Vol 7, No 5 (2006)

Articles

Raise of accuracy of positioning of intratrumpet inspection gears with use of data GLONASS/GPS

Andropov А.V.

Abstract

It is considered the integration of data of the strapdown inertial navigational system of intratrumpet gear and coordinate data of points of correction (magloggers) equipped by receivers GLONASS/GPS with use of filtering and smoothing algorithms.
Siberian Aerospace Journal. 2006;7(5):3-7
pages 3-7 views

Aluminum reduction cell preheat studying using mathematical modeling

Arkhipov A.G., Polyakov P.V.

Abstract

Preheat and start-up stage is the one of the most important factors impacts on aluminum reduction cell life. In the whole aluminum industry isn't common opinion about the best way of the cell preheating and start-up yet. This article about two the most popular kinds of cell preheat studying using mathematical modeling for calculation of thermal, electrical fields and stress-strained state with help of finite-element code ANSYS and CFD code Star-CD.
Siberian Aerospace Journal. 2006;7(5):8-14
pages 8-14 views

Structure of the problem-oriented language of spacecrafts tests

Barkov A.V.

Abstract

Requirements to the problem-oriented language of spacecrafts tests are considered. The language structure, which answer the requirements, is worked out. It is described the opportunities of language.
Siberian Aerospace Journal. 2006;7(5):15-18
pages 15-18 views

Heat dynamic model for controlling of aluminium electrolysis process

Belolipetsky V.M., Piskazhova T.V., Emelyashin M.V.

Abstract

The heat dynamic model of aluminium electrolysis is demonstrated. It is created for controlling of technological process in the real time. The model bases on aluminium cell schematization in special areas and zerodimensional submodel.
Siberian Aerospace Journal. 2006;7(5):19-24
pages 19-24 views

Modelling of nickel alloys surface anodic corrosion processes in high-temperature electrolysis condition

Biront V.S., Drozdova T.N., Baturova V.V., Voinich A.L., Kim Y.V.

Abstract

Factors, which influence on the nickel anodes corrosion in high-temperature electrolysis condition, are discussed. Cavitation modeling evenly reflects real-upcoming processes of nickel alloys degradation in aluminum electrolysis and permits to forecast and adjust them.
Siberian Aerospace Journal. 2006;7(5):25-29
pages 25-29 views

The technical exploitation of civil aviation airplanes aggregates problems and possibilities of strategies changing

Boyko O.G., Zosimov A.G., Shaymardanov L.G.

Abstract

Using the analysis of loading conditions and steering wheel drives and aggregates reliability the possibility of the technical service strategy changing are considered.
Siberian Aerospace Journal. 2006;7(5):30-33
pages 30-33 views

Algorithm of integral multiplicity reducing for rational algebraically exact differential form with quasielliptic denominator

Burachenko M.V.

Abstract

It is considered a method of integral multiplicity reducing for rational algebraically exact differential from with quasielliptic denominator. It is described the algorithm and presented its implementation in the algebraic computer system Maple 9.
Siberian Aerospace Journal. 2006;7(5):34-42
pages 34-42 views

Changing of copper oxides phase structure at sulfur introduction

Bychkov P.S., Vlasov O.A.

Abstract

Interaction of two copper oxides (CuO and Cu2O) with sulfur is considered. The first copper oxide is received from the second one at heating to various temperatures and the following subsequent training. It is shown that at sulfur introduction a number of nonstoichiometric sulfides is formed and their nonstoichiometry depends on of the entered.
Siberian Aerospace Journal. 2006;7(5):43-46
pages 43-46 views

Application of quality function depending on weight during investigation of averaging systems

Vasilyev S.B.

Abstract

New quality function of mineral wealth is offered. The function depends on weight not time and allows constructing more simple mathematical models of averaging systems. With a help of it the new mathematical model of known from literature averaging stack is constructed, the deep analysis of averaging process is mode, the recommendations of stack parameters choosing and other practical conclusions are given.
Siberian Aerospace Journal. 2006;7(5):47-50
pages 47-50 views

Ideas of the form of geographical objects in toponymic picture of world

Vasilyeva S.P.

