期 |
标题 |
文件 |
卷 6, 编号 2-2 (2012) |
Sintered metal alloys for high-loaded contacts of ignition system of internal combustion engine |
![PDF](/img/labels/pdf.png) (Rus)
|
Arzamasov V., Smirnova E., Rykov D., Ryabchik T.
|
卷 6, 编号 2-2 (2012) |
Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive |
![PDF](/img/labels/pdf.png) (Rus)
|
Bakharev V., Knutova E.
|
卷 6, 编号 2-2 (2012) |
Used automotive catalysts as major sources of secondary precious metals |
![PDF](/img/labels/pdf.png) (Rus)
|
Bobovich B., Savko A.
|
卷 6, 编号 2-2 (2012) |
Integrated use of all secondary resources as the strategic goal of car utilization |
![PDF](/img/labels/pdf.png) (Rus)
|
Bobovich B.
|
卷 6, 编号 2-2 (2012) |
High precision machining of hardened steels using small-sized tools of cubic boron nitride |
![PDF](/img/labels/pdf.png) (Rus)
|
Borovsky G., Neginsky E., Pini B., Khachikyan E.
|
卷 6, 编号 2-2 (2012) |
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation |
![PDF](/img/labels/pdf.png) (Rus)
|
Vetrova E.
|
卷 6, 编号 2-2 (2012) |
Material prerequisites for the creation of machine-building products of new generation |
![PDF](/img/labels/pdf.png) (Rus)
|
Volkov G.
|
卷 6, 编号 2-2 (2012) |
Analysis of machinability of steel 75HGFC |
![PDF](/img/labels/pdf.png) (Rus)
|
Volkov R., Golobkov A., Kuznetsov V., Cherepahin A.
|
卷 6, 编号 2-2 (2012) |
Technique of definition the complexity of castings by design and technological parameters of a cast part |
![PDF](/img/labels/pdf.png) (Rus)
|
Volkomovich A., Sorokin Y.
|
卷 6, 编号 2-2 (2012) |
Primenenie fraktal'nogo analiza dlya opisaniya i otsenki stokhasticheski sformirovannykh poverkhnostey |
![PDF](/img/labels/pdf.png) (Rus)
|
Vyacheslavova O., Bavykin O.
|
卷 6, 编号 2-2 (2012) |
Features of mechanical treatment of parts of ceramic materials |
![PDF](/img/labels/pdf.png) (Rus)
|
Gorelov V., Alekseev S.
|
卷 6, 编号 2-2 (2012) |
Technology of processing of complex shape products (on the example of gas-turbine engine mono-wheel blades) |
![PDF](/img/labels/pdf.png) (Rus)
|
Gorelov V., Arshiniv S., Maximov Y., Pini B., Bekaev A., Merzlikin V., Vtorova A.
|
卷 6, 编号 2-2 (2012) |
Electromagnetic field of the hybrid car |
![PDF](/img/labels/pdf.png) (Rus)
|
Grafkina M., Niunin B., Teryaeva E.
|
卷 6, 编号 2-2 (2012) |
Influence of the mode parameters on the technological characteristics of the injector hole broaching operation |
![PDF](/img/labels/pdf.png) (Rus)
|
Belov I., Gruzdev A., Saushkin B.
|
卷 6, 编号 2-2 (2012) |
Models for calculation of thermal displacements of spindle assemblies |
![PDF](/img/labels/pdf.png) (Rus)
|
Ivannikov S., Manaenkov I.
|
卷 6, 编号 2-2 (2012) |
Analysis of multilayer material producing and prospects of using of nonequal-thick sheet material |
![PDF](/img/labels/pdf.png) (Rus)
|
Kolesov A.
|
卷 6, 编号 2-2 (2012) |
Application of laser welding technology in manufacture of pressure vessels of titanium alloy |
![PDF](/img/labels/pdf.png) (Rus)
|
Kochergin S., Saushkin B.
