检索

标题
作者
The spark plug’s thermal state simulation
Yakhutl D., Maleev R., Zuev S., Shmatkov Y., Ryabykh E.
Calculation method for determining the heat loss of the air environment when opening the passenger vehicle cabin doors
Gevorkyan A., Prokhorov I., Butarovich D.
Results of application of porous permeable SHS catalytic blocks in multistage converters, diesel exhaust gases
Melbert A., Nguyen T., Mashensky A., Sokolova V.
Methods of fog control for a vehicle windscreen before vehicle moving off
Ignatiev V., Antoshina V.
The study of fuel accumulation in the oil of a gasoline engine with direct fuel injection
Krasnov V., Terenchenko A., Timofeev D., Shibaev I., Stepin N.
Method for determining the temperature fields of the spark plug
Yakhutl' D., Maleyev R., Zuyev S., Shmatkov Y., Ryabykh Y.
Operation modes of local water evaporative air cooler cabins of self-propelled vehicles with regard to individual operators and variability of temperature conditions
Mikhailov V., Dmitriev M., Ivobotenko B.
Influence of chromium on the properties of molded steel for hot deformation
Nitkin N., Zuev V.
The peculiarities of a stationary distribution of melt temperature of the polymer in extruder caused by heat transfer
Khametova M.
Influence of pressure and temperature on thermal conductivity of limestone
Ramazanova A., Magdiev A.
Ejector-type heat exchangers in the air conditioning in transport
Merkulov V., Popov A., Polikarpov A., Tishchenko I.
The Influence of Carbon on the Properties of Cast Steels with 3% Chromium
Nitkin N., Zuev V.
Influence of processing factors on the structure and properties of carbon steel powder obtained by sintering and hardening of electropulse nanoparticles
Panov V., Skorikov R., Eremeeva Z., Nitkin N., Sharipzjanova G., Zherdickaja N., Ivanov S.
Effect of tires air pressure on operation of vehicle. Reasons for changes in tires air pressure
Smirnov A., Kolbasov A., Monakhov V.
Reducing the emission of solid particles from the exhaust gases of the internal combustion engine by increasing the efficiency of the catalytic converter
Kukis V., Omel'chenko E.
Study method for structure forming of metal for data accessing for control of solidification of products, crystallizing in two-phase zone
Sulimtsev I.
Endurance testing of tractor friction clutches
Mikhaylov V., Sharipova N., Esenovsky-Lozhkov M.
Irrigated nozzles for air treatment in cabins of tractors and agricultural machinery
Mikhailov V., Sharipova N.
Optimization and debugging of a low-toxic combustion chamber with the use of numerical modeling of intrachamber processes
Gornovskiy A., Valeev A., Kosach L., Kostyukov A.
Extension of the Temperature Range of Automotive Electric Motors by Using the Permanent Magnet Excitation Component
Boriskin P.
Functional model for prediction of durability of rock handler tires
Goryunov S.
Wet purification of air from dust in innovative irrigated nozzle of regular structure for ventilation of cabins of wheeled and tracked vehicles
Mikhailov V., Sharipova N., Esenovskiy-Lashkov M.
Methodology for conducting climatic tests in cabins and habitable compartments of wheeled and tracked vehicles
Vereshchagin S.
The impact of stress on the culture of tissue Arabidopsis thaliana ininvitroconditions
Dolgikh Y., Sedov K.
Thermal effect at impact of a drop with a highly heated wall
Baranov D., Kazenin D., Skochilova Y., Trusov M.
The features of durability prediction of automotive clutches friction paddings
Esakov A., Ivobotenko B.
Forecasting of operating temperature of pneumatic tires of rock handler trucks
Goryunov S., Sharipov V.
Application of methods to predict the durability of friction pads for automobile clutch
Esakov A.
Investigation of operating temperature of dump trucks pneumatic tires
Goryunov S., Sharipov V., Kutkov G.
Dielectric relaxation and structural changes in aqueous solutions of tetromethyl carbamid
Lileev A., Lyaschenko A., Okhotnikova K.
New fields of application of regenerative cooling-gas machines
Porytchikov A., Krysanov K.
Designing compensators of thermal stress for modern aviation turboshaft engine by powder metallurgy methods
Isaeva E., Perevoin S., Isaev D.
Working substances of high heat pumps. Current state of affair and development trends
Malafeev I., Ilyin G., Krysanov K.
Improvement of design of water evaporative air coolers in tractor cabins
Mikhaylov V., Sharipova N., Dmitriev M.
1 - 34 的 34 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##