Issue |
Title |
File |
Vol 6, No 2-2 (2012) |
Sintered metal alloys for high-loaded contacts of ignition system of internal combustion engine |
(Rus)
|
Arzamasov V.B., Smirnova E.E., Rykov D.E., Ryabchik T.A.
|
Vol 6, No 2-2 (2012) |
Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive |
(Rus)
|
Bakharev V.P., Knutova E.E.
|
Vol 6, No 2-2 (2012) |
Used automotive catalysts as major sources of secondary precious metals |
(Rus)
|
Bobovich B.B., Savko A.P.
|
Vol 6, No 2-2 (2012) |
Integrated use of all secondary resources as the strategic goal of car utilization |
(Rus)
|
Bobovich B.B.
|
Vol 6, No 2-2 (2012) |
High precision machining of hardened steels using small-sized tools of cubic boron nitride |
(Rus)
|
Borovsky G.V., Neginsky E.A., Pini B.E., Khachikyan E.A.
|
Vol 6, No 2-2 (2012) |
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation |
(Rus)
|
Vetrova E.A.
|
Vol 6, No 2-2 (2012) |
Material prerequisites for the creation of machine-building products of new generation |
(Rus)
|
Volkov G.M.
|
Vol 6, No 2-2 (2012) |
Analysis of machinability of steel 75HGFC |
(Rus)
|
Volkov R.B., Golobkov A.V., Kuznetsov V.A., Cherepahin A.A.
|
Vol 6, No 2-2 (2012) |
Technique of definition the complexity of castings by design and technological parameters of a cast part |
(Rus)
|
Volkomovich A.A., Sorokin Y.A.
|
Vol 6, No 2-2 (2012) |
Primenenie fraktal'nogo analiza dlya opisaniya i otsenki stokhasticheski sformirovannykh poverkhnostey |
(Rus)
|
Vyacheslavova O.F., Bavykin O.B.
|
Vol 6, No 2-2 (2012) |
Features of mechanical treatment of parts of ceramic materials |
(Rus)
|
Gorelov V.A., Alekseev S.V.
|
Vol 6, No 2-2 (2012) |
Technology of processing of complex shape products (on the example of gas-turbine engine mono-wheel blades) |
(Rus)
|
Gorelov V.A., Arshiniv S.V., Maximov Y.V., Pini B.E., Bekaev A.A., Merzlikin V.G., Vtorova A.Y.
|
Vol 6, No 2-2 (2012) |
Electromagnetic field of the hybrid car |
(Rus)
|
Grafkina M.V., Niunin B.N., Teryaeva E.P.
|
Vol 6, No 2-2 (2012) |
Influence of the mode parameters on the technological characteristics of the injector hole broaching operation |
(Rus)
|
Belov I.I., Gruzdev A.A., Saushkin B.P.
|
Vol 6, No 2-2 (2012) |
Models for calculation of thermal displacements of spindle assemblies |
(Rus)
|
Ivannikov S.N., Manaenkov I.V.
|
Vol 6, No 2-2 (2012) |
Analysis of multilayer material producing and prospects of using of nonequal-thick sheet material |
(Rus)
|
Kolesov A.V.
|
Vol 6, No 2-2 (2012) |
Application of laser welding technology in manufacture of pressure vessels of titanium alloy |
(Rus)
|
Kochergin S.A., Saushkin B.P.
|
Vol 6, No 2-2 (2012) |
Determination of metals plasticity by combined cross-extrusion and upset |
(Rus)
|
Krutina E.V., Kalpin Y.G.
|
Vol 6, No 2-2 (2012) |
Calculation and optimization of the welded frame for unique machine-tools |
(Rus)
|
Maksimov Y.V., Porkhunov S.G., Kuzminskiy D.L.
|
Vol 6, No 2-2 (2012) |
Theoretical studies of dependence of geometric parameters of a contact between a tool and a workpiece on installation of a tool in the process of burnishing |
(Rus)
|
Kuznetsov A.V., Vasiliev V.A., Bezhenar E.N., Zabolotnaya I.V., Sazonov D.A., Smirnov A.V.
