检索

期
标题
作者
卷 89, 编号 1 (2022)
Forecasting the resource of console-fixed parts during wear with account of permissible stresses
Mikhalchenkov A., Komogortsev V., Kozarez I., Dyachenko A., Mikhalchenkova M.
PDF
(Rus)
卷 88, 编号 6 (2021)
Prediction of cyclic durability and risk analysis of inconsistencies in the supporting structures of mobile vehicles
Panov A.
PDF
(Rus)
卷 80, 编号 2 (2013)
A method of characterization of resource distribution law of high-pressure fuel pump under bench tests using MathCAD software
Solomashkin A., Aleksandrov V.
卷 79, 编号 9 (2012)
A new technology of axial-piston hydraulic machines repair
Burumkulov F., Ionov P., Stolyarov A., Senin A.
卷 86, 编号 3 (2019)
Method of improving the service properties of the plowshare frame using abrasion-resistant surfacing materials and polymer composites
Mihal'chenkov A., Mihal'chenkova M., Petrakov M., Gucan A.
PDF
(Rus)
卷 79, 编号 10 (2012)
Ways to increase the durability of ГСТ-90 volumetric fluid power drive
Burumkulov F., Ionov P., Galin D., Zemskov A.
卷 82, 编号 6 (2015)
Evaluation of remaining operating life of oil depots equipment in agroindustrial complex by results of technical condition diagnostics
Yerofeyev V., Ignatyev A., Yerofeyev S., Sharafiyev R.
卷 79, 编号 4 (2012)
Restoration of spring teeth of agricultural machinery
Elkin S., Safonov V., Polupanov I.
卷 85, 编号 3 (2018)
Improvement of service properties of L53 steel with thermal strengthening
Mihal'chenkov A., Budko S., YUreva A.
PDF
(Rus)
卷 78, 编号 12 (2011)
Ways of increasing the reliability of grain combine harvesters in the network of dealer structures of Southern Federal District
Tsariov Y., Filobok S.
卷 83, 编号 10 (2016)
Increase of abrasive wear resistance of parts by means of variation of welding technique of double-layer coatings with hard surface
Kozarez I., Mikhal'chenkova M., Lavrov V., Sinyaya N.
PDF
(Rus)
卷 80, 编号 4 (2013)
Forecasting of service life and wear resistance of internal combustion engine
Kochenov V., Nikitin Y., Cheremokhina I., Chicherova T.
卷 78, 编号 6 (2011)
Standardization of tractors' reliability
Stopalov S., Zaytsev S., Streblechenko L.
卷 83, 编号 6 (2016)
Improvement of agricultural machines reliability by means of controlled tightening
Astakhov M., Nikishkina A.
PDF
(Rus)
卷 80, 编号 1 (2013)
Design procedure of the traction machine full-strength construction by projected service life
Khodes I., Shekhovtsov V., Sokolov-Dobrev N., Kosenko V., Klementyev Y., Godzhayev Z.
卷 77, 编号 11 (2010)
Forecasting the resource of combined seals for hydraulic cylinders
Borisov V., Kuznetsov V., Vodyakov V.
卷 83, 编号 8 (2016)
Mitigation of effect of compacted soil lump
Sidorov S., Khoroshenkov V., Mironov D., Luzhnova E.
PDF
(Rus)
卷 80, 编号 10 (2013)
Resistance to abrasive wear of renewed plow moldboards
Puchin Y., Kozhukhova N., Yakushenko N.
卷 77, 编号 4 (2010)
Improving the technologies of wear-resistant hard-facing for plough parts on the base of using the dip-transfer processes
Bulychiov V., Ponomariov A., Golubina S.
卷 82, 编号 11 (2015)
Influence of position of A-hoe blades of sowing machines on their wear
Solovyev S., Kozarez I., Feskov S.
卷 81, 编号 7 (2014)
Wear of all-metal and compound ploughshares
Mikhalchenkov A., Kozarez I., Mikhalchenkova M.
卷 76, 编号 11 (2009)
Air-cooled diesel's cylinder deformation
Belov Y., Gots A.
卷 82, 编号 12 (2015)
Technological efficiency of welding reinforcement of ploughshare point in tillage of heavy loam soils
Mikhalchenkov A., Tyureva A., Kozhukhova N., Orekhova G.
卷 81, 编号 8 (2014)
Modeling of loads in hydrostatic power drive joints
Senin P., Zemskov A., Stolyarov A., Ionov P.
卷 88, 编号 3 (2021)
V-belt transmissions of agricultural machines
Balovnev N., Brovkina Y., Dmitrieva L.
PDF
(Rus)
卷 76, 编号 8 (2009)
Increasing resource of active type sealing connections by modification of mounting places
Vodyakov V., Kuznetsov V., Berezin M., Borisov V.
卷 82, 编号 11 (2015)
Recuperative hydraulic booster of steering control of wheeled vehicle
Chmil V.
卷 82, 编号 3 (2015)
Point estimation of distribution parameters of overhaul period of imported hydraulic valves for agricultural machinery
Velichko S., Martynov A.
1 - 28 的 28 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##