检索

期
标题
作者
卷 18, 编号 1 (2024)
Study of efficiency of the algorithm of acceleration and deceleration control of a wheeled vehicle by means of the accelerator pedal
Klimov A.
PDF
(Rus)
卷 17, 编号 3 (2023)
Algorithm for forming traction and braking torque settings at the shaft of a traction motor by means of a single pedal
Klimov A.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
Influence of parameters and conditions of rolling of elastic wheels on their power and kinematic characteristics
Balabina T., Balovnev N., Ivanov V., Chepurnoy S.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
General questions of interaction of an elastic wheel with rigid supporting surface
Abuzov V., Balabina T., Chepurnoy S.
PDF
(Rus)
卷 5, 编号 1 (2011)
Choice of the most rational circuit of a cold profile rolling of teeth
Buyanov S., Vinogradov V., Cherepakhin A.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Analytical method of estimating the results of interaction of elastic wheel with deformable bearing surface in the sustained straight rolling motion
Lepeshkin A., Petrov S.
PDF
(Rus)
卷 7, 编号 1-2 (2013)
Designing of gear roll forming tools for finishing of gear ring
Cherepakhin A., Vinogradov V.
PDF
(Rus)
卷 9, 编号 1-1 (2015)
The amplitude-frequency characteristics and transfer functions of electromechanical wheel drive mover of rolling type
Sergeev A.
PDF
(Rus)
卷 5, 编号 1 (2011)
Influence of a leading mode wheel rolling on formation of basic surface of movement
Sergeev A.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Self-excitation of oscillations of wheeled tractors frame when working in traction mode
Schetinin Y., Esenoskiy-Lashkov M., Sergeev A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Design a tool for hot rolled workpiece
Karpajtis E., Zolotuhin P., Volodin I.
PDF
(Rus)
卷 9, 编号 1-1 (2015)
Research of supporting off-road ability with front and rear wheels track mismatch
Ostretsov A., Sharipov V., Bernatsky V., Esakov A., Mordasov A.
PDF
(Rus)
卷 2, 编号 1 (2008)
Production of Disc Blanks GTDP on the Automated Line ALRD-800
Burlakov I.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
Analysis of kinematic and power parameters of rolling wheel propulsor
Sergeev A., Esakov A., Kruglov S., Cherniy I.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The technology of precision tubular products using compression on the profile mandrel rolling-drawing non-driven rollers
Rozov J.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Alignment of structure by thickness of steel strips at hot rolling
Aldunin A.
PDF
(Rus)
卷 2, 编号 1 (2008)
Propulsion of Logging Machines with Individual Electromechanical Wheel Drives of Rolling Over Type
Sergeev A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Development of CAD subsystem manufacturing processes of jewelry
Sidel'nikov S., Dovzhenko N., Gajlis J., Lebedeva O.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Resource-saving preparation of the structure and mechanical properties of steel 40X for cold die forging of hardware
Pachurin G., Filippov A., Chinenkov S.
PDF
(Rus)
卷 12, 编号 2 (2018)
Quasi-finite element model of rolling elastic wheels on uneven deformable substructure in nonlinear motion of a wheeled vehicle
Volskaja N., Zhileykin M., Zakharov A., Panshin M.
PDF
(Rus)
卷 2, 编号 2 (2008)
The Mathematics Model of Mechanism Forming the Spot Face of Rolling Wheel
Sergeev A., Cherny I.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
Determination of camber and toe angles ratio for elastic wheels, providing the lowest rolling resistance
Balabina T., Mamayev A., Chepurnoy S.
PDF
(Rus)
卷 8, 编号 2-2 (2014)
Optimization of combined cutting and surface plastic deformation
Pini B., Vetrova E., Maximov Y.
PDF
(Rus)
卷 1, 编号 2 (2007)
Mathematical Model of Rolling Elastic Wheel over Deformable Ground
Chistov M., Naumov A.
PDF
(Rus)
卷 8, 编号 2-1 (2014)
Influence of torque distribution between axles on off-road capability of KamAZ-4350, 5350 and 6350
Komarov V., Ostretsov A., Kondrashov V.
PDF
(Rus)
卷 3, 编号 1 (2009)
Manufacturing of Round and Square Hot-rolled Bars of Nickel and Titanic Alloy on the Rolling Mill 280 - 380
Burlakov I.
卷 7, 编号 1-2 (2013)
Advantages of using of a device for combined machining and surface plastic deformation with specified rolling force when machining of nonrigid parts such as a hollow cylinder
Vetrova E., Lebedev P., Adeyev A.
PDF
(Rus)
卷 8, 编号 3-2 (2014)
Study of stress-strain state of mill roller drive elements
Ivochkin M., Gurevich Y., Dimitryuk S.
PDF
(Rus)
卷 5, 编号 1 (2011)
Drill bit manufacturing quality assurance
Verzhansky A., Makhnenko A.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Theoretical analysis of plane motion of rolling wheel when forming of contact area
Sergeyev A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The relationship of elastic deformations of four-high system during formation of a profile and flatness of rolled strips
Belsky M., Mukhin Y.
PDF
(Rus)
卷 8, 编号 4-2 (2014)
Research of distribution of plastic deformation on thickness of steel strips
Aldunin A., Shumeev A.
PDF
(Rus)
1 - 32 的 32 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##