期 |
标题 |
文件 |
卷 4, 编号 1 (2010) |
Information Component of Competitiveness Recovery of Russian Small and Medium Enterprises |
(Rus)
|
Rognova O., Igumnov V., Goncharova A.
|
卷 4, 编号 1 (2010) |
General Regularities of Complex Dynamic Systems Operation |
(Rus)
|
Platko A.
|
卷 4, 编号 1 (2010) |
Problems of Modernization of Russia: General Questions and Political Background |
(Rus)
|
Filyakin Y.
|
卷 4, 编号 1 (2010) |
The Issues of Industrial Cycles Modeling in the National Economy |
(Rus)
|
Katanaev N., Arkatova N., Larina E.
|
卷 4, 编号 1 (2010) |
Risk Management for Auto Enterprise Development Strategy |
(Rus)
|
Boyko U.
|
卷 4, 编号 1 (2010) |
Social Factors and Their Influence on Changes in Modern Economic Terminology |
(Rus)
|
Zaytseva T.
|
卷 4, 编号 1 (2010) |
Development of Personnel Potential of the Industry as the Factor of its Competitiveness |
(Rus)
|
Sorokina G.
|
卷 4, 编号 1 (2010) |
Problems and Prospects of Development of Economic Specialties in Technical Universities |
(Rus)
|
Alenina E., Zyulina V.
|
卷 4, 编号 1 (2010) |
The Content and Methods of Intercultural Competence Formation in Language Training of Economic Student |
(Rus)
|
Bagramyants N., Ivleva M.
|
卷 4, 编号 1 (2010) |
Speech Activity Improvement is an Important Factor for Professional Success |
(Rus)
|
Kovina T.
|
卷 4, 编号 1 (2010) |
Quantification of Technical and Tactical Skill of Athletes |
(Rus)
|
Morgunov Y., Patratyi R., Aleksandrov V.
|
卷 4, 编号 1 (2010) |
Experience of Using Multimedia in Teaching Engineering Disciplines |
(Rus)
|
Lukiyanov A., Zayceva T., Marinkin A.
|
卷 4, 编号 1 (2010) |
Innovative Technologies in Educational Process for Preparation of Engineering Students |
(Rus)
|
Zabenkina E., Artamonov I.
|
卷 4, 编号 1 (2010) |
Russian Language and Speech Standards as a Significant Component in Educational Program of Technical University |
(Rus)
|
Zmazneva O.
|
卷 3, 编号 2 (2009) |
Calculation of Static and Special Load on Undercarriage of Armoured Vehicles including Weld Joint Properties |
|
Kulakov H., Lyubin A.
|
卷 3, 编号 2 (2009) |
Adaptive Trailer Control System |
|
Abramov A.
|
卷 3, 编号 2 (2009) |
Damping of Torsional Vibrations of Transmission |
|
Tverskov B.
|
卷 3, 编号 2 (2009) |
Influence of Axial Adjustment Force in Universal Ball Joint on vibrational load of front-wheel drive vehicle power unit |
|
Prokopyev M., Naymushin E.
|
卷 3, 编号 2 (2009) |
Increase of effectiveness of two-shaft gas-turbine power units |
(Rus)
|
Kustarev Y., Kostyukov A., Plykin M.
|
卷 3, 编号 2 (2009) |
Mathematical Simulation of Automotive Pollution Spreading by Control Volume Method |
|
Gadelshin V., Lyubomischenko D., Sukhinov A.
|
卷 3, 编号 2 (2009) |
Simulation of multiaxle truck ride control |
(Rus)
|
Konchak V., Petko V., Kharitonchik S., Kolesnikovich A., Lazakovich S., Khitrikov S., Nikolaev Y.
|
卷 3, 编号 2 (2009) |
Piston Engine with Internal Recuperation of Exhaust Gases |
(Rus)
|
Gleizer A.
|
卷 3, 编号 2 (2009) |
Kinematics of Crank Gear with Two Crankshafts |
(Rus)
|
Grabovsky A.
|
卷 3, 编号 2 (2009) |
Theoretical and Practical Aspects of Tractor Speed Control Automation |
(Rus)
|
Shipilevsky G.
|
卷 3, 编号 2 (2009) |
Numerical modelling of the temperature fields in coolant jacket of internal combustion engine |
(Rus)
|
Zhilin A., Zharov A.
|
卷 3, 编号 2 (2009) |
Experimental investigations of ЯМЗ-236НЕ diesel engine operating on В20 mix and В100 pure biodiesel fuel |
(Rus)
|
Kutenev V., Kozlov A., Luksho V., Terenchenko A.
