract
The nature of intensity change of total strain values of magnetic field of industrial frequency in the form of circular charts and maximum values round power three-phase four-vein cables of power supply systems for symmetric and not full-phase modes of loading is shown.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):157-166
157-166
Modeling of time-optimal control system of the induction heating processes with interval of uncertainty characteristics of the object
Abstract
The aim of this paper is to show the effectiveness of an optimal control system with identifier of uncertainty characteristics of the object in comparison with the control system where the all characteristics of the object are supposed to be known.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):167-174
167-174
Definition equivalent circuit parameters of three phase asynchronous motors
Abstract
The problem of determining the parameters of the equivalent circuit of asynchronous electric motors with squirrel-cage rotor and slip ring on the catalog data in order to build their mechanical characteristics is considered. Method for determining the parameters of the equivalent circuit with subsequent evaluation of the results of convergence solutions is developed.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):175-184
175-184
185-191
Technological support of reliability of the automobile generating installation (GI)
Abstract
The most widespread types of refusals of automobile generating installation are considered. The general factors and the reasons of emergence of refusals are revealed. Recommendations of their elimination and the prevention are given.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):192-197
192-197
The linear coefficient inverse heat conduction problem based on alternance ortimization method
Abstract
Inverse thermal conductivity problem is considered as coefficient problem for linear parabolic equation. To identify the average thermal parameters the problem is formulated as an optimization problem of process with distributed parameters. The conditional-correct formulation of problem is stated. Solution is based on the alternance properties desired extremals.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):198-202
198-202
203-210
Investigation of process of hydrotreating of petroleum fractions and slow carbonizated gasoline on the basis of technical catalysts
Abstract
In this paper the results of the investigation of the process of hydrotreating of petroleum fractions and slow carbonizated gasoline on the basis of technical catalysts of the 21-10/5К OJSC Novokuibyshevsk Refinery complex are represented.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):211-218
211-218
To the question of the stability of the mathematical model of competitive behavior of the two economic agents
Abstract
The paper considers the stability of the nontrivial equilibrium position dynamic model of the competitive behaviour of the two economic agents, described the system of nonlinear differential equations with retarded argument.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):219-222
219-222
223-226
227-229
Error estimation of method of integrated characteristics measurement on instant values of the signals divided in time and space
Abstract
The analysis of method errors of integrated characteristics measurement with use of spatial and temporary division of instant values of harmonious signals is carried out. The received results allow choosing optimum parameters of measuring process for providing the least error.
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):230-234
230-234
235-238
Effect of temperature fluctuations of the polymer melt at extruder outlet performance on the formation of cables
Abstract
The work was carried dependency analysis of operating characteristics and the quality of the coaxial cable from the LAN-void ratio when applied to the phase conductor is chemically foamed insulation. Was determined relationship between the residence time of the polymer in the metering and temperatures for decomposition of 90% blowing agent, based on which numerical values obtained impedance changes and the reflectivity of individual brands of cables due to temperature fluctuations in the melt within the extruder outlet 160±0,5 ºC .
Vestnik of Samara State Technical University. Technical Sciences Series. 2013;21(3):239-243
239-243