|
卷 6, 编号 2-2 (2012) |
Determination of metals plasticity by combined cross-extrusion and upset |
![PDF](/img/labels/pdf.png) (Rus)
|
Krutina E., Kalpin Y.
|
卷 6, 编号 2-2 (2012) |
Calculation and optimization of the welded frame for unique machine-tools |
![PDF](/img/labels/pdf.png) (Rus)
|
Maksimov Y., Porkhunov S., Kuzminskiy D.
|
卷 6, 编号 2-2 (2012) |
Theoretical studies of dependence of geometric parameters of a contact between a tool and a workpiece on installation of a tool in the process of burnishing |
![PDF](/img/labels/pdf.png) (Rus)
|
Kuznetsov A., Vasiliev V., Bezhenar E., Zabolotnaya I., Sazonov D., Smirnov A.
|
卷 6, 编号 2-2 (2012) |
Forming processes when machining of a solid of revolution by external broach |
![PDF](/img/labels/pdf.png) (Rus)
|
Kuznetsov V., Yushin D., Khomyakova N., Krivonos R.
|
卷 6, 编号 2-2 (2012) |
Designing of the technological process for manufacturing of parts based on technical and economic modeling |
![PDF](/img/labels/pdf.png) (Rus)
|
Kuznetsov V., Vladyka A., Tsitrikov A., Zakharova O.
|
卷 6, 编号 2-2 (2012) |
Venture companies in modern mechanical engineering production |
![PDF](/img/labels/pdf.png) (Rus)
|
Kuznetsov P.
|
卷 6, 编号 2-2 (2012) |
Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production |
![PDF](/img/labels/pdf.png) (Rus)
|
Lukina S., Krutyakova M., Solovieva N., Girko V.
|
卷 6, 编号 2-2 (2012) |
Efficiency improvement of multi-axis milling of complex surfaces on CNC machines |
![PDF](/img/labels/pdf.png) (Rus)
|
Lukina S., Mamayenkov I.
|
卷 6, 编号 2-2 (2012) |
Precision of machining on CNC machines |
![PDF](/img/labels/pdf.png) (Rus)
|
Maksimov Y., Bekayev A., Nadolskiy M., Prokhorov A.
|
卷 6, 编号 2-2 (2012) |
Key problems of manufacturing of solid hard-alloyed end tools on CNC machines |
![PDF](/img/labels/pdf.png) (Rus)
|
Maksimov Y., Yemelianov P.
|
卷 6, 编号 2-2 (2012) |
Importance of simplicial sets in quality management of technical products |
![PDF](/img/labels/pdf.png) (Rus)
|
Martishkin V., Fazlulin E.
|
卷 6, 编号 2-2 (2012) |
Estimation of CNC machine error influence on precision of machining of surfaces of the body of tool holder for replaceable inserts |
![PDF](/img/labels/pdf.png) (Rus)
|
Nadolskiy M.
|
卷 6, 编号 2-2 (2012) |
The current state and prospects of ultrasonic dimensional processing in mechanical engineering |
![PDF](/img/labels/pdf.png) (Rus)
|
Morgunov Y., Opalnitskiy A., Perepechkin A.
|
卷 6, 编号 2-2 (2012) |
Modern methods of hollow metal microsphere manufacture |
![PDF](/img/labels/pdf.png) (Rus)
|
Petrov M., Bast Y., Petrov P., Sheypak A.
|
卷 6, 编号 2-2 (2012) |
Application of an axisymmetric rigid-plastic finite element membrane model for evaluation of friction coefficients in sheet metal forming processes |
![PDF](/img/labels/pdf.png) (Rus)
|
Petrov V., Mikhaylova V., Sukhomlinov L.
|
卷 6, 编号 2-2 (2012) |
Reliability estimation of lathes with CNC by the accuracy of processing |
![PDF](/img/labels/pdf.png) (Rus)
|
Avdeev V.
|
卷 6, 编号 2-2 (2012) |
Increase of productivity of processing the pneumo - and hydraulic cylinders by enhancement of the device for combined machining and surface plastic deformation |
![PDF](/img/labels/pdf.png) (Rus)
|
Pini B., Maximov Y., Ankin A., Adeev A.