|
卷 3, 编号 2 (2009) |
Motor Transport Systems Sustainability Management Based on Safety and Effectiveness Criteria |
(Rus)
|
Komarov V., Narbut A.
|
卷 3, 编号 2 (2009) |
Fuel supply system with electrohydraulic effect |
(Rus)
|
Zayats Y., Golubev D., Strokov P.
|
卷 3, 编号 2 (2009) |
Discrete power alteration of internal combustion engines |
(Rus)
|
Grabovsky A., Averyanova E.
|
卷 3, 编号 2 (2009) |
Hydrostatic transmission application in automotive vehicles |
(Rus)
|
Kurmaev R., Petrov S.
|
卷 3, 编号 2 (2009) |
Integrated assessment of power distribution law influence on operating characteristics of allwheel drive vehicle |
(Rus)
|
Bakhmutov S., Gusakov D.
|
卷 3, 编号 2 (2009) |
Experience and prospect of development and approbation of combined machining of non-rigid shafts |
(Rus)
|
Ankin A., Adeev A.
|
卷 3, 编号 2 (2009) |
On the question of influence of geometrical perfection parameters of the surface of the workpiece |
(Rus)
|
Bekaev A., Kouznetsov V., Schedrin A., Skoromnov V.
|
卷 3, 编号 2 (2009) |
The determination of influence of applied lubricant on the physical-mechanical properties of bore surface layer |
(Rus)
|
Buylov E.
|
卷 3, 编号 2 (2009) |
Influence of a method of gear treatment on durability on a bend of teeth of cylindrical wheels of automobiles and tractors |
(Rus)
|
Vinogradov V., Cherepakhin A.
|
卷 3, 编号 2 (2009) |
Оscillations under cutting-deforming flexible shafts work |
(Rus)
|
Maximov Y., Ankin A.
|
卷 3, 编号 2 (2009) |
On the analysis of cutting process mechanics. Cutting with a flattened edge tool |
(Rus)
|
Olenin L.
|
卷 3, 编号 2 (2009) |
Characteristics of zones of ferro-admixture capture in magnetic cleaning units |
(Rus)
|
Sandulyak A., Palismakova M., Ershova V., Sandulyak A., Ershov D.
|
卷 3, 编号 2 (2009) |
Study method for structure forming of metal for data accessing for control of solidification of products, crystallizing in two-phase zone |
(Rus)
|
Sulimtsev I.
|
卷 3, 编号 2 (2009) |
Study of damping properties, thermal and strength characteristics of anaerobic materials |
(Rus)
|
Toulinov A., Goncharov A.
|
卷 3, 编号 2 (2009) |
Analysis of the kinematics and dynamics of balls during lapping by built-up tools |
(Rus)
|
Schetnikovich K.
|
卷 3, 编号 2 (2009) |
On the issue of interaction between the abrasive polymer brush's fiber and the treating surfaces |
(Rus)
|
Yakovlev D., Pini B.
|
卷 3, 编号 2 (2009) |
Dependence of cutting depth on sectional shape error during combined treatment of non-rigid parts of quill cylinder type |
(Rus)
|
Maximov Y., Ankin A., Vetrova E.
|
卷 3, 编号 2 (2009) |
Cutting parameters at needle-milling |
(Rus)
|
Voronov V., Sedykh M.
|
卷 3, 编号 2 (2009) |
Effectiveness increase of retrieval system by optimization of material flows at the production area of mechanical assembly production |
(Rus)
|
Gorskiy S.
|
卷 3, 编号 2 (2009) |
Effective designing of means of technological equipment by the automated preparation of machine-building manufacture |
(Rus)
|
Spirin D., Arkatova N.
|
卷 3, 编号 2 (2009) |
New method of solid centrifugal planetary machining |
(Rus)
|
Zverovschikov V., Zotov E.
|
卷 3, 编号 2 (2009) |
Regularization of ill-conditioned problems in geometrical measurements |
(Rus)
|
Souslin V., Dzhunkovskiy A.
|
卷 3, 编号 2 (2009) |
Ecological features of carbonate deposit removal from the surface of manufacturing equipment |
(Rus)
|
Artamonova I., Gorichev I.
|
卷 3, 编号 2 (2009) |
Program construction of stability range |
(Rus)
|
Morev B.
|
卷 3, 编号 2 (2009) |
The technique of construction of control system for biological sewage treatment technological process on the basis of hybrid neural networks |
(Rus)
|
Murachev E., Kholodov G., Solopova O.
