检索

期
标题
作者
卷 90, 编号 5 (2023)
Mathematical model of the condensation process in a cylinder of a piston engine
Kolunin A., Lazarev E., Kaminskiy V., Korytov M., Ruzimov A.
PDF
(Rus) PDF
(Eng)
卷 89, 编号 3 (2022)
The experimental study of mechanical losses in the modern diesel engine
Khannanov M., Gumerov I., Fardeev L., Kulikov A., Alimgulov E.
PDF
(Rus)
卷 89, 编号 5 (2022)
Use of fuel injection equipment with increased injection pressure for reducing environmental footprint
Melbert A., Nguyen T., Mashensky A.
PDF
(Rus)
卷 89, 编号 6 (2022)
Improvement of the method of calculation of pressure of combine harvester propulsion on soil
Skorlyakov V., Revenko V.
PDF
(Rus)
卷 89, 编号 6 (2022)
Technological process of field crops spraying with slotted sprayers
Kireev I., Danilov M., Koval’ Z., Zimin F.
PDF
(Rus)
卷 88, 编号 1 (2021)
Evaluation of methods for experimental and analytical determination of the contour area of the contact patch of a pneumatic tire with a support base
Lipkan' A., Panasyuk A., Godzhayev Z., Lavrov A., Rusanov A., Kazakova V.
PDF
(Rus) PDF
(Eng)
卷 83, 编号 4 (2016)
Impact of turbocharging on the startability of diesel engines in winter
Krokhta G., Khomchenko E., Usatykh N.
PDF
(Rus)
卷 80, 编号 10 (2013)
Diesel combustion chamber with film carburation
Makarov V.
卷 83, 编号 12 (2016)
Reduction of aftereffect of machine units on the soil
Okunev G., Astaf'ev V., Kuznetsov N.
PDF
(Rus)
卷 87, 编号 6 (2020)
Study of the diesel engine working process during its operation with a fuel injection pressure of 300 MPa
Quynh N., Dunin A.
PDF
(Rus)
卷 79, 编号 9 (2012)
Influence of parameters of the diametrical fan's wheel blades on the acoustic characteristics
Sychugov N., Zholobov N.
卷 78, 编号 12 (2011)
An automatic device for air pressure regulation in the tires of high power tractors with locked axles drive
Gorshkov Y., Chetyrkin Y., Bogdanov A., Leschenko Y.
卷 86, 编号 6 (2019)
Development of a method for obtaining a section of reduced stiffness on the elastic characteristic of a vehicle tire
Ryabov I., Pozdeev A., Erontaev V., ZHdamirova E.
PDF
(Rus)
卷 85, 编号 3 (2018)
Simulation modeling of the volumetric hydraulic drive
Popov A.
PDF
(Rus)
卷 83, 编号 2 (2016)
Air flow distribution in excessive seeds dumping zone of a pneumatic sowing device of overpressure
Popov A.
PDF
(Rus)
卷 80, 编号 5 (2013)
Impact of the operational factors on lubrication conditions of crankshaft bearings of motor and tractor engines
Makushin A., Barylnikova Y.
卷 79, 编号 8 (2012)
Effect of lifting height of exhaust valve on the exhaust system
Zholobov L., Suvorov Y.
卷 78, 编号 1 (2011)
Geometric parameters of ploughshares' radiating wear
Mikhalchenkov A., Kovalev A., Kozarez I.
卷 86, 编号 3 (2019)
The results of the study of the rigidity of tires of tractor wheels and its effect on tractor vibrations
Zolotarevskaya D.
PDF
(Rus)
卷 84, 编号 8 (2017)
Increase of durability and wear resistance of internal combustion engine parts by changing their design features
Kochenov V., Grunin K.
PDF
(Rus)
卷 83, 编号 1 (2016)
Reynolds number effect on the aerodynamic characteristic of transverse fans
Sychugov N.
PDF
(Rus)
卷 80, 编号 5 (2013)
Assessment of bearing and coupling passability of chemicalization vehicles on grounds of low bearing value
Pryadkin V.
卷 79, 编号 8 (2012)
T-250 tractor: life and fate
Lipkovich E.
卷 78, 编号 1 (2011)
Boost pressure control by tractor diesels' turbo-superchargers diagnosis
Inshakov A., Kuvshinov A.
卷 84, 编号 8 (2017)
Analytical justification of the load capacity of pneumatic tires for tractors and agricultural machinery
Tarasov V., Boyarkina I., Edigarov V., Malyy V.
PDF
(Rus)
卷 80, 编号 7 (2013)
Influence of wheel parameters on tire volume
Makhmutov M., Bykovskiy V.
卷 79, 编号 3 (2012)
Analysis of the flax fiber pressing in compression chamber
Kovaliov M., Apykhin A.