|
卷 6, 编号 2-2 (2012) |
Enhanced operating characteristics of the scanning magnet controlled ferroimpurities of molding compounds |
![PDF](/img/labels/pdf.png) (Rus)
|
Sanduliak A., Sanduliak A., Kurenkov E., Sanduliak D., Golovanov A.
|
卷 6, 编号 2-2 (2012) |
Aspects of ensuring of reliability of crankshaft bearings |
![PDF](/img/labels/pdf.png) (Rus)
|
Belokon K., Nikishin V., Sibiriakov S.
|
卷 6, 编号 2-2 (2012) |
Increasing of cutting efficiency of heat-treated steel through the application of cutting tools of high-strength composite ceramic with coating E. S. Sotova, M. N. Lazareva |
![PDF](/img/labels/pdf.png) (Rus)
|
Sotova E., Lazareva M.
|
卷 6, 编号 2-2 (2012) |
Virtual coordinate-measuring machine |
![PDF](/img/labels/pdf.png) (Rus)
|
Suslin V., Dzhunkovsky A., Popovkin A., Holodov D.
|
卷 6, 编号 2-2 (2012) |
Overview of the multi-layer sheet deformable materials for protection against noise |
![PDF](/img/labels/pdf.png) (Rus)
|
Tipalin .., Saprykin B., Shpunkin N.
|
卷 6, 编号 2-2 (2012) |
Research of hardened galvanized sheet bending |
![PDF](/img/labels/pdf.png) (Rus)
|
Tipalin S.
|
卷 6, 编号 2-2 (2012) |
Localized bending and twisting of the galvanized strip during formation of channel |
![PDF](/img/labels/pdf.png) (Rus)
|
Tipalin S.
|
卷 6, 编号 2-2 (2012) |
Experimental investigation of the process of extrusion of a technological groove in a galvanized strip |
![PDF](/img/labels/pdf.png) (Rus)
|
Tipalin S.
|
卷 6, 编号 2-2 (2012) |
Mechanical processing with activated air |
![PDF](/img/labels/pdf.png) (Rus)
|
Chekalova E., Chekalov P.
|
卷 6, 编号 2-2 (2012) |
New technology of processing of cutting tool by use of activated air |
![PDF](/img/labels/pdf.png) (Rus)
|
Chekalova E.
|
卷 6, 编号 2-2 (2012) |
Fractal multidimensional scale for controlling of the mode of dimensional electrochemical machining and evaluation of its output data |
![PDF](/img/labels/pdf.png) (Rus)
|
Bavykin O.
|
卷 6, 编号 2-2 (2012) |
Nanodisperse multi-layered composite coatings for cutting tools |
![PDF](/img/labels/pdf.png) (Rus)
|
Maximov Y., Bublikov Y., Vereschaka A., Vereschaka A., Haustova O., Kozlov A., Hodziev O.
|
卷 6, 编号 2-2 (2012) |
Highly effective layered tool materials with nano-dispersed multi-layered of wide range of applications |
![PDF](/img/labels/pdf.png) (Rus)
|
Maximov Y., Vereschaga A., Vereschaga A., Bublikov Y., Kryuchkov K., Kozlov A.
|
卷 6, 编号 2-2 (2012) |
Criteria of processing operations optimization of gear-producing based on various methods of tooth formation |
![PDF](/img/labels/pdf.png) (Rus)
|
Vinogradov V., Cherepahin A.
|
卷 6, 编号 2-2 (2012) |
Prospects of development and application of physico-chemical methods and technologies in engines manufacture |
![PDF](/img/labels/pdf.png) (Rus)
|
Shandrov B., Morgunov Y., Saushkin B.
|
卷 6, 编号 2-2 (2012) |
Status and opportunities for development of some gear cutting technologies and equipment |
![PDF](/img/labels/pdf.png) (Rus)
|
Shvychkov D.