|
卷 3, 编号 2 (2009) |
An incremental geometrically nonlinear finite element membrane model of sheet metal forming processes under action of rigid tools |
(Rus)
|
Sukhomlinov L., Petrov V.
|
卷 3, 编号 2 (2009) |
Inventory management at the machine-building enterprises from the position of logistics |
(Rus)
|
Ionov V., Makarenko S.
|
卷 3, 编号 2 (2009) |
Role and importance of financial information processing during managerial decision-making at the enterprise |
(Rus)
|
Panevina E.
|
卷 3, 编号 2 (2009) |
Development of automotive industry clusters as a factor of social-economic development of the region |
(Rus)
|
Sorokina G., Redin D.
|
卷 3, 编号 2 (2009) |
Universitetskoe obrazovanie. Istoricheskiy opyt i sovremennye podkhody |
(Rus)
|
Maksimovskikh L.
|
卷 3, 编号 2 (2009) |
On the opposition of two trends in Russian political and economical systems |
(Rus)
|
Filyakin Y.
|
卷 3, 编号 2 (2009) |
New instrument of competitive recovery of enterprises for present Russia |
(Rus)
|
Tsybulskaya E.
|
卷 3, 编号 2 (2009) |
Training of modern specialists in higher professional education |
(Rus)
|
Eremeeva L.
|
卷 3, 编号 2 (2009) |
On the issue of possibilities of educational process at the solution of applied problems |
(Rus)
|
Martishkin V., Prilepina N.
|
卷 3, 编号 2 (2009) |
Development the techniques of distance laboratory works on the example of programming C language |
(Rus)
|
Holodov G., Rozhkov A.
|
卷 3, 编号 1 (2009) |
Molecular Energy Storage Application in the Starting System of URAL-432031 Truck |
|
Antipenko V., Lebedev S.
|
卷 3, 编号 1 (2009) |
Oscillations of a Rotor of the Valve Traction Motor |
|
Berbirenkov I.
|
卷 3, 编号 1 (2009) |
Noise Reduction for Exhaust of the Piston Internal-combustion Engine with Coaxial Gas Outflow |
|
Vakhitov Y., Enikeev R.
|
卷 3, 编号 1 (2009) |
Analysis of the Effect of Restricted Stress-strain Adhesive Joint and Its Application in Bus Industry |
|
Voronkov O., Peskov V.
|
卷 3, 编号 1 (2009) |
Kolebaniya rulevogo upravleniya avtomobilya |
|
Emelyanov S.
|
卷 3, 编号 1 (2009) |
Body Design of a Tracked Carrier |
|
Ershov M., Lepeshkin I.
|
卷 3, 编号 1 (2009) |
Modern Antilock Brake Systems and Realization of Their Operation Algorithms |
|
Klimenko V., Ryzhikh L., Krasyuk A., Leontyev D.
|
卷 3, 编号 1 (2009) |
Relation between Tire Rate Value and Vehicle Operation Performance |
|
Kondrashov V., Voronin V., Karpukhin K.
|
卷 3, 编号 1 (2009) |
Clutch Load Determination on the Basis of Test Data |
|
Kretov A., Esakov A.
|
卷 3, 编号 1 (2009) |
Accuracy Enhancement for Vehicle Motion Mathematical Model on the Basis of Test Results |
|
Kurmaev R., Lepeshkin A.
|
卷 3, 编号 1 (2009) |
Mathematical Model of the Tire Cornering Coefficient for Wheeled Vehicles |
|
Mikhailin I.
|
卷 3, 编号 1 (2009) |
Automatic Control of Hybrid Transmission of an All-Wheel Drive Vehicle |
|
Prediger V., Hoffmann J., Trentmann V., Kostilev S., Lohmann E., Selifonov V., Karpukhin K., Baulina E.
|
卷 3, 编号 1 (2009) |
Approximation of Engine Part-load Curves |
|
Solomatin N., Zamorin A., Zotov E.
|
卷 3, 编号 1 (2009) |
Dependence of Vehicle Stopping Distance on Driver's Psychophysiologic Condition |
|
Tarabkin V., Akimov A.
|
卷 3, 编号 1 (2009) |
Application of Material Structuring Methods for Improvement of Vibroacoustic Properties of Panels, Laminated Gaskets in Passenger Cars |
|
Fesina M., Krasnov A.
|
卷 3, 编号 1 (2009) |
Selection of Method for Electronic Gear Control |
|
Shipilevsky G., Gorbachev A.