Abstract

It is given semantic-onomasyologic analysis of toponyms of from, it is uncovered mental-toponymic stereotypes of perception and comprehension of geographical objects in a space, it is singled out nuclear and peripheral toponymic models of regional toponymic picture of world.
Siberian Aerospace Journal. 2006;7(5):51-56
pages 51-56 views

Development of commercial calculation in the agriculture

Vinokurov G.M.

Abstract

It is considered the questions of the realization of commercial calculation in the agriculture as the most effective method of keeping.
Siberian Aerospace Journal. 2006;7(5):57-59
pages 57-59 views

About the essence of the notion «social interaction» in science researches

Vrublevskaya O.A.

Abstract

It is considered the essences of the notion «interaction» and «social interaction» and also their development. It is given many interpretations of this term from scientific works. It is cleared up the methodological effect of interaction and pointed out two main types of interaction - cooperation and competition, and kinds of social interaction. There is the conclusion about the essences of this notion in science.
Siberian Aerospace Journal. 2006;7(5):60-65
pages 60-65 views

Multifactor and multistage technique of business game organization

Grinberg G.M.

Abstract

It is considered the problems of development and application of the new educational forms and methods, directed toward increasing the students' creative activity and specialists' training quality. The choice of business game as one of the active training forms is proven. A business game allows to stimulate the students' cognitive activity disciplines of specialization studying at. A modular approach to business game building is suggested. The essence of it is: some disciplines are grouped in a certain way in a module and cognitive process activation takes place all the time of studying the certain module disciplines.
Siberian Aerospace Journal. 2006;7(5):66-71
pages 66-71 views

Detection of chemical elements associationsin the «Сontamination source - technologic flow - deposit environment» chainon the example of Achinsk town agglomeration

Dvoretskaya U.B.

Abstract

The environmental situation in Achinsk is considered. Achinsk Alumina Combine (AAC) is the most powerful source of technologic influence. Chemical elements associations in the AAC main raw material (urtites), soils, covers of snow, surface and underground waters were detected by the factor analysis. It is determined that correlation connections of chemical elements in urtites partially retain in technologic flows and deposit environments.
Siberian Aerospace Journal. 2006;7(5):72-77
pages 72-77 views

Structural reformations and multiplicative effects in the sphere of consumption in the Russian economy

Demchenko S.K.

Abstract

It is covered a problem of interdependence between multiplicative effects and structural changes in the sphere of consumption in the economy of Russia and Krasnoyarsk region. The computation of consumption function for the contemporary Russian economy is carried out.
Siberian Aerospace Journal. 2006;7(5):78-82
pages 78-82 views

Decreasing of the contact voltage in rolling bearing using lubricants with nanoparticles

Dokshanin S.G., Dokshanina I.I.

Abstract

The possibility of increasing the durability of rolling bearings using elastic lubricants with nanoparticles,which decrease the contact voltage on the rolling surface is considered. The results of the analysis of distribution of normals and tangent voltage on the contact area of the rolling bearing are presented.
Siberian Aerospace Journal. 2006;7(5):83-86
pages 83-86 views

Decision of task of direct and reverse transformation between colored petri nets and businessmodels

Dorrer M.G., Kurokhtin V.V.

Abstract

It is considered the methods of translating business models into colored Petri nets for the purpose of source process analysis by the imitation modeling.
Siberian Aerospace Journal. 2006;7(5):87-89
pages 87-89 views

Restoration of structure of the business-processes model of the organization on the basis of the parameters of Markovs chain calculated on the workflow-system data

Dorrer M.G., Nekrasova A.A.

Abstract

It is considered the approach to the decision of a problem of identification of structure of business-processes model of the organization on the basis of the objective data taken from corporative information system. It is shown that the flat tables with headings of electronic documents attributed with the date of departure, the sender and the addressee (including indirectly) allow to restore parameters of Markovs chain, describing the organizational system. Received likelihood characteristics of business-system allow to estimate the structure of the business-processes model.
Siberian Aerospace Journal. 2006;7(5):90-95
pages 90-95 views

Identification of figure parameters of business-process by automatized control system data

Dorrer M.G., Slyusarenko V.V.

Abstract

It is considered the methods of business-processes parameters identification according to automatized control systems of low (middle) class economical systems.
Siberian Aerospace Journal. 2006;7(5):96-98
pages 96-98 views

Logic-sense model of pedagogical tolerance

Yepina M.B.

