检索

期
标题
作者
卷 7, 编号 2-2 (2013)
Designing of tools for finding the yield stress of materials by thermography method
Kosachev N., Petrov P., Prokopov F., Voronkov V.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Determination of metals plasticity by combined cross-extrusion and upset
Krutina E., Kalpin Y.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Modeling the evolution of the deformation zone under various extrusion schemes
Rjabicheva L., Usatjuk D.
PDF
(Rus)
卷 9, 编号 4-1 (2015)
Calculation of contact parameters of loaded body with outer ring raceway in metalpolymer roller bearing
Li R., Mironenko A.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Designing compensators of thermal stress for modern aviation turboshaft engine by powder metallurgy methods
Isaeva E., Perevoin S., Isaev D.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Analysis of stress and strain state in the elementary volume at the example of the upseting process
Mamaev V.
PDF
(Rus)
卷 9, 编号 3-4 (2015)
Supplementary stress method convergence rate acceleration
Lazarev A.
PDF
(Rus)
卷 5, 编号 1 (2011)
The Hertzian problem for the ring layer of the optional thickness subject to friction forces in the contact area
Bozhkova L., Ryabov V., Noritzina G.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Visco-plastic forming of hemispherical shells by gas
Sobolev J., Petuhov I.
PDF
(Rus)
卷 9, 编号 3-4 (2015)
Application of the analytical functions theory for exact calculations of gear teeth stress
Dorofeev V.
PDF
(Rus)
卷 3, 编号 1 (2009)
Clutch Load Determination on the Basis of Test Data
Kretov A., Esakov A.
卷 7, 编号 2-2 (2013)
Ultimate capabilities of rotary drawing process of axially symmetric parts made from anisotropic materials
Jakovlev S., Tregubov V., Osipova E.
PDF
(Rus)
卷 7, 编号 3-1 (2013)
A variant of link between stress and deformation in the theory of depressed shells
Volodin V., Nadirov E.
PDF
(Rus)
卷 9, 编号 2-4 (2015)
Deformation characteristics of aluminum alloys
Vladimirov S.
PDF
(Rus)
卷 6, 编号 1 (2012)
REDUCTION OF THERMAL STRESSES IN THE PLATE HEAT EXCHANGER AT NONSTEADY OPERATIONAL MODES
Iskhakov V., Merkulov V., Sugonyaev M.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Phenomenological approach to the determination of the stress state of the indicator chart for plasticity
Grushko A.
PDF
(Rus)
卷 7, 编号 1-4 (2013)
Development of rapid diagnostics and prediction of residual life based on detection of accumulated damage of metal structure during sustained loading
Zorin E.
PDF
(Rus)
卷 9, 编号 2-4 (2015)
Elements of nonlinear continuum mechanics in the modern theory
Brovko G.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Generalized method of supplementary strain in the problems of beam torsion
Temis Y., Lazarev A., Malanova O.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Calculation of strength reliability and fatigue life of structural elements of mobile machines, loaded with random bending and twisting moments
Gusev A., Scherbakov V., Starodubtseva S., Grebenkina I.
PDF
(Rus)
卷 8, 编号 2-4 (2014)
System of governing equations for calculation of shallow cylindrical panels
Volodin V., Nadirov E.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Selection of chrome-nickel steel hot forging mode for steam turbine blades
Balkova T.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Research of hardened galvanized sheet bending
Tipalin S.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Vibration loading of large transport system when driving on the road with random irregularities
Gusev A., Scherbakov V., Starodubtseva S., Grebenkina I.
PDF
(Rus)
卷 8, 编号 4-4 (2014)
Influence of parameters of geometrically nonlinear endochronic theory of inelasticity on description of stress relaxation process
Kadashevich Y., Pomytkin S., Pomytkina T.
PDF
(Rus)
卷 10, 编号 1 (2016)
The study load distribution between rolling elements in metal-polymer roller bearing
Li R., Mironenko A.
PDF
(Rus)
卷 6, 编号 2-4 (2012)
The impact of stress on the culture of tissue Arabidopsis thaliana ininvitroconditions
Dolgikh Y., Sedov K.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Theoretical and technological aspects of tube billets pinching
Sosenushkin E., Janovskaja E., Hachatrjan D., Kinderov V.
PDF
(Rus)
卷 9, 编号 1-1 (2015)
Bending torsion in the V-belt drives
Martynov V.
PDF
(Rus)
1 - 29 的 29 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##