|
Vol 6, No 2-2 (2012) |
Forming processes when machining of a solid of revolution by external broach |
(Rus)
|
Kuznetsov V.A., Yushin D.I., Khomyakova N.V., Krivonos R.A.
|
Vol 6, No 2-2 (2012) |
Designing of the technological process for manufacturing of parts based on technical and economic modeling |
(Rus)
|
Kuznetsov V.A., Vladyka A.A., Tsitrikov A.V., Zakharova O.Z.
|
Vol 6, No 2-2 (2012) |
Venture companies in modern mechanical engineering production |
(Rus)
|
Kuznetsov P.M.
|
Vol 6, No 2-2 (2012) |
Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production |
(Rus)
|
Lukina S.V., Krutyakova M.V., Solovieva N.S., Girko V.V.
|
Vol 6, No 2-2 (2012) |
Efficiency improvement of multi-axis milling of complex surfaces on CNC machines |
(Rus)
|
Lukina S.V., Mamayenkov I.V.
|
Vol 6, No 2-2 (2012) |
Precision of machining on CNC machines |
(Rus)
|
Maksimov Y.V., Bekayev A.A., Nadolskiy M.A., Prokhorov A.V.
|
Vol 6, No 2-2 (2012) |
Key problems of manufacturing of solid hard-alloyed end tools on CNC machines |
(Rus)
|
Maksimov Y.V., Yemelianov P.I.
|
Vol 6, No 2-2 (2012) |
Importance of simplicial sets in quality management of technical products |
(Rus)
|
Martishkin V.V., Fazlulin E.M.
|
Vol 6, No 2-2 (2012) |
Estimation of CNC machine error influence on precision of machining of surfaces of the body of tool holder for replaceable inserts |
(Rus)
|
Nadolskiy M.A.
|
Vol 6, No 2-2 (2012) |
The current state and prospects of ultrasonic dimensional processing in mechanical engineering |
(Rus)
|
Morgunov Y.A., Opalnitskiy A.I., Perepechkin A.A.
|
Vol 6, No 2-2 (2012) |
Modern methods of hollow metal microsphere manufacture |
(Rus)
|
Petrov M.A., Bast Y.L., Petrov P.A., Sheypak A.A.
|
Vol 6, No 2-2 (2012) |
Application of an axisymmetric rigid-plastic finite element membrane model for evaluation of friction coefficients in sheet metal forming processes |
(Rus)
|
Petrov V.K., Mikhaylova V.L., Sukhomlinov L.G.
|
Vol 6, No 2-2 (2012) |
Reliability estimation of lathes with CNC by the accuracy of processing |
(Rus)
|
Avdeev V.B.
|
Vol 6, No 2-2 (2012) |
Increase of productivity of processing the pneumo - and hydraulic cylinders by enhancement of the device for combined machining and surface plastic deformation |
(Rus)
|
Pini B.E., Maximov Y.V., Ankin A.V., Adeev A.S.
|
Vol 6, No 2-2 (2012) |
Enhanced operating characteristics of the scanning magnet controlled ferroimpurities of molding compounds |
(Rus)
|
Sanduliak A.V., Sanduliak A.A., Kurenkov E.P., Sanduliak D.A., Golovanov A.V.
|
Vol 6, No 2-2 (2012) |
Aspects of ensuring of reliability of crankshaft bearings |
(Rus)
|
Belokon K.G., Nikishin V.N., Sibiriakov S.V.
|
Vol 6, No 2-2 (2012) |
Increasing of cutting efficiency of heat-treated steel through the application of cutting tools of high-strength composite ceramic with coating E. S. Sotova, M. N. Lazareva |
(Rus)
|
Sotova E.S., Lazareva M.N.
|
Vol 6, No 2-2 (2012) |
Virtual coordinate-measuring machine |
(Rus)
|
Suslin V.P., Dzhunkovsky A.V., Popovkin A.V., Holodov D.A.
|
Vol 6, No 2-2 (2012) |
Overview of the multi-layer sheet deformable materials for protection against noise |
(Rus)
|
Tipalin ..S., Saprykin B.Y., Shpunkin N.F.
|
Vol 6, No 2-2 (2012) |
Research of hardened galvanized sheet bending |
(Rus)
|
Tipalin S.A.
|
Vol 6, No 2-2 (2012) |
Localized bending and twisting of the galvanized strip during formation of channel |
(Rus)
|
Tipalin S.A.
|
Vol 6, No 2-2 (2012) |
Experimental investigation of the process of extrusion of a technological groove in a galvanized strip |
(Rus)
|
Tipalin S.A.
|
Vol 6, No 2-2 (2012) |
Mechanical processing with activated air |
(Rus)
|
Chekalova E.A., Chekalov P.D.
|
Vol 6, No 2-2 (2012) |
New technology of processing of cutting tool by use of activated air |
(Rus)
|
Chekalova E.A.
|
Vol 6, No 2-2 (2012) |
Fractal multidimensional scale for controlling of the mode of dimensional electrochemical machining and evaluation of its output data |
(Rus)
|
Bavykin O.B.
|
Vol 6, No 2-2 (2012) |
Nanodisperse multi-layered composite coatings for cutting tools |
(Rus)
|
Maximov Y.V., Bublikov Y.I., Vereschaka A.A., Vereschaka A.S., Haustova O.Y., Kozlov A.A., Hodziev O.
|
Vol 6, No 2-2 (2012) |
Highly effective layered tool materials with nano-dispersed multi-layered of wide range of applications |
(Rus)
|
Maximov Y.V., Vereschaga A.S., Vereschaga A.A., Bublikov Y.I., Kryuchkov K.V., Kozlov A.A.
|
Vol 6, No 2-2 (2012) |
Criteria of processing operations optimization of gear-producing based on various methods of tooth formation |
(Rus)
|
Vinogradov V.M., Cherepahin A.A.
|
Vol 6, No 2-2 (2012) |
Prospects of development and application of physico-chemical methods and technologies in engines manufacture |
(Rus)
|
Shandrov B.V., Morgunov Y.A., Saushkin B.P.
|
Vol 6, No 2-2 (2012) |
Status and opportunities for development of some gear cutting technologies and equipment |
(Rus)
|
Shvychkov D.V.
|
Vol 6, No 2-2 (2012) |
Identification of the most significant areas of parameters estimation in development of the criterial approach for the selection of measurements means in designing and modernization of technological processes |
(Rus)
|
Shtunder A.L.
|
Vol 6, No 2-2 (2012) |
Analysis of measuring errors and an object in determining residual stresses |
(Rus)
|
Yakovlev M.G.
|
Vol 6, No 2-2 (2012) |
Method of chemical reactions rate detection in the processes of neutralization of exhaust gases |
(Rus)
|
Samuel B.S.
|
Vol 6, No 2-2 (2012) |
Possibility for finding of a common solution for Navier-Stokes equations |
(Rus)
|
Vyskrebtsov V.G.
|
Vol 6, No 2-2 (2012) |
Radiospectroscopy of magnetic materials |
(Rus)
|
Kozlov V.I.
|
Vol 6, No 2-2 (2012) |
Observability in problems of mathematical physics |
(Rus)
|
Korneichuk L.G., Vyskrebtsov V.G.
|
Vol 6, No 2-2 (2012) |
Approximate model of forecasting resource during the impact of non-Gaussian processes |
(Rus)
|
Podvoisky A.O., Borovskih V.E.
|
Vol 6, No 2-2 (2012) |
Numerical solution for the stress concentration problem for the case of a three-layered elastic plane with the two identical vertically placed circular holes under transverse compression |
(Rus)
|
Mikhaylova V.L., Sukhomlinov L.G., Mazin V.A.
|
Vol 6, No 2-2 (2012) |
Analysis and synthesis of robust control for linear systems of double damping |
(Rus)
|
Trindyuk V.A., Kiyko G.I.
|
Vol 6, No 2-2 (2012) |
Dynamic robust stabilization problem for the linear nonstationary systems |
(Rus)
|
Trindyuk V.A., Kiyko G.I.
|
Vol 6, No 2-2 (2012) |
The conclusion of the Dirac matrices in the real, complex and quaternionic representations |
(Rus)
|
Ketsaris A.A.
|
Vol 6, No 2-2 (2012) |
Basic experiment and method for identifying of material functions of elastic-plastic deformation theory |
(Rus)
|
Bondar V.S., Prolubnikova A.A.
|
Vol 6, No 2-2 (2012) |
The problem of spreading of the plastic layer consisting of different environments |
(Rus)
|
Kadymov V.A.
|
Vol 6, No 2-2 (2012) |
Multicriteria optimal design turbomachine disk |
(Rus)
|
Temis Y.M., Yakushev D.A.
|
Vol 6, No 2-2 (2012) |
Generalized method of supplementary strain in the problems of beam torsion |
(Rus)
|
Temis Y.M., Lazarev A.A., Malanova O.L.
|
Vol 6, No 2-2 (2012) |
Approximation of plasticity functionals of elastic-plastic processes theory in non-isothermal loading under creep conditions |
(Rus)
|
Bondar V.S., Danshin V.V., Kostin A.I.
|
Vol 6, No 2-1 (2012) |
Turbo fan for intercooling system of transport turbodiesel engine |
(Rus)
|
Andreenkov A.A.
|
Vol 6, No 2-1 (2012) |
Mathematical description and optimization of performance of transmission and brake control in problems of optimal vehicle engineering |
(Rus)
|
Akhmedov A.A., Bakhmutov S.V.
|
Vol 6, No 2-1 (2012) |
Test-bench for tractive ability and efficiency tests of belt drives |
(Rus)
|
Balovnev N.P., Dmitrieva L.A., Semin I.N.
|
Vol 6, No 2-1 (2012) |
Experimental estimate of tractive ability of belt drives with different methods of belt tensioning |
(Rus)
|
Balovnev N.P., Dmitrieva L.A., Semin I.N.
|
Vol 6, No 2-1 (2012) |
Study of stability and controllability of hybrid car with variable-in-motion drive |
(Rus)
|
Baulina E.E., Dementyev Y.V., Iturralde P., Kislov A.A.
|
Vol 6, No 2-1 (2012) |
Prospects medium-tonnage urban commercial vehicles with hybrid power plant with Russian-made tractive electrical equipment |
(Rus)
|
Bakhmutov S.V., Serebryakov V.V., Baulina E.E., Kulikov A.I., Filonov A.I.
|
Vol 6, No 2-1 (2012) |
Method of forecasting of fatigue durability in the conditions of quasimonotonous degradation of physico-mechanical properties of an object |
(Rus)
|
Borovskikh V.E., Podvoyskiy A.O.
|
Vol 6, No 2-1 (2012) |
Modeling of the device for balancing of a Li-Ion battery with switched capacitors for electric vehicles |
(Rus)
|
Varlamov D.O.
|
Vol 6, No 2-1 (2012) |
Approximate method for calculating of internal combustion engine intake noise |
(Rus)
|
Vakhitov Y.R., Zagayko S.A.
|
Vol 6, No 2-1 (2012) |
Methods of selecting the rational combination of materials for sandwich panels of a bus body |
(Rus)
|
Voronkov O.V., Peskov V.I.
|
Vol 6, No 2-1 (2012) |
Kinetostatical analysis of a lifting mechanism |
(Rus)
|
Gebel E.S., Zhursenbaev B.I., Sarbasov A.T.
|
Vol 6, No 2-1 (2012) |
Complex automation of petrol stations |
(Rus)
|
Golovkova E.O., Sofiev A.E.
|
Vol 6, No 2-1 (2012) |
Piecewise continuous regulation of a tractor speed |
(Rus)
|
Gorodetskiy K.I., Bannikov M.V., Ivkova G.B., Muratova S.K., Shuvaev D.N.
|
Vol 6, No 2-1 (2012) |
Forecasting of operating temperature of pneumatic tires of rock handler trucks |
(Rus)
|
Goryunov S.V., Sharipov V.M.
|
Vol 6, No 2-1 (2012) |
Numerical and experimental investigation of braking performance of a bus |
(Rus)
|
Groshev A.M., Konikova G.A., Kostin S.Y., Trusov Y.P., Tumasov A.V.
|
Vol 6, No 2-1 (2012) |
Analysis of the design of the automotive generator of reciprocating type |
(Rus)
|
Dukhanina V.I., Ketsaris A.A.
|
Vol 6, No 2-1 (2012) |
Analysis of the workflow of linear generator of reciprocating motion type |
(Rus)
|
Dukhanin V.I., Ketsaris A.A.
|
Vol 6, No 2-1 (2012) |
Selection of a rational layout in the compact urban vehicle design |
(Rus)
|
Ivshin K.S., Polozov A.V.
|
Vol 6, No 2-1 (2012) |
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle |
(Rus)
|
Kamennyy A.V., Kostyukov A.V., Makarov A.R., Pustyntsev M.E.
|
Vol 6, No 2-1 (2012) |
Development of a system of two-stage turbocharging for KAMAZ EURO-5 engines |
(Rus)
|
Kaminskiy V.N., Grigorov I.N., Kaminskiy R.V., Sibiryakov S.V., Kuchev S.M., Likhachev V.N.
|
Vol 6, No 2-1 (2012) |
Development and production of turbochargers and other engine components and systems using information technologies |
(Rus)
|
Kaminskiy V.N., Kaminskiy R.V., Gusak A.A., Sibiryakov S.V., Korneev S.A., Kovaltsov I.V., Sergeev A.S., Ishchenko N.V., Olisova T.A.
|
Vol 6, No 2-1 (2012) |
Development of test-benches for control and research tests of turbochargers |
(Rus)
|
Kaminskiy V.N., Kaminskiy R.V., Lazarev A.V., Grigorov I.N., Kostyukov A.V., Korneev S.A., Kovaltsov I.V., Sergeev A.S., Gusak A.A., Sibiryakov S.V.
|
Vol 6, No 2-1 (2012) |
Turbo-electric compressor: potential, design and prospects |
(Rus)
|
Kaminskiy V.N., Lazarev A.V., Kaminskiy R.V., Sibiryakov S.V.
|
Vol 6, No 2-1 (2012) |
Information search for identifying of the trends in the motor engineering development for a specific region (Kazakhstan) |
(Rus)
|
Kim V.V., Kaminskiy V.N.
|
Vol 6, No 2-1 (2012) |
Application of active wheel modules in articulated trucks for transportation of oversized and heavy cargo |
(Rus)
|
Korkin S.N., Kurmaev R.K., Kramer A.S.
|
Vol 6, No 2-1 (2012) |
Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger |
(Rus)
|
Alexeev R.A., Kostyukov A.V.
|
Vol 6, No 2-1 (2012) |
Investigation of combustion modes of energy-accumulating materials |
(Rus)
|
Kostykov A.V., Kuznetsov V.V., Ashcheulnikov E.K., Rodkin K.P.
|
Vol 6, No 2-1 (2012) |
Microturbine with efficiency of over 43% |
(Rus)
|
Kostykov A.V.
|
Vol 6, No 2-1 (2012) |
The comparative evalution of the vibration damping characteristics of materials for modification of an oil pan and valve covers of an engine |
(Rus)
|
Kruglov K.M., Sherbakov V.I.
|
Vol 6, No 2-1 (2012) |
Development of a mathematical model of an energy-absorbing seat, using the results of piling tests |
(Rus)
|
Kulakov N.A., Gavrilov E.V.
|
Vol 6, No 2-1 (2012) |
Evaluation of explosive impact of mines on structures and crews of armored vehicles. Damaging Effects. Methods of protection |
(Rus)
|
Kulakov N.A., Shevchenko A.A.
|
Vol 6, No 2-1 (2012) |
Numerical and experimental stufy of composite ceramic armor resistance when exposed to high-speed bullets and fragments |
(Rus)
|
Kulakov N.A., Lyubin A.N., Skakbaeva A.S.
|
Vol 6, No 2-1 (2012) |
Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain |
(Rus)
|
Kulikov I.A.
|
Vol 6, No 2-1 (2012) |
Methods of creating an "intelligent" automatic adaptive transmission control multidrive wheeled vehicle |
(Rus)
|
Lepeshkin A.V.
|
1701 - 1800 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|