Abstract

It is considered the structure of pedagogical tolerance as a teacher's professionally important quality. This structure is show as the logic-sense model, which opens the possibility for the deeper studying of the intensification of its forming processes mechanisms.
Siberian Aerospace Journal. 2006;7(5):99-102
pages 99-102 views

Negation in manner of speech of Russian Germans in Mansky district (Krasnoyarsk region)

Ermyakina N.A.

Abstract

It is considered the basic directions of negation language models research, and it is also given the analysis of negating models of one of the west middle-German manners of speech, which exists on territory of Mansky district of Krasnoyarsk region, in comparison with literature German language.
Siberian Aerospace Journal. 2006;7(5):103-107
pages 103-107 views

The usage of granular wastes of aluminium alloys for producing of small section rods and wires

Zagirov N.N., Yurikov A.S.

Abstract

It is given the results of explorations of the technologies of small section rods and wires production from granular wastes, which are formed by cutting of aluminium profiles to measure lengths. It is shown that accurate gathering of such kind of wastes and application of combine treatment methods give the possibility for getting semimanufacture items and products with the necessary level of mechanical characteristics without power-intensive stage of waste refining.
Siberian Aerospace Journal. 2006;7(5):108-110
pages 108-110 views

Supply-demand balance in the regional Supply-demand complex management system

Zyryanov V.V.

Abstract

The region power engineering development outlooks, problems of energy intake and generation are considered. The problems and approaches to the regional supply-demand balance development as the main instrument to form regional socio-economic policy are analyzed.
Siberian Aerospace Journal. 2006;7(5):111-114
pages 111-114 views

Planning of the city passenger transport service volume гunder market economy

Ibragimov M.Z.

Abstract

Methods of statistic analysis of the city passenger transport work results as the elements of service volume planning mechanism are considered. A possibility of addition the planning aspects into the existent management system with regular organizing structure is studied too.
Siberian Aerospace Journal. 2006;7(5):115-119
pages 115-119 views

Influence of technological factors on the initial stage of allocation from a bark of fir oil

Ignatov A.S., Khizhnjak S.V., Stepen R.A.

Abstract

Dynamics of allocation of ethereal oil from wood greens and coniferous trees bark species using water steam in the interval of 100…180 оС is investigated. It is shown that half of its volume is allocated at 130…180 оС during the first 9 minutes.
Siberian Aerospace Journal. 2006;7(5):120-122
pages 120-122 views

Influence of geometrical construction of knife garniture on the fibred treatment suspension process

Karbyshev М.А., Alashkevich J.D., Nabieva A.А.

Abstract

The examined experimental researches in the area of fibred materials grinding by the knife method.
Siberian Aerospace Journal. 2006;7(5):123-127
pages 123-127 views

The international systems of classification of dangerous space objects

Kvashennikov V.I.

Abstract

It is given the information about international danger cosmic objects classification systems. There are two classification scales: Turin's and Palermo'S. There is a diagram, a dangerous level identification table and calculation formulas.
Siberian Aerospace Journal. 2006;7(5):128-129
pages 128-129 views

Shock effect at influence of knife garniture as a factor of upgrading grinding

Kozhukhov V.A., Kovalev V.I., Alashkevich J.D.

Abstract

The analysis of theoretical and experimental researches in the area of fibred materials grinding by a knife method is examined.
Siberian Aerospace Journal. 2006;7(5):130-132
pages 130-132 views

Integration of high school science and industry is an effective way of innovative enterprise development

Kolmykov V.A.

Abstract

The actual problem of innovative development management of one of the defence-industrial complex enterprises on the basis of integration results of High School and industry applied researches is considered.
Siberian Aerospace Journal. 2006;7(5):133-134
pages 133-134 views

State regulation of enterprises foreign trade activity

Kuznetsova V.A., Fomina L.A.

Abstract

The results of enterprises foreign trade are under the state regulation influence. The problem of its influence valuing is considered.
Siberian Aerospace Journal. 2006;7(5):135-139
pages 135-139 views

Non-blade processing of fibred suspense using the mobile barrier

Marchenko R.A., Alashkevich J.D., Reshetova N.S.

Abstract

It is presented the results of experimental researches of fibred materials grinding process non-blade. It is considered influence of changing the number of shoulder-blades of driving wheel of turbine on the process of the hydrodynamic grinding of fibred materials.
Siberian Aerospace Journal. 2006;7(5):140-144
pages 140-144 views

Magnetic transformations in non-stechiometric minerals of pyrrotite type

Mashukov A.V., Onufriyonock V.V.

