检索

标题
作者
Analysis of the influence of radial stiffness of the metal wheel on traction characteristics
Pashkovsky R., Evseev K.
Development and verification of a mathematical model of the wheel mover interaction with deformable soil, based on the application of the method of discrete elements
Pashkovsky R., Evseev K.
Method for predicting the technical appearance of grain and forage harvesters of new generations with a substantiation of the structure of their vibration protection system
Sirotin P.
Improvement of the method of calculation of pressure of combine harvester propulsion on soil
Skorlyakov V., Revenko V.
Analysis of the balance of the crank-slider drive mechanism of the cutting apparatus by the method of principal point vectors
Kotov A.
Coordinate calculation method of steering linkage
Malinovskiy M., Gladov G.
Optimal operation conditions of cogeneration plants according to the method of golden section
Kryaklina I.
An inertial method for the estimation of wheel and caterpillar machines' power efficiency
Yegorov A.
A method for calculation of oil supply to the parts of units of agricultural machinery
Malomyzhev O., Fedotova N., Skutel'nik V.
Evaluation of the impact of wheel tractor velocity and other factors on its oscillations
Zolotarevskaya D.
Calculation method of modeling of deformation properties of soils in the forecasting problems of interaction of wheeled mover with the bearing surface
Kurdyuk V., Volskaya N., Rusanov O.
Mathematical modeling of a wheel tractor-trailer oscillations
Zolotarevskaya D.
Optimal and admissible regimes of machine-and-tractor unit operation
Kalachin S.
Synthesis of control model of operating reliability of combine harvesters
Tsarev Y., Simon D.
Topological optimization of a truck suspension level
Vdovin D., Kotiyev G.
Systemic and analytical method for the formation of technological policy in the agro-industrial sector of Russian Federation
Zhalnin E.
About methodology of farm tractors market statistical modeling
Mininzon V., Tyulenev A.
Method of mathematical modeling of grain moving process in conveying channel of stripper header
Buryanov M., Buryanov A., Chervyakov I.
Modeling of loads in hydrostatic power drive joints
Senin P., Zemskov A., Stolyarov A., Ionov P.
Ways of increasing the reliability of grain combine harvesters in the network of dealer structures of Southern Federal District
Tsariov Y., Filobok S.
Method and equipment for express diagnostics of quenching elements of the suspension for motor transport means
Drincha V., Moshkin N., Bazarov D.
Method of mathematical modeling of interaction between plants of grain crops and stripper drum of a header
Buryanov M., Buryanov A., Kostylenko O.
Failure-free performance of combines group with static reserve
Korolkova L., Ignatyev G., Mashrabov N.
Exclusion of errors in variable levels of factors during the planning of an experiment
Medovnik A., Tsybulevskiy V., Tverdokhlebov S., Tsymbal A.
Vector analysis of the kinematic characteristics of two-joint cardan shaft
Kotov A.
Design workflow for load-bearing parts by the example of interaxle differential lock fork of a multiaxial wheeled vehicle
Vdovin D., Kotiyev G.
Improving the methods of processing test data of land-based vehicles
Osinenko P.
Analysis of hydrodynamic characteristics of sprays of nozzles of ICE
Altukhov S., Shukhanov S.
A way of complex variational problems solution by the collocation method
Kovbasa V., Ayubov A., Ignatyev Y.
Mutual correlation and spectral analysis of excitations from reference tracks on different ruts
Podrubalov V., Podrubalov M.
Mathematical modeling of wheel tractor oscillations
Zolotarevskaya D.
Evaluation of the effect of fuel unevenness on diesel performance
Devyanina A.
Algorithm of optimal placement of skidding trails proceeding from the condition of ground damage minimization
Voronova A., Voronov R., Piskunov M., Schegoleva L.
Tractor units’ location determination by using of low-frequency alternating magnetic field
Kalyuzhny A.
Technology of turbocompressors repair
Senin P., Vlaskin V., Marushkin Y.
A method of investigating the destruction of connection between ear and grain
Gutrov M.
COMPARATIVE ANALYSIS OF THE ENERGY CAPACITY OF THE EXCITATION SYSTEM OF THE TRACTOR GENERATORS
CHERNOV A., AKIMO A.
Mathematical modeling of oscillations of a wheel tractor equipped with shock absorbers of front suspension
Zolotarevskaya D.
Plastic deformation during the recovery of sleeve bearings
Romanyuk N., Romanyuk S., Toygambayev S., Nukeshev S., Kushnir V.
1 - 39 的 39 信息

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##