检索

期
标题
作者
卷 91, 编号 1 (2024)
Justification of range limits of root spray angle of an adaptive spraying device
Rodimtsev S., Dembovsky I.
PDF
(Rus) PDF
(Eng)
卷 90, 编号 2 (2023)
Development and verification of a mathematical model of the wheel mover interaction with deformable soil, based on the application of the method of discrete elements
Pashkovsky R., Evseev K.
PDF
(Rus)
卷 88, 编号 5 (2021)
Evaluation of the offset of the angular scale to improve the control accuracy of the single-cylinder engine
Abramov P.
PDF
(Rus)
卷 90, 编号 3 (2023)
Field testing of a disk-chisel harrow
Tarasenko B., Khav’yarimana E., Drobot V., Rudnev S.
PDF
(Rus)
卷 82, 编号 6 (2015)
Substantiation of geometrical parameters of onion planter hopper
Ovtov V., Yemelyanov P., Aksenov A.
卷 79, 编号 2 (2012)
Improving the milling unit design
Ozherelyev V.
卷 77, 编号 12 (2010)
Optimization of parameters of disk chopping apparatus in the cutting plane
Kotov A.
卷 87, 编号 2 (2020)
The study of the technological process of the operation of the stalk lifter when mowing down dead grain and leguminous crops
Primak V., Popov A.
PDF
(Rus)
卷 79, 编号 8 (2012)
Effect of lifting height of exhaust valve on the exhaust system
Zholobov L., Suvorov Y.
卷 77, 编号 2 (2010)
Optimal parameters of tops removing working member of cutter for leaf-and-stalk mass
Laryushin N., Laryushin A., Frolov D.
卷 83, 编号 8 (2016)
Mitigation of effect of compacted soil lump
Sidorov S., Khoroshenkov V., Mironov D., Luzhnova E.
PDF
(Rus)
卷 80, 编号 9 (2013)
On constructional deterioration of working organs of soil-cultivating cutters
Zvolinskiy V.
卷 82, 编号 1 (2015)
Determination of shavings area during the operation of tillers
Makhmutov M., Bykovskiy V.
卷 79, 编号 1 (2012)
Parameters of gas distribution mechanism and the technical level of piston engines
Makushin A.
卷 76, 编号 11 (2009)
An assessment of energy consumption of the mill with flat and helicoid blades for broadcast tillage
Belov M., Gadzhiyev P., Koval K.
卷 83, 编号 8 (2016)
Influence of the shape of disk knife on the pinching of material
Kobyakov I., Evchenko A., Demchuk E.
PDF
(Rus)
卷 80, 编号 10 (2013)
Pneumohydraulic device for energy-effective and ecofriendly technologies of pesticide application in plant cultivation
Kireyev I., Koval Z.
卷 82, 编号 4 (2015)
Theoretical substantiation of vertical load on roller disk of plough device
Normirzayev A.
卷 79, 编号 1 (2012)
The optimal profile of subsurface cultivator hoe
Svechnikov P.
卷 86, 编号 4 (2019)
Performance assessment of motor oils by the wetting angle
Vahrushev V., CHerepahin S.
PDF
(Rus)
卷 83, 编号 9 (2016)
Substantiation of installation angle of inclined wall of charging hopper of a root chopper
Savinykh P., Aleshkin A., Bulatov S., Smirnov R.
PDF
(Rus)
卷 81, 编号 1 (2014)
Increase of high angle conveyors’ technological reliability
Kushnir V., Kim N., Benyukh O., Romanyuk N., Sashko K.
卷 86, 编号 4 (2019)
Design of a torque sensor on the shafts of a wheeled tractor
Gerashchenko V., Loubach V., Kovalenko N.
PDF
(Rus)
卷 83, 编号 1 (2016)
Research of movement of hexagonal and circular disk working organs of tillage machines
Kobyakov I., Yevchenko A.
PDF
(Rus)
卷 81, 编号 1 (2014)
Slipping process research of drive wheels of the МТЗ-100 tractor in breakaway and acceleration modes
Loparev A., Venglinskiy A., Komkin A.
卷 79, 编号 12 (2012)
Tractive resistance of a disk plough-harrow
Nestyak V., Kobyakov I., Soyunov A.
卷 81, 编号 7 (2014)
To the substantiation of parameters of energy-saving undermining working organ
Norchayev D.
卷 77, 编号 12 (2010)
An analysis of soil compaction by frontal disk harrows
Zvolinsky V., Gavrilin M.
卷 87, 编号 4 (2020)
Justification of the operating modes of the needle disk of a new design
Shmidt A., Kem A., Chekusov M., Kuz'min D., Soyunov A.
PDF
(Rus)
卷 79, 编号 10 (2012)
A semi-automatic device for the adjusting of approach angle of disk header’s tools
Gorshkov Y., Voynov V., Kalugin A.
卷 81, 编号 8 (2014)
Substantiation of parameters of separator for small leaf part of grass plant
Abilzhanov D., Abilzhanuly T., Uteshev V.
卷 77, 编号 5 (2010)
The quality of soil cultivation by disk working members
Kobyakov I.
卷 85, 编号 5 (2018)
To determine the optimal tilt angle of the lattice holes of the bottom of the inclined chamber
Ozhereliev V., Nikitin V.
PDF
(Rus)
卷 80, 编号 2 (2013)
Constructional characteristic of a scraping transporter designed for sugar beet mother plants taking from bunker
Yemelyanov P., Ovtov V.
卷 81, 编号 8 (2014)
Cultivator for preplanting cultivation equipped with rope working organ
Telichkina N.
卷 79, 编号 7 (2012)
Calculation of laws of motion for the valves (tappets) of motor and tractor engines
Makushin A.
卷 77, 编号 5 (2010)
Designing a gas distribution mechanism for motor and tractor diesel
Makushin A.
卷 84, 编号 7 (2017)
Modeling the operation of a screw L-shaped knife of a tiller
Dranyaev S., Chatkin M., Koryavin S.
PDF
(Rus)
卷 80, 编号 5 (2013)
Optimization of the inclination angle of working area of a potato harvester separator
Maksimov L., Strunov A., Muratov P., Vasilyev A.
卷 82, 编号 1 (2015)
Selection of rational parameters for blade rotary working organ on the basis of its kinematic analysis
Akimov A., Konstantinov Y., Fedorov D., Akvilyanova I.
1 - 40 的 40 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##