|
卷 6, 编号 2-2 (2012) |
Identification of the most significant areas of parameters estimation in development of the criterial approach for the selection of measurements means in designing and modernization of technological processes |
![PDF](/img/labels/pdf.png) (Rus)
|
Shtunder A.
|
卷 6, 编号 2-2 (2012) |
Analysis of measuring errors and an object in determining residual stresses |
![PDF](/img/labels/pdf.png) (Rus)
|
Yakovlev M.
|
卷 6, 编号 2-2 (2012) |
Method of chemical reactions rate detection in the processes of neutralization of exhaust gases |
![PDF](/img/labels/pdf.png) (Rus)
|
Samuel B.
|
卷 6, 编号 2-2 (2012) |
Possibility for finding of a common solution for Navier-Stokes equations |
![PDF](/img/labels/pdf.png) (Rus)
|
Vyskrebtsov V.
|
卷 6, 编号 2-2 (2012) |
Radiospectroscopy of magnetic materials |
![PDF](/img/labels/pdf.png) (Rus)
|
Kozlov V.
|
卷 6, 编号 2-2 (2012) |
Observability in problems of mathematical physics |
![PDF](/img/labels/pdf.png) (Rus)
|
Korneichuk L., Vyskrebtsov V.
|
卷 6, 编号 2-2 (2012) |
Approximate model of forecasting resource during the impact of non-Gaussian processes |
![PDF](/img/labels/pdf.png) (Rus)
|
Podvoisky A., Borovskih V.
|
卷 6, 编号 2-2 (2012) |
Numerical solution for the stress concentration problem for the case of a three-layered elastic plane with the two identical vertically placed circular holes under transverse compression |
![PDF](/img/labels/pdf.png) (Rus)
|
Mikhaylova V., Sukhomlinov L., Mazin V.
|
卷 6, 编号 2-2 (2012) |
Analysis and synthesis of robust control for linear systems of double damping |
![PDF](/img/labels/pdf.png) (Rus)
|
Trindyuk V., Kiyko G.
|
卷 6, 编号 2-2 (2012) |
Dynamic robust stabilization problem for the linear nonstationary systems |
![PDF](/img/labels/pdf.png) (Rus)
|
Trindyuk V., Kiyko G.
|
卷 6, 编号 2-2 (2012) |
The conclusion of the Dirac matrices in the real, complex and quaternionic representations |
![PDF](/img/labels/pdf.png) (Rus)
|
Ketsaris A.
|
卷 6, 编号 2-2 (2012) |
Basic experiment and method for identifying of material functions of elastic-plastic deformation theory |
![PDF](/img/labels/pdf.png) (Rus)
|
Bondar V., Prolubnikova A.
|
卷 6, 编号 2-2 (2012) |
The problem of spreading of the plastic layer consisting of different environments |
![PDF](/img/labels/pdf.png) (Rus)
|
Kadymov V.
|
卷 6, 编号 2-2 (2012) |
Multicriteria optimal design turbomachine disk |
![PDF](/img/labels/pdf.png) (Rus)
|
Temis Y., Yakushev D.
|
卷 6, 编号 2-2 (2012) |
Generalized method of supplementary strain in the problems of beam torsion |
![PDF](/img/labels/pdf.png) (Rus)
|
Temis Y., Lazarev A., Malanova O.
|
卷 6, 编号 2-2 (2012) |
Approximation of plasticity functionals of elastic-plastic processes theory in non-isothermal loading under creep conditions |
![PDF](/img/labels/pdf.png) (Rus)
|
Bondar V., Danshin V., Kostin A.
|
卷 6, 编号 2-1 (2012) |
Turbo fan for intercooling system of transport turbodiesel engine |
![PDF](/img/labels/pdf.png) (Rus)
|
Andreenkov A.
|
卷 6, 编号 2-1 (2012) |
Mathematical description and optimization of performance of transmission and brake control in problems of optimal vehicle engineering |
![PDF](/img/labels/pdf.png) (Rus)
|
Akhmedov A., Bakhmutov S.
