检索

期
标题
作者
卷 8, 编号 2-4 (2014)
Influence of gradient tensor shape in geometrically nonlinear endochronic theory of creep
Kadashevich Y., Pomytkin S.
PDF
(Rus)
卷 5, 编号 1 (2011)
Comparative analysis of methods for cutting process calculating (to development of analytical method for cutting processes calculating)
Maksimov Y., Olenin L., Shaparovskaya M.
PDF
(Rus)
卷 8, 编号 4-4 (2014)
Influence of parameters of geometrically nonlinear endochronic theory of inelasticity on description of stress relaxation process
Kadashevich Y., Pomytkin S., Pomytkina T.
PDF
(Rus)
卷 2, 编号 1 (2008)
Deformation of Parts in Manufacture
Zinchenko V., Gladkov V., Kruglov S.
PDF
(Rus)
卷 4, 编号 2 (2010)
Technological process optimization for aviation part frame manufacturing on the basis of calculations in the automated warpage computation system
Kluchnikov S., Barakhtenko E.
PDF
(Rus)
卷 7, 编号 3-1 (2013)
The study of deformations in reinforced plates
Parakhoni A., Osipov N.
PDF
(Rus)
卷 8, 编号 4-2 (2014)
Research of distribution of plastic deformation on thickness of steel strips
Aldunin A., Shumeev A.
PDF
(Rus)
卷 9, 编号 1-4 (2015)
Limiting parameters of forming round steel sheet, locally loaded by combined profile punch
Mikhaylova V., Petrov V., Sukhomlinov L.
PDF
(Rus)
卷 6, 编号 2-1 (2012)
Microturbine with efficiency of over 43%
Kostykov A.
PDF
(Rus)
卷 7, 编号 3-1 (2013)
A variant of link between stress and deformation in the theory of depressed shells
Volodin V., Nadirov E.
PDF
(Rus)
卷 4, 编号 1-4 (2014)
Extreme deformation of edge-fixed round steel plate under the action of a spherical punch which radius is much smaller than the radius of the plate
Mikhaylova V., Sukhomlinov L.
PDF
(Rus)
卷 9, 编号 2-4 (2015)
Elements of nonlinear continuum mechanics in the modern theory
Brovko G.
PDF
(Rus)
卷 6, 编号 2-2 (2012)
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation
Vetrova E.
PDF
(Rus)
卷 7, 编号 3-1 (2013)
Approaches to formulation and methods of solving boundary value problems of solid mechanics
Brovko G.
PDF
(Rus)
卷 9, 编号 1-2 (2015)
Selection of chrome-nickel steel hot forging mode for steam turbine blades
Balkova T.
PDF
(Rus)
卷 6, 编号 1 (2012)
APPROXIMATE SOLUTION OF THE CONTACT PROBLEM FOR THE TWO-LAYER FLEXIBLE COATING OF A SOLID CYLINDER
Bozhkova L., Ryabov V., Noritsina G., Akulshina T.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Simulation of mechanical tests aimed to investigate the flow stress during the abrupt change of the strain rate
Potapenko K., Voronkov V., Petrov P.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Resource-saving preparation of the structure and mechanical properties of steel 40X for cold die forging of hardware
Pachurin G., Filippov A., Chinenkov S.
PDF
(Rus)
卷 4, 编号 1-4 (2014)
The revised method of solving the contact problem for ring layer, taking into account the forces. Message 1. Mathematical model of contact interaction of ring layer with rigid base
Bozhkova L., Noritsyna G., Ryabov V.
PDF
(Rus)
卷 10, 编号 1 (2016)
Evaluation of strength of undercarriage of light commercial vehicles with design changes
Shurygin V., Tumasov A., Orlov L., Sharov D.
PDF
(Rus)
卷 7, 编号 1-1 (2013)
Cooling of rotary heat exchanger frame
Dementyev A., Kostyukov A.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Developing of analytical model for bevel cutting
Olenin L., Storchak M., Lekveischvili M.
PDF
(Rus)
卷 8, 编号 2-4 (2014)
System of governing equations for calculation of shallow cylindrical panels
Volodin V., Nadirov E.
PDF
(Rus)
卷 2, 编号 1 (2008)
Experience in the Creation and Implementation of complex industry vacuum systems (based on devices and component parts eliminating movement friction and designed to work in the field of micro-and nano-electronics and other high-tech)
Vasin V.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
Ultimate capabilities of rotary drawing process of axially symmetric parts made from anisotropic materials
Jakovlev S., Tregubov V., Osipova E.
PDF
(Rus)
卷 8, 编号 1-2 (2014)
Experimental determination of axial residual stresses in the surface layer of coarse thread root
Ovseenko A., Klauch D., Nosov D., Kudinov A., Bolotin G., Kotov I.
PDF
(Rus)
卷 2, 编号 1 (2008)
Analysis of Mechanics of the Process of Cutting Hardened Material. Chip formation
Olenin L.
PDF
(Rus)
卷 7, 编号 2-1 (2013)
Vibration loading of large transport system when driving on the road with random irregularities
Gusev A., Scherbakov V., Starodubtseva S., Grebenkina I.
PDF
(Rus)
卷 7, 编号 1-3 (2013)
Contact problem for two-layer elastic coating of solid cylinder
Bozhkova L., Ryabov V., Noricina G.
PDF
(Rus)
卷 8, 编号 3-4 (2014)
Limit forming of fixed on the contour round steel plate in two-stage forming process using spherical punches of small radius
Mikhaylova V., Sukhomlinov L.
PDF
(Rus)
卷 7, 编号 2-2 (2013)
The relationship of elastic deformations of four-high system during formation of a profile and flatness of rolled strips
Belsky M., Mukhin Y.
PDF
(Rus)
卷 8, 编号 4-2 (2014)
Influence of change of speed of deformation on nature of hardening of material
Kiselyov D., Tipalin S., Shpunkin N., Tipalina A.
PDF
(Rus)
卷 8, 编号 3-4 (2014)
Adjusted method of solving the contact problem for an annular layer taking into account the friction forces. Statement 2. A solution of functional equations defining the mathematical model of the contact problem
Bozhkova L., Noritsina G., Ryabev V.
PDF
(Rus)
1 - 33 的 33 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语
##common.cookie##