|
卷 3, 编号 1 (2009) |
Optimization of Transmission Control Laws for All-wheel Drive Vehicles with Individual Drive Per Wheel |
|
Bakhmutov S., Gusakov D.
|
卷 3, 编号 1 (2009) |
Dimensioning in Combined Cutting-deforming Machining with Axial Oscillations |
|
Ankin A., Adeev A.
|
卷 3, 编号 1 (2009) |
Electron Work Function of Refractory Metal Alloys |
|
Arzamasov V., Smirnova E., Stroev A., Polunov I., Rykov D.
|
卷 3, 编号 1 (2009) |
Mathematical Model of Physical Processes in Vibration-laden Screw-thread Joint |
|
Berezin S., Leonov V.
|
卷 3, 编号 1 (2009) |
Manufacturing of Round and Square Hot-rolled Bars of Nickel and Titanic Alloy on the Rolling Mill 280 - 380 |
|
Burlakov I.
|
卷 3, 编号 1 (2009) |
Cutting Method for Roll Material Decks by High-pressure Water-ice Flow |
|
Burnashov M.
|
卷 3, 编号 1 (2009) |
Determination of Optical Centers of Emission in a Plastic Scintillator Irradiated by UV-laser |
|
Volkova L., Borisova E., Nurmukhametov R.
|
卷 3, 编号 1 (2009) |
Improvement of Labor Protection in the Scientific-Production Association of Measurement Technique |
|
Grafkina M., Angelova M.
|
卷 3, 编号 1 (2009) |
Monitoring of Microarc Oxidation Process with Application of personal computer |
|
Zhukovsky A., Shandrov B.
|
卷 3, 编号 1 (2009) |
Vibration of the Cross-section of a Nonrigid Hollow Cylinder Unit under Combined Treatment by Cutting and Surface Plastic Deformation |
|
Maximov Y., Ankin A., Vetrova E.
|
卷 3, 编号 1 (2009) |
Determination Peculiarities of Static and Ddynamic Quality Index of Basic Parts |
|
Mihaylov V., Porhunov S.
|
卷 3, 编号 1 (2009) |
Statistical Analysis of Accuracy for Electrochemical Working of a Compressor Blade |
|
Morgunov Y., Benikov V., Saushkin S., Saushkin G.
|
卷 3, 编号 1 (2009) |
Organization of On-line Information Analysis in the System of Decision Making by Results of Factory Testing of Products |
|
Pervukhina E., Golikova V., Stepanchenko T.
|
卷 3, 编号 1 (2009) |
Innovative research and development based on of 3D parametric modeling technology |
|
Shpun'kin N., Petrov P., Strokov P., Gnevashev D., Nikitin M.
|
卷 3, 编号 1 (2009) |
Manufacturing Capabilities of Brushes with Abrasive Polymeric Fibres |
|
Pini B., Yakovlev D.
|
卷 3, 编号 1 (2009) |
Principles of Extruding Forging Die Design |
|
Ragulin A., Anukhin A., Filippov Y., Kononov A.
|
卷 3, 编号 1 (2009) |
Efficiency of Risk Reducing Measures (ferric impurity removal) for Safety Operation. Residual Risk. |
|
Sandulyak A.
|
卷 3, 编号 1 (2009) |
Ways of Energy Intensity Reducing for Hydrocutting of Sheet And Roll Nonmetallic Material |
|
Stepanischev M., Burnashov M.
|
卷 3, 编号 1 (2009) |
Application of Probabilistic Approach to Describe the Kinetic Curves of Dissolution And Leaching of Magnetite |
|
Artamonova I., Gorichev I., Izotov A., Pichugina N., Stepanov V.
|
卷 3, 编号 1 (2009) |
Basic Regularities of Electrochemical Behavior of Steel 10 in the Anodic Polarization in Sulfate And Carbonate Solutions at Different Ph Environments |
|
Artamonova I., Balashova O., Bratishko R., Zabenkina E., Lesnova L., Rusakova S.
|
卷 3, 编号 1 (2009) |
The Computerized Means for the Automation of Qualifying Operations Based on Labview Technology |
|
Sirotsky A., Murachev E., Dorokhov I.
|
卷 3, 编号 1 (2009) |
The Films with Low Dielectric Permittivity on the Basis of Lyotropic Liquid Crystals |
|
Sonin A.
|
卷 3, 编号 1 (2009) |
Role Play As a Means of Shaping the Social And Cultural Competence of Students-Economists in the Technical University |
|
Bagramyants M., Bagramyants N.
|
2101 - 2200 的 2404 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|