|
卷 6, 编号 2-1 (2012) |
Test-bench for tractive ability and efficiency tests of belt drives |
![PDF](/img/labels/pdf.png) (Rus)
|
Balovnev N., Dmitrieva L., Semin I.
|
卷 6, 编号 2-1 (2012) |
Experimental estimate of tractive ability of belt drives with different methods of belt tensioning |
![PDF](/img/labels/pdf.png) (Rus)
|
Balovnev N., Dmitrieva L., Semin I.
|
卷 6, 编号 2-1 (2012) |
Study of stability and controllability of hybrid car with variable-in-motion drive |
![PDF](/img/labels/pdf.png) (Rus)
|
Baulina E., Dementyev Y., Iturralde P., Kislov A.
|
卷 6, 编号 2-1 (2012) |
Prospects medium-tonnage urban commercial vehicles with hybrid power plant with Russian-made tractive electrical equipment |
![PDF](/img/labels/pdf.png) (Rus)
|
Bakhmutov S., Serebryakov V., Baulina E., Kulikov A., Filonov A.
|
卷 6, 编号 2-1 (2012) |
Method of forecasting of fatigue durability in the conditions of quasimonotonous degradation of physico-mechanical properties of an object |
![PDF](/img/labels/pdf.png) (Rus)
|
Borovskikh V., Podvoyskiy A.
|
卷 6, 编号 2-1 (2012) |
Modeling of the device for balancing of a Li-Ion battery with switched capacitors for electric vehicles |
![PDF](/img/labels/pdf.png) (Rus)
|
Varlamov D.
|
卷 6, 编号 2-1 (2012) |
Approximate method for calculating of internal combustion engine intake noise |
![PDF](/img/labels/pdf.png) (Rus)
|
Vakhitov Y., Zagayko S.
|
卷 6, 编号 2-1 (2012) |
Methods of selecting the rational combination of materials for sandwich panels of a bus body |
![PDF](/img/labels/pdf.png) (Rus)
|
Voronkov O., Peskov V.
|
卷 6, 编号 2-1 (2012) |
Kinetostatical analysis of a lifting mechanism |
![PDF](/img/labels/pdf.png) (Rus)
|
Gebel E., Zhursenbaev B., Sarbasov A.
|
卷 6, 编号 2-1 (2012) |
Complex automation of petrol stations |
![PDF](/img/labels/pdf.png) (Rus)
|
Golovkova E., Sofiev A.
|
卷 6, 编号 2-1 (2012) |
Piecewise continuous regulation of a tractor speed |
![PDF](/img/labels/pdf.png) (Rus)
|
Gorodetskiy K., Bannikov M., Ivkova G., Muratova S., Shuvaev D.
|
卷 6, 编号 2-1 (2012) |
Forecasting of operating temperature of pneumatic tires of rock handler trucks |
![PDF](/img/labels/pdf.png) (Rus)
|
Goryunov S., Sharipov V.
|
卷 6, 编号 2-1 (2012) |
Numerical and experimental investigation of braking performance of a bus |
![PDF](/img/labels/pdf.png) (Rus)
|
Groshev A., Konikova G., Kostin S., Trusov Y., Tumasov A.
|
卷 6, 编号 2-1 (2012) |
Analysis of the design of the automotive generator of reciprocating type |
![PDF](/img/labels/pdf.png) (Rus)
|
Dukhanina V., Ketsaris A.
|
卷 6, 编号 2-1 (2012) |
Analysis of the workflow of linear generator of reciprocating motion type |
![PDF](/img/labels/pdf.png) (Rus)
|
Dukhanin V., Ketsaris A.
|
卷 6, 编号 2-1 (2012) |
Selection of a rational layout in the compact urban vehicle design |
![PDF](/img/labels/pdf.png) (Rus)
|
Ivshin K., Polozov A.
