检索

期
标题
作者
卷 91, 编号 2 (2024)
The facility for rapeseed peeling in the ultrahigh frequency electromagnetic field
Kuchin N., Tsuglenok N., Storchevoy V., Storchevoy A.
PDF
(Rus)
卷 91, 编号 1 (2024)
Justification of usability of the heat accumulator of phase transition in vehicles’ engines pre-start warming-up procedure
Kolunin A., Kaminsky V., Apelinsky D., Lazarev E., Korytov M.
PDF
(Rus) PDF
(Eng)
卷 88, 编号 5 (2021)
Study of load level of bearing-outlet units of turbocharger with impellers from composite materials
Fomin V., Kaminsky V., Kaminsky R., Netrusov A.
PDF
(Rus)
卷 83, 编号 9 (2016)
The use of term «sintered powder frictional material»
Il'yushchenko A., Leshok A., Rogovoy A., Sharipov V.
PDF
(Rus)
卷 78, 编号 6 (2011)
The application of statistical method to the fractionation of light waste in settling chamber
Saitov V., Farafonov V., Suvorov A.
卷 76, 编号 5 (2009)
Novyy tekhnologicheskiy priem povysheniya urozhaynosti zemlyaniki
Skachkov M.
卷 83, 编号 8 (2016)
Assessment of model adequacy of the process of grain impurities separation from the fraction of light waste in settling chamber to experimental results
Saitov V., Suvorov A.
PDF
(Rus)
卷 81, 编号 4 (2014)
Microprofile formation on the surface of 65Г steel under friction with МК-5 metalloceramic friction material
Ilyuschenko A., Dmitrovich A., Leshok A.
卷 78, 编号 3 (2011)
Up-to-date sintered metal-ceramic friction composite materials and products
Ilyuschenko A., Dmitrovich A., Leshok A.
卷 85, 编号 6 (2018)
Differential distribution of hardening materials on cutting blades of soil processing machines
Myalenko V.
PDF
(Rus)
卷 83, 编号 1 (2016)
Research of movement of hexagonal and circular disk working organs of tillage machines
Kobyakov I., Yevchenko A.
PDF
(Rus)
卷 81, 编号 9 (2014)
Special device for application of encrusting solution on corn seeds
Kushnir V., Kim N., Shilo I., Romanyuk N., Astrakhan B., Ageychik V., Shmat T.
卷 79, 编号 8 (2012)
Reliability and durability of hydraulic cylinders made of metal-silica composite material
Tavasiyev R., Lyanov M., Ivanchenkov V., Kozayev T.
卷 78, 编号 1 (2011)
Throughput capacity analysis of the spiral-screw feeder
Zolotariov P.
卷 85, 编号 2 (2018)
Method and results of the evaluation of the influence of the energy of grain recovery, contacting in the head with header fairing on its parameters and quality of work
Bur’yanov A., Bur’yanov M., Chervyakov I.
PDF
(Rus)
卷 83, 编号 2 (2016)
Substantiation of design parameters of extruder and determination of extrudate quality
Kushnir V., Gavrilov N., Kushnir A.
PDF
(Rus)
卷 82, 编号 1 (2015)
Agraer-850H tractor-drawn wide-cut combined sowing unit
Saitov V., Gataullin R.
卷 79, 编号 7 (2012)
Analysis of marker's trajectory in horizontal spiral-screw mechanism
Zolotariov P.
卷 78, 编号 1 (2011)
Distribution of the grain material components on the grid of pneumatic fluidizing device
Saitov V., Suvorov A.
卷 85, 编号 2 (2018)
Optimization of the reinforcing layer of the compressor wheel from the composite material of the diesel turbocharger
Netrusov A., Fomin V.
PDF
(Rus)
卷 82, 编号 11 (2015)
Test bench for full-scale specimens of sintered polymer friction disks and metallic counterbodies
Saroka D., Rogovoy A., Leshok A.
卷 79, 编号 7 (2012)
A closed small-sized pneumatic separator for seed cleaning
Saitov V., Grigoryev D.
卷 77, 编号 6 (2010)
A primary technical expertise of pneumatic separator with turning barriers
Gimadiyev A.
卷 85, 编号 3 (2018)
The influence of the properties of materials used to make the working bodies of the stripper header on the quality of the performed process
Bur'yanov M., Chervyakov I., Bur'yanov A.
PDF
(Rus)
卷 79, 编号 10 (2012)
Recovery of machine body parts by combined structured coatings
Kotin A., Sivtsov V., Konakov A., Rusyayev A.
卷 79, 编号 1 (2012)
Assessing the influence of number of metal-ceramic friction disks in the brake assembly on the braking performance
Ilyuschenko A., Dmitrovich A., Bagnychev S., Karpyza S., Leshok A.
卷 77, 编号 5 (2010)
Reducing grain damage during the separation with ascending air stream
Gimadiyev A.
卷 84, 编号 8 (2017)
Determination of gas concentration in the lubricant of transmissions of energy-saturated agricultural tractors
Shukhanov S.
PDF
(Rus)
卷 79, 编号 12 (2012)
MK-5 frictional material produced with the use of free filled layer technology
Ilyuschenko A., Leshok A., Shapovalova O.
卷 79, 编号 2 (2012)
Analysing the process of loose material transportation in a horizontal flexible auger
Zolotariov P.
卷 77, 编号 3 (2010)
Heating the working member of spiral screw transporter
Zolotariov P.
卷 84, 编号 2 (2017)
INVESTIGATION OF STRENGTH PROPERTIES OF IMPELLERS MADE OF COMPOSITE MATERIAL FOR DIESEL ENGINES
Netrusov A., Fomin V.
PDF
(Rus)
卷 80, 编号 2 (2013)
Electric vibrating electrode arc strengthening of working organs of soil cultivating machines with the use of ceramic-metal materials
Litovchenko N., Titov N., Kolomeychenko A.
卷 78, 编号 6 (2011)
Friction materials for hydromechanical transmissions
Ilyuschenko A., Dmitrovich A., Shapovalova O., Leshok A.
卷 77, 编号 4 (2010)
Energy-saving separator for the grain material cleaning
Yampilov S., Tsybenov Z., Tsydypov T.
卷 81, 编号 1 (2014)
Renewal and strengthening of A-hoe blades for cultivating machines using ceramic-metal materials
Titov N., Kolomeychenko A.
1 - 36 的 36 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##