Abstract

There was investigated the change of magnetization of non-stehiometric pirrotites depending on the concentration of vacancies in their structure. For the first time in the frame of the model of the four-sub-grate ferri-magnetic it is given a theoretical description of magnetic transformations in non-stechiometric ferri-magnetics. For explaining the effect of the ordering of vacancies it is used the method of the secondary quantization. It should be noted that the operators correspond to the quantum statistics of Pauli. The calculations are made considering the interactions between the cat ion vacancies. It is noted that the appearance of the vacancy interaction is explained by breaking the connections of d-electronic tracks and forming of non-compensated electrical charge on the vacant unit consequently.
Siberian Aerospace Journal. 2006;7(5):145-149
pages 145-149 views

Ferri-magnetic pyrrotites in a metastable condition

Mashukov A.V., Onufrienock V.V., Siminchuk S.A.

Abstract

It is investigated the magnetic properties of Ferrous sulphides in a metastable phase condition. Ferrous sulphides with composition Fe7S8, decrease of magnetization practically to a zero when hardening with the temperature of synthesis. It is shown that the observed effect is explained not only by the redistribution of the vacancies of iron ions in a basic plane of the crystalline structure of the type NiAs, but by the processes of the spin flip on the node. There offered a theoretical model explaining this phenomenon qualitatively.
Siberian Aerospace Journal. 2006;7(5):150-154
pages 150-154 views

Multimodal transport junction in Krasnoyarsk region

Medvedev V.L.

Abstract

Krasnoyarsk region transport complex state is considered and the synthesis of all transport types of Krasnoyarsk region and establishment of transport-logistic centre on this basis are analyzed.
Siberian Aerospace Journal. 2006;7(5):155-158
pages 155-158 views

The estimating method of the civil aviation airplanes functional systems reliability with a help of the user's statistic materials

Madvedev V.L., Boyko O.G., Zosimov A.G., Shaymardanov L.G.

Abstract

The determination of reliability of the airplanes functional systems with a help of the user's statistic materials in direct indexes, which are normed by the norms of the flying suitability are considered. The estimation method of reliability of the airplanes functional systems is proposed. It may be used for the whole airplane park and for the concrete user's airplanes.
Siberian Aerospace Journal. 2006;7(5):159-164
pages 159-164 views

Reliability of the functional systems of long exploiting civil aviation airplanes

Medvedev V.L., Zosimov A.G., Shaymardanov L.G.

Abstract

The questions of getting old and changing of the functional systems reliability of the long exploited civil aviation airplanes are considered.
Siberian Aerospace Journal. 2006;7(5):165-170
pages 165-170 views

The protected data transmission network on the message controller basis

Mescheriakov R.V., Rososhek S.K., Shelupanov A.A., Son'kin M.A.

Abstract

It is covered a data transmission network in system with the limited resources at the distributed organization of information processing for various operating modes. It is carried out comparative analysis of a computing complexity and demanded memory sizes.
Siberian Aerospace Journal. 2006;7(5):171-175
pages 171-175 views

Problem of «teacher - student» relationship in the pedagogical accompanying

Mitchourin M.V.

Abstract

It is considered the different relationship approaches to «teacher - student» and «student - student» and revealed the mechanism of relationship in the pedagogical accompanying.
Siberian Aerospace Journal. 2006;7(5):176-179
pages 176-179 views

About a feasibility of ultrasonic oscillations at improvement of high include clay anthropogenic deposits

Naymushin A.S.

Abstract

The problem of mining unprofitable including clay anthropogenic deposits is described; the outcomes of applying of ultrasonic waves in a way of hydraulic mining by boreholes are submitted. It allows entering into improvement anthropogenic deposits with the small contents of a useful component, which mining by known in the given moment methods is not possible.
Siberian Aerospace Journal. 2006;7(5):180-183
pages 180-183 views

The strategy of investment attractions in Russian industry

Ognev D.V., Nechaev A.S., Dubynin A.R.