卷 78, 编号 3 (2011)
Methods of assessment of mobile energetic vehicles' technological versatility
Kutkov G., Kuzmichiov V.
卷 87, 编号 6 (2020)
Factors affecting the change in wheel resistance and track depth of wide-grip sprinkler machines
Zhuravleva L., Tkhuan N.
PDF
(Rus)
卷 84, 编号 10 (2017)
New opportunities to improve the fuel supply system with a battery fuel system
Dunin A., Golubkov L., Mal'chuk V., Dushkin P., Ivanov I.
PDF
(Rus)
卷 82, 编号 9 (2015)
Increasing soil compacting impact by roller of a combined machine for preplanting cultivation
Akhmetov A.
卷 79, 编号 2 (2012)
Tribological properties of hydraulic cylinders' sealings polymer materials
Borisov V., Kuznetsov V., Vodyakov V.
卷 77, 编号 10 (2010)
An electro-hydrodynamic engine for the environmentally safe transport
Sokovikov V., Strokov P.
卷 87, 编号 3 (2020)
Computational and experimental assessment of the influence of ultra-low pressure tires of mobile power equipment on soil
Godzhaev Z., Goncharenko S., Artemov A., Pryadkin V., Godzhaev T.
PDF
(Rus)
卷 82, 编号 12 (2015)
Calculation features of cycle of reciprocating internal combustion engine operating on gaseous fuel
Gavrilov A., Gots A.
卷 81, 编号 5 (2014)
Experimental investigation of diagnostic system for the Д-245-35 motor-and-tractor engine turbocharging
Inshakov A., Kuvshinov A., Kurbakov I., Kornaukhov O.
卷 78, 编号 9 (2011)
Designing the geometrical parameters of interacting surfaces of internal combustion engine parts
Kochenov V.
卷 77, 编号 8 (2010)
Experimental evaluation of wide-profile tire roadhold
Zaytsev S., Streblechenko L., Goncharenko S., Pryadkin V.
卷 84, 编号 4 (2017)
MATHEMATICAL MODEL OF A PNEUMATIC RELAXATION OF SEAT SUSPENSION WITH ENERGY RECUPERATION
Lyashenko M., Shekhovtsov V., Iskaliev A.
PDF
(Rus)
卷 79, 编号 10 (2012)
Analysis of belts deformation by pulleys in flax harvesting machines
Kovaliov M., Vinogradov A.
卷 81, 编号 2 (2014)
Low pressure tire as an optimal mover for vehicles on weak soils
Kotlyarenko V., Goncharenko S., Godzhayev Z., Shapiro V.
卷 78, 编号 11 (2011)
Reducing the circulating power in the wheel drive of power tractors
Gorshkov Y., Chetyrkin Y.
卷 77, 编号 6 (2010)
Indices of fertilizer application complexes' bearing and agroecological cross-country ability
Gorin G., Radkevich V., Yanchuk A.
卷 86, 编号 1 (2019)
The influence of the number of axles of wheeled transport traction machines on rolling resistance
SHilo I., Romanyuk N., Orda A., Kushnir V.
PDF
(Rus)
卷 84, 编号 1 (2017)
METHOD OF IMPROVING THE CHARACTERISTICS OF A GAS ENGINE, DEVELOPED ON THE BASE OF A DIESEL ENGINE
FOMIN V., GUSAROV V., LATYSHEV A.
PDF
(Rus)
卷 79, 编号 12 (2012)
A test bench for the examination of lubrication conditions of crankshaft bearings of internal-combustion engines
Makushin A., Barylnikova Y.
卷 81, 编号 11 (2014)
Calculation algorithm of piston engine indices at the design stage
Gavrilov A., Gots A.
卷 78, 编号 11 (2011)
The dependence of indicated power on the time-section of gas distribution mechanism of internal combustion engine
Zholobov L., Dydykin A., Suvorov E.
卷 76, 编号 10 (2009)
An auger-type oil press
Shevchuk R., Vasil'kevich V., Tom'yuk V., Bazilyak L.
卷 85, 编号 4 (2018)
Analysis of the influence of the main factors on the characteristics of the elastic properties of elastic wheels of tractors
Zolotarevskaya D.
PDF
(Rus)
卷 83, 编号 5 (2016)
Specific speed and overall dimensions in calculation and selection of transverse fans
Sychugov N.
PDF
(Rus)
卷 79, 编号 11 (2012)
State and trends of development of the tractor industry for Russian forest complex
Bartenev I., Drapalyuk M.
卷 82, 编号 3 (2015)
Aerodynamic configurations, characteristics and application of transverse fans
Sychugov N.
1 - 53 的 53 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回（例如，隐含AND）
  • 使用OR结合多个检索词，便于查找含有这些检索词的文章，例如education OR research
  • 使用括号来创建更复杂的查询; 例如：archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如： "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如：online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##