检索

期
标题
作者
卷 15, 编号 4 (2021)
Development of a complex of mathematical models of a vehicle suspension for fatigue life analysis
Kulagin V.
PDF
(Rus)
卷 17, 编号 1 (2023)
Towing couplers of a multi-sectional vehicle
Popov I.
PDF
(Rus)
卷 16, 编号 1 (2022)
Validation of the CAE model set for a passenger car suspension according to loading criteria
Kulagin V.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type
Vetrova E., Lebedev P., Adeev A.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Modeling of the device for balancing of a Li-Ion battery with switched capacitors for electric vehicles
Varlamov D.
PDF
(Rus)
卷 11, 编号 3 (2017)
Design of an independent vehicle suspension guide using the topological optimization method
Vdovin D., Prokopov V., Ryabov D.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
General propositions for the integration of power supply system in a multiplex communication system of a vehicle
Chernov A., Akimov A.
PDF
(Rus)
卷 8, 编号 3-2 (2014)
Fractal analysis of surface profile of machine parts using measuring device MarSurf XR20
Bavykin O., Plaksin S., Vycheslavova O.
PDF
(Rus)
卷 12, 编号 4 (2018)
Calculation and experimental analysis of the V-belt variator motor
Balovnev N., Dmitrieva L.
PDF
(Rus)
卷 8, 编号 3-5 (2014)
Economic feasibility of operating vehicles equipped with starter-generator device
Leiba S., Gasanbekov S.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Influence of friction in joints on the performance of tensioning device of continuous track
Bulbutenko S., Fedotkin R., Ovcharenko A., Beynenson V.
PDF
(Rus)
卷 9, 编号 2-4 (2015)
Preliminary tension as a way to reduce damage accumulation under cyclic loading
Artykh V., Korikhin N., Melnikov B., Semenov A., Raimberdiev T.
PDF
(Rus)
卷 6, 编号 1 (2012)
METHODS OF FUEL PRODUCTION FROM ORGANIC RAW MATERIALS BY PLASMA CONVERTERS
Shubin E., Martynov S., Eremin B., Nazarov A., Belopol A.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder
Vetrova E., Lebedev P., Adeyev A.
PDF
(Rus)
卷 9, 编号 3-4 (2015)
Analysis of Geared Turbofan Engine Transmission on Operational and Breakdown Overloads
Temis M., Egorov A.
PDF
(Rus)
卷 6, 编号 1 (2012)
PROCESSING OF VEGETABLE FATS INTO GASEOUS HYDROCARBON FUEL IN MULTICOMPONENT PLASMA CONVERTER
Nazarov A., Martynov S., Eremin B., Poturaev S., Andrukh O.
PDF
(Rus)
卷 7, 编号 1-4 (2013)
Increasing of antijamming ability in digital transmission systems
Lvov A., Svetlov M., Rudenko A., Martinov P.
PDF
(Rus)
卷 10, 编号 2 (2016)
The method of simulating the loading of boosted diesel engine during start-up at low ambient temperatures
Bondar V., Kukis V., Malozyomov A.
PDF
(Rus)
卷 2, 编号 2 (2008)
Spindle rotational speed limit at tightening
Shmagin A.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Optimization of combined cutting and surface plastic deformation
Pini B., Vetrova E., Maximov Y.
PDF
(Rus)
卷 12, 编号 1 (2018)
The electric starting systems of automobile internal combustion engines with alternative sources of current
Maleev R., Shmatkov Y., Kholodov A.
PDF
(Rus)
卷 2, 编号 2 (2008)
Passive-active Relative Orientation in Automatic Assembly
Peyeva I., Vitliemov V.
PDF
(Rus)
卷 8, 编号 1-1 (2014)
Improving the dynamic characteristics of the hydraulic drive when braking
Gurevich Y., Ivochkin M.
PDF
(Rus)
卷 12, 编号 3 (2018)
Comparison of the analytical solutionof efficieтcy regenerative rotating heatexchangethe device with resultsof numericalcalculations
Kalnitsky F., Kostyukov A.
PDF
(Rus)
1 - 25 的 25 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##