|
卷 6, 编号 2-1 (2012) |
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle |
![PDF](/img/labels/pdf.png) (Rus)
|
Kamennyy A., Kostyukov A., Makarov A., Pustyntsev M.
|
卷 6, 编号 2-1 (2012) |
Development of a system of two-stage turbocharging for KAMAZ EURO-5 engines |
![PDF](/img/labels/pdf.png) (Rus)
|
Kaminskiy V., Grigorov I., Kaminskiy R., Sibiryakov S., Kuchev S., Likhachev V.
|
卷 6, 编号 2-1 (2012) |
Development and production of turbochargers and other engine components and systems using information technologies |
![PDF](/img/labels/pdf.png) (Rus)
|
Kaminskiy V., Kaminskiy R., Gusak A., Sibiryakov S., Korneev S., Kovaltsov I., Sergeev A., Ishchenko N., Olisova T.
|
卷 6, 编号 2-1 (2012) |
Development of test-benches for control and research tests of turbochargers |
![PDF](/img/labels/pdf.png) (Rus)
|
Kaminskiy V., Kaminskiy R., Lazarev A., Grigorov I., Kostyukov A., Korneev S., Kovaltsov I., Sergeev A., Gusak A., Sibiryakov S.
|
卷 6, 编号 2-1 (2012) |
Turbo-electric compressor: potential, design and prospects |
![PDF](/img/labels/pdf.png) (Rus)
|
Kaminskiy V., Lazarev A., Kaminskiy R., Sibiryakov S.
|
卷 6, 编号 2-1 (2012) |
Information search for identifying of the trends in the motor engineering development for a specific region (Kazakhstan) |
![PDF](/img/labels/pdf.png) (Rus)
|
Kim V., Kaminskiy V.
|
卷 6, 编号 2-1 (2012) |
Application of active wheel modules in articulated trucks for transportation of oversized and heavy cargo |
![PDF](/img/labels/pdf.png) (Rus)
|
Korkin S., Kurmaev R., Kramer A.
|
卷 6, 编号 2-1 (2012) |
Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger |
![PDF](/img/labels/pdf.png) (Rus)
|
Alexeev R., Kostyukov A.
|
卷 6, 编号 2-1 (2012) |
Investigation of combustion modes of energy-accumulating materials |
![PDF](/img/labels/pdf.png) (Rus)
|
Kostykov A., Kuznetsov V., Ashcheulnikov E., Rodkin K.
|
卷 6, 编号 2-1 (2012) |
Microturbine with efficiency of over 43% |
![PDF](/img/labels/pdf.png) (Rus)
|
Kostykov A.
|
卷 6, 编号 2-1 (2012) |
The comparative evalution of the vibration damping characteristics of materials for modification of an oil pan and valve covers of an engine |
![PDF](/img/labels/pdf.png) (Rus)
|
Kruglov K., Sherbakov V.
|
卷 6, 编号 2-1 (2012) |
Development of a mathematical model of an energy-absorbing seat, using the results of piling tests |
![PDF](/img/labels/pdf.png) (Rus)
|
Kulakov N., Gavrilov E.
|
卷 6, 编号 2-1 (2012) |
Evaluation of explosive impact of mines on structures and crews of armored vehicles. Damaging Effects. Methods of protection |
![PDF](/img/labels/pdf.png) (Rus)
|
Kulakov N., Shevchenko A.
|
卷 6, 编号 2-1 (2012) |
Numerical and experimental stufy of composite ceramic armor resistance when exposed to high-speed bullets and fragments |
![PDF](/img/labels/pdf.png) (Rus)
|
Kulakov N., Lyubin A., Skakbaeva A.
|
卷 6, 编号 2-1 (2012) |
Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain |
![PDF](/img/labels/pdf.png) (Rus)
|
Kulikov I.
|
卷 6, 编号 2-1 (2012) |
Methods of creating an "intelligent" automatic adaptive transmission control multidrive wheeled vehicle |
![PDF](/img/labels/pdf.png) (Rus)
|
Lepeshkin A.
|
1701 - 1800 的 2404 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|