期 |
标题 |
文件 |
卷 18, 编号 4 (2024) |
Study of operability of the diesel fuel injection equipment in non-conventional conditions |
 (Rus)
|
Plotnikov S., Zykov E., Kutergin N., Plekhov D., Kartashevich A.
|
卷 18, 编号 4 (2024) |
The turbocharger for a four-stroke gasoline engine of the Formula SAE racecar |
 (Rus)
|
Dementiev A.
|
卷 18, 编号 2 (2024) |
Characteristics of ammonia combustion and modern studies of combustion stabilization |
 (Rus)
|
Dementiev A., Telpiz E., Rybachuk V.
|
卷 18, 编号 2 (2024) |
Development of methods of adaptation of gas-diesel engines of agricultural tractors to operation using LPG |
 (Rus)
|
Godzhaev Z., Uyutov S., Ovchinnikov E.
|
卷 18, 编号 1 (2024) |
The monoreactive multibody floating-frequency oscillator |
 (Rus)
|
Popov I.
|
卷 17, 编号 4 (2023) |
Identification of maximal cyclic pressure with the non-motorized method based on specific refraction |
 (Rus)
|
Plotnikov S., Gnevashev P., Smolnikov M., Shishkin G.
|
卷 17, 编号 4 (2023) |
Exergy analysis of thermodynamic performance of a gas turbine unit |
 (Rus)
|
Komarov O., Sammour A., Zubkov I., Blinov V.
|
卷 17, 编号 3 (2023) |
Numerical simulation of the diesel engine starting considering air pre-heating in the intake system |
 (Rus)
|
Elagin M., Khmelev R.
|
卷 17, 编号 3 (2023) |
Increasing the wear resistance of the ICE’s valves with the laser cladding method |
 (Rus)
|
Zavitkov A., Loktev A., Lyukhter A.
|
卷 17, 编号 2 (2023) |
Innovative developments on the use of hydrogen in transport internal combustion engines and power plants |
 (Rus)
|
Shabanov A., Dunin A., Vanin V.
|
卷 17, 编号 2 (2023) |
To the question of the description of the internal combustion engine in the mathematical model of the lifting system of the hovercraft (on the example of the ZMZ-51432.10 CRS engine) |
 (Rus)
|
Lepeshkin A., Nguyen V.
|
卷 17, 编号 2 (2023) |
Ways to improve performance of an internal combustion engine regarding the loading conditions of vehicle transmission |
 (Rus)
|
Berdnikov A., Shangutov A., Shilonosov A.
|
卷 17, 编号 1 (2023) |
Use of a high-efficiency bimetallic recuperator of micro gas turbine units with the power of under 100 kW |
 (Rus)
|
Chu V., Rassokhin V., Barskov V., Matveev Y., Laptev M., Basati Panah M.
|
卷 16, 编号 4 (2022) |
Increasing the efficiency of the lubrication system of a modern internal combustion diesel engine |
 (Rus)
|
Khannanov M., Alimgulov E., Fardeev L., Kulikov A., Gumerov I., Gubaidullin R., Mukanov G., Doikin A.
|
卷 16, 编号 4 (2022) |
The study of fuel accumulation in the oil of a gasoline engine with direct fuel injection |
 (Rus)
|
Krasnov V., Terenchenko A., Timofeev D., Shibaev I., Stepin N.
|
卷 16, 编号 3 (2022) |
Prediction of ignition time delay in a diesel engine when using composite fuel |
 (Rus)
|
Buzikov S.
|
卷 16, 编号 3 (2022) |
Results of application of porous permeable SHS catalytic blocks in multistage converters,
diesel exhaust gases |
 (Rus)
|
Melbert A., Nguyen T., Mashensky A., Sokolova V.
|
卷 16, 编号 2 (2022) |
Influence of cooling of high temperature vane systems on efficiency gas turbine units regarding working substance specific heat capacity dependence on temperature |
 (Rus)
|
Basati Panah M., Rassokhin V., Barskov V., Okunev E., Laptev M., Kortikov N., Chu V., Gong B.
|
卷 16, 编号 2 (2022) |
Influence of heat-protective coatings on the temperature state of tractor diesel pistons |
 (Rus)
|
Belov V., Apelinsky D., Bezhenar V.
|
卷 16, 编号 1 (2022) |
The choice of design parameters of main and conrod bearings for passenger car engines |
 (Rus)
|
Zlenko M., Terenchenko A., Shibaev I.
|
1 - 20 的 20 信息 |
|