Abstract

It is considered the problems of foreign investment attractions in the real sector of economy and the ways of their solution. In the authors' opinions, the solution is in the creation of the competitiveness clusters of vertically interrelated sectors of economy, and also in affecting the special area status to basic economic regions, cities or agglomerations wits giving special grants to foreign investors for development of specific industrial clusters.
Siberian Aerospace Journal. 2006;7(5):184-187
pages 184-187 views

Thermodynamics of cupper recovering from oxygen and sulphide compounds

Oleynikova N.V., Chekushin V.S.

Abstract

It is shown the results of thermodynamic analysis of cupper recovering from oxygen and sulphide compounds with using as a restorer the electric-donor carbonic, hydrocarbon substances, hydrogen and also sulfide sulfur.
Siberian Aerospace Journal. 2006;7(5):188-193
pages 188-193 views

Stability of Toeplitz type matrixes and their positive determination

Osipov V.M., Osipov V.V.

Abstract

For the first time the term and the meaning of Toeplitz type matrixes stability are given in. It's connected with a stability of linear dynamic systems phenomenon, which models worked out on the point method have Toeplitz type matrixes as a transmission. It is also set the connection of the matrixes with the known notion of positive matrixes determination.
Siberian Aerospace Journal. 2006;7(5):194-200
pages 194-200 views

Magnetohydrobynamic mixing of aluminum alloys in resistive tilting furnaces

Pavlov Е.А., Bogovalov S.V., Timofeev V.N., Nadtochiy D.S.

Abstract

It is considered the results of transient and static magnetohydrobynamic mixing of aluminum alloys in the resistive tilting furnace modeling. Mathematical simulation is accomplished on the base of joint Ansys Emag and Ansys CFX programs.
Siberian Aerospace Journal. 2006;7(5):201-205
pages 201-205 views

The peculiarities of the world outlook formingof blind-аnd-deaf people

Potylitsina L.A.

Abstract

It is covered the peculiarities of the world understanding of blind-and-deaf people. It is shown the possibility of the achievement rather elevated level of consciousness and self-consciousness in situation of the special conditions creating for blind-and-deaf people.
Siberian Aerospace Journal. 2006;7(5):206-210
pages 206-210 views

Estimation of innovative potential of the region

Sangadiev Z.G., Ayusheeva L.A.

Abstract

Knowledge about quantitative and qualitative characteristics of innovative potential of the region enables to possess the tools for the important resource managing in order to achievement the innovative objects of the region managing in the contemporary circumstances. Conclusions of this work tell about essentials urgency of further investigations on this theme.
Siberian Aerospace Journal. 2006;7(5):211-215
pages 211-215 views

Forecasting methods of the region economy needs for specialists

Sangadiev Z.G., Skotnikov S.N., Zhyrnova A.U.

Abstract

The forecasting methods of needs for specialists in the regional economy sphere are suggested on the basis of labour-market analysis in Krasnoyarsk region, the methods are founded on the demand mathematical modeling principles and are drawn up for the particular federation region.
Siberian Aerospace Journal. 2006;7(5):216-220
pages 216-220 views

Lising as a financial support method of small business subjects

Sanjimitoupov D.Z.

Abstract

It is covered the problems of forming of the effective financial support system of small business subjects, on the example of Aginsk district.
Siberian Aerospace Journal. 2006;7(5):221-223
pages 221-223 views

Evolution of banking system role in creation of financial conditions of economic growth in market economy

Sevastyanova E.P.

Abstract

The changes of banking system influence on economic growth during market economy evolution are considered and the essence of this influence in modern market economy is determined. It is shown that money endogenization, that is a result of banking system development, substantially extends possibilities of the market system to finance investments.
Siberian Aerospace Journal. 2006;7(5):224-229
pages 224-229 views

Convergence domains of hypergeometric series in manifolds of Kalaby - Yau theory

Semusheva A.Y.

Abstract

The examples of manifold Calabi - Yau diversity are shown and convergence domains of hypergeometric series presenting the periods of this diversity are calculated.
Siberian Aerospace Journal. 2006;7(5):230-232
pages 230-232 views

Designing of new technologies for combined processing of the aluminium-silicon alloys

Sidelnikov S.B., Dovzhenko N.N., Gorbunov J.A., Gorbunov D.Y., Lopatina E.S., Sokolov R.E.

Abstract

The results of explorations of new «know-how» of hot and hard-wrought products from stock materials of the aluminum-silicon alloys received by various aspects of casting are given. It is shown that application of the combined processing methods of such alloys enables to gain semi manufactured materials and products with a required level of speed-torque characteristics.
Siberian Aerospace Journal. 2006;7(5):233-233
pages 233-233 views

Designing of tool and technology for producing hollow welded structures by combined methods

Sidelnikov S.B., Dovzhenko N.N., Sokolov R.E., Petshansky A.S., Pletykhin S.A.

Abstract

The technique of automation of designing of combined rolls pressing process for reception of hollow welded structures from nonferrous metals and alloys is given. The description of a subsystem of the automated designing system is resulted and examples of technology and tool designing with its help are given.
Siberian Aerospace Journal. 2006;7(5):236-238
pages 236-238 views

The forms and directions of social state policy

Sochneva E.N.

Abstract

The genesis of social state is revealed, its criteria are given, different classifications of social state models are drawn. On their base the most probable model of Russian social economy development is determined.
Siberian Aerospace Journal. 2006;7(5):239-243
pages 239-243 views

System analysis of relations between railway transport main operation factors

Suprun V.N.

Abstract

It is given the results of correlation analysis of the main work factors of Russian railway transport. Calculations of 49 operation factors of 15 Russian Federation Railways for the period of 5 years are done. Formal and informal analyses of the results are made. The results confirmed the effectiveness of methods.
Siberian Aerospace Journal. 2006;7(5):244-248
pages 244-248 views

Methods of the competition level estimation on elections (on the example of local elections in Krasnoyarsk)

Suhovolsky A.V.

Abstract

Questions of the competition level estimation on elections in the Russian Federation, and also the opportunity and efficiency of using various statistics of competition are considered. The analysis bases on materials of electoral statistics of Krasnoyarsk municipal elections.
Siberian Aerospace Journal. 2006;7(5):249-252
pages 249-252 views

Peculiarities of modern stage of aerospace industry development and new requirements for specialists training

Philatov V.V.

Abstract

Nowadays a number of region enterprises are among leading firms of our country in rocket and space production. Necessity of scientific and personal provision in space projects realization causes the organization of non-standard forms of specialists training.
Siberian Aerospace Journal. 2006;7(5):253-256
pages 253-256 views

Metaphysics and dialectic of social projects

Chaschina A.A.

Abstract

It is considered the social projecting as action of making and delivering of social projects of metaphysical and dialectical character.
Siberian Aerospace Journal. 2006;7(5):257-262
pages 257-262 views

The concept of modern technologies formation for heavy nonferrous raw material processings

Chekushin V.S., Oleynikova N.V.

Abstract

Classification of heavy nonferrous metals metallurgical process during manufacturing is represented as a combination of preparation-concentrating, recovering and refining repartitions. The special attention is paid to the essence of metals recovering from oxygen compounds. The opportunity of metals recovering directly from their sulphide compounds with the use of electric-donor abilities of sulfur is examined.
Siberian Aerospace Journal. 2006;7(5):263-266
pages 263-266 views

The substantiation of mining technology at ore opencasts having overburden backlog

Cherepanov E.V.

Abstract

It is examined the calculation methods of the parameters of mining technology at ore opencasts with overburden backlog. They take into account the ore and overburden volume in opencast boundaries at the present stage of the operation, the productivity of the equipment and the annual volume of ore extraction.
Siberian Aerospace Journal. 2006;7(5):267-270
pages 267-270 views

Control methods of energy conversion devices in the power supply systems of automatic space vehicles

Shinjakov Y.A.

Abstract

It is considered control methods of energy conversion devices in the power supply systems of automatic space vehicles, which provide enhanced stability of output voltage and current, and also a possibility of the parallel operation of onboard power supplies.
Siberian Aerospace Journal. 2006;7(5):271-276
pages 271-276 views

About the problems of technological and ecological estimation of gold deposits and invairomental progects invest

Shtresler K.A.

Abstract

The problems of technological and ecological estimate of gold deposits connected with geological and hierological conditions. There is the project of elaboration of the deposit estimating express methodology.
Siberian Aerospace Journal. 2006;7(5):277-279
pages 277-279 views

SVEDENIYa OB AVTORAKh

- -.
Siberian Aerospace Journal. 2006;7(5):280-285
pages 280-285 views

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies