Issue |
Title |
File |
Vol 7, No 3-2 (2013) |
Energy and resource efficiency in high temperature furnaces with false housing |
(Rus)
|
Bolshakova N.V.
|
Vol 7, No 3-2 (2013) |
Thermochemical conversion and composite sorbents for petroleum products based on blends of cellulose-containing and polymer waste of packaging |
(Rus)
|
Skopintsev I.V., Meleshkina A.M., Myasoyedova V.V.
|
Vol 7, No 3-2 (2013) |
Development of CALS-system for quality management of impregnating compositions for road pavements |
(Rus)
|
Glushko A.N., Bessarabov A.M.
|
Vol 7, No 3-2 (2013) |
Development of CALS-technology for tetrachloromethane of reagent qualification and high purity |
(Rus)
|
Bessarabov A.M., Stepanova T.I., Trokhin V.E., Vendilo A.G.
|
Vol 7, No 3-2 (2013) |
Study of hydrodynamic characteristics of regular packing of the nozzle-shaped elements |
(Rus)
|
Pushnov A.S., Baranova E.Y., Sokolov A.S.
|
Vol 7, No 3-2 (2013) |
Innovative waste processing technology |
(Rus)
|
Sister V.G., Zhivotov V.K., Korobtsev S.V., Ivannikova E.M., Yamchuk A.I.
|
Vol 7, No 3-2 (2013) |
Technology for biodiesel production |
(Rus)
|
Sister V.G., Ivannikova E.M., Yamchuk A.I.
|
Vol 7, No 3-2 (2013) |
Visualization of genetic networks in “Passportgen” program |
(Rus)
|
Safaryants D.S., Sofiev A.E.
|
Vol 7, No 3-2 (2013) |
Health status of workers in relation to the environment |
(Rus)
|
Kudrov A.N.
|
Vol 7, No 3-2 (2013) |
Semi-commercial testing of microbial fuel cells during concentrated industrial wastewater treatment with the subsequent generation of electric energy |
(Rus)
|
Kholodova E.M.
|
Vol 7, No 3-2 (2013) |
The objectives of the patent research at different stages of the life cycle of scientific and technological achievements |
(Rus)
|
Suslina I.V.
|
Vol 7, No 3-2 (2013) |
Study of multicyclone element gas treatment |
(Rus)
|
Nikolaykina N.E., Zavyalova M.S., Khutorov Y.F.
|
Vol 7, No 3-2 (2013) |
Asymptotics of solutions of differential equations with degeneration |
(Rus)
|
Kuznetsov V.V., Kuznetsova N.A.
|
Vol 7, No 3-2 (2013) |
Program-algorithmic complex for training to control the process of synthesis the fullerene soot |
(Rus)
|
Petrov D.N., Chistyakova T.B., Charykov N.A.
|
Vol 7, No 3-2 (2013) |
Reliability and risk management in the system of experts decision-making |
(Rus)
|
Bondar V.A.
|
Vol 7, No 3-2 (2013) |
The hydrophobization of photobioreactors intracavitary surfaces under the long-term cultivation of microalgae cell mass |
(Rus)
|
Biryukov V.V., Petrischeva O.A., Maltsevskaya N.V., Baranov E.R., Kovalenko N.V.
|
Vol 7, No 3-2 (2013) |
Investigation of the process of regeneration of silica gel by drying it in the super high-frequency electromagnetic field |
(Rus)
|
Shevchenko O.A., Suris A.L., Shatalov A.L.
|
Vol 7, No 3-2 (2013) |
Simulation of the process of cultivation of phototrophic microorganisms in a multisection’s photobioreactor |
(Rus)
|
Zubov D.V., Strokov S.S.
|
Vol 7, No 3-2 (2013) |
Minimization of energy consumption in the cooling systems of supercomputers |
(Rus)
|
Sukin I.A., Tsirlin A.M., Alimova N.A.
|
Vol 7, No 3-2 (2013) |
Parametric synthesis of the optimal regulator on the basis of the calculus of variations for General mathematical model of the object |
(Rus)
|
Polianskiy V.P.
|
Vol 7, No 3-2 (2013) |
Theoretical analysis of ultrasound exposure pollution on a reverse osmosis membrane |
(Rus)
|
Gonopolsky A.M., Stompel S.I., Ladigin K.V.
|
Vol 7, No 3-2 (2013) |
Recycling of organic waste on the basis of biogas production |
(Rus)
|
Shcherbakov V.I., Gogina E.S., Shchukin T.V., Kuznetsova N.V.
|
Vol 7, No 3-2 (2013) |
Reduced fuel in charge of iron ore agglomeration by supplying a sintered layer and the gas-water mixture |
(Rus)
|
Bogomolov V.M., Bogomolova N.P., Grechko E.G.
|
Vol 7, No 3-2 (2013) |
Methods and apparatus for determining the activity of cement |
(Rus)
|
Golovin V.V., Latyshenko K.P., Tsikunov V.S.
|
Vol 7, No 3-2 (2013) |
Reconstruction and upgrading of wastewater treatment facilities in the Moscow region |
(Rus)
|
Salomeev V.P.
|
Vol 7, No 3-2 (2013) |
Investigation of nitrogen oxides plasma-chemical processes in the recycling |
(Rus)
|
Suris A.L.
|
Vol 7, No 3-2 (2013) |
Automation installation for biological treatment of organic contaminants from water |
(Rus)
|
Strokov S.S., Maximov G.S.
|
Vol 7, No 3-2 (2013) |
Increasing the accuracy of the quantitative analysis biotechnological media for the content of labile components by using thin layer chromatography |
(Rus)
|
Zubov D.V., Soltanly N.M.
|
Vol 7, No 3-2 (2013) |
The detection of nutritional requirements of Fusarium sambucinum for the biosynthesis of protein in submerged culture |
(Rus)
|
Nemanova E.O., Rusinova T.V., Gorshina E.S., Biryukov V.V.
|
Vol 7, No 3-2 (2013) |
Reliability analysis equipment for recycling of production and consumption of composite laminated packaging materials |
(Rus)
|
Gonopolsky A.A.
|
Vol 7, No 2-2 (2013) |
Piston Rings |
(Rus)
|
Okolovich G.A., Okolovich A.G.
|
Vol 7, No 2-2 (2013) |
Research of the influence of the wall thickness variation of blanks punched by drawing with parts thinning on the uneven distribution of mechanical properties in the cross-sections |
(Rus)
|
Ageev N.P., Zateruha E.V.
|
Vol 7, No 2-2 (2013) |
Stamps for radial extrusion parts with the inner flange of the tubular blank |
(Rus)
|
Alieva L.I., Martynov S.V.
|
Vol 7, No 2-2 (2013) |
Resource-saving preparation of the structure and mechanical properties of steel 40X for cold die forging of hardware |
(Rus)
|
Pachurin G.V., Filippov A.A., Chinenkov S.V.
|
Vol 7, No 2-2 (2013) |
Development and research of technological possibilities of manufacturing two-layer spherical plugs of ball valves from billets by crimp method |
(Rus)
|
Ageev N.P., Malyh F.M., Dubickij K.O.
|
Vol 7, No 2-2 (2013) |
The technology of precision tubular products using compression on the profile mandrel rolling-drawing non-driven rollers |
(Rus)
|
Rozov J.G.
|
Vol 7, No 2-2 (2013) |
Cold extrusion with differentiated counter-pressure of die cavities |
(Rus)
|
Kaljuzhnyj V.L., Pimanov V.V.
|
Vol 7, No 2-2 (2013) |
Technology of upsetting process for parts with rectangular head and spherical radius |
(Rus)
|
Glazunov D.A., Kalpin J.G., Molodov A.V., Filippov J.K.
|
Vol 7, No 2-2 (2013) |
The process of obtaining a roll-formed sections with a predetermined longitudinal curvature through control the characteristics of plastic hinge in the deformation zone |
(Rus)
|
Markovcev V.A., Markovceva V.V.
|
Vol 7, No 2-2 (2013) |
Development of technological schemes of slip-rings made of beryllium bronze with methods of sheet stamping |
(Rus)
|
Sidel'nikov S.B., Ber V.I., Orelkina T.A., Vagner A.V., Korobkin A.N.
|
Vol 7, No 2-2 (2013) |
System management of the design process separating stamps for cold stamping |
(Rus)
|
Pochekuev E.N., Shenberger P.N.
|
Vol 7, No 2-2 (2013) |
The quality of products improving for flanging of circular holes in sheet metal blanks and profiles |
(Rus)
|
Kaljuzhnyj V.L.
|
Vol 7, No 2-2 (2013) |
Deformation determination of the layers in the axisymmetric forming a two-layer billet |
(Rus)
|
Tipalin S.A., Shpun'kin N.F., Kosachev N.V.
|
Vol 7, No 2-2 (2013) |
Remedy defects in the production of thin sheet profile at multi-roll forming bands |
(Rus)
|
Kolesov A.V., Kiselev D.O.
|
Vol 7, No 2-2 (2013) |
Selection of the method for samples preparation for determination of properties of bimetal layers |
(Rus)
|
Shumev A.V., Draganyuk V.D.
|
Vol 7, No 2-2 (2013) |
Visco-plastic forming of hemispherical shells by gas |
(Rus)
|
Sobolev J.A., Petuhov I.S.
|
Vol 7, No 2-2 (2013) |
The expansion of technological capabilities and advantages of convex inserts pre-forming in a hot die forging process of forged plates |
(Rus)
|
Kuhar' V.V., Nikolenko R.S., Suglobov R.V.
|
Vol 7, No 2-2 (2013) |
Design a tool for hot rolled workpiece |
(Rus)
|
Karpajtis E.P., Zolotuhin P.I., Volodin I.M.
|
Vol 7, No 2-2 (2013) |
Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping |
(Rus)
|
Malikov S.A., Volodin I.M.
|
Vol 7, No 2-2 (2013) |
Thermal barrier coatings for precision stamping heat-resistant steels |
(Rus)
|
Petrov A.N., Soljakov A.P.
|
Vol 7, No 2-2 (2013) |
Low - and non-waste technology of stamping ring forgings |
(Rus)
|
Shibakov R.V.
|
Vol 7, No 2-2 (2013) |
Theoretical and experimental research of forging operation in split dies |
(Rus)
|
Jakovlev S.S., Pasynkov A.A.
|
Vol 7, No 2-2 (2013) |
Advancing the short workpieces without the formation of a defect clip |
(Rus)
|
Aliev I.S., Kal'chenko P.P., Shvec A.A., Zhbankov J.G., Tagan L.V.
|
Vol 7, No 2-2 (2013) |
Effect of thermomechanical processing schedule on microstructure and mechanical properties of ultra high strength steel forgings |
(Rus)
|
Skubisz P., Sinczak J., Packo M., Mordalska K., Lisiecki L.
|
Vol 7, No 2-2 (2013) |
The relationship of elastic deformations of four-high system during formation of a profile and flatness of rolled strips |
(Rus)
|
Belsky M.M., Mukhin Y.A.
|
Vol 7, No 2-2 (2013) |
The mathematical model for calculating the thickness distribution of the metal in stamping in multisection dies with rotating discs |
(Rus)
|
Korobko T.B., Kozachishena E.S.
|
Vol 7, No 2-2 (2013) |
Analysis of stress and strain state in the elementary volume at the example of the upseting process |
(Rus)
|
Mamaev V.B.
|
Vol 7, No 2-2 (2013) |
Modeling the evolution of the deformation zone under various extrusion schemes |
(Rus)
|
Rjabicheva L.A., Usatjuk D.A.
|
Vol 7, No 2-2 (2013) |
Criterion of damage for the design of metal forming processes |
(Rus)
|
Trofimov V.N., Kuznecova T.V.
|
Vol 7, No 2-2 (2013) |
Determination of the stress-strain state of plastically deformed object with regard to the processes semi-hot die forging |
(Rus)
|
Pyzhov V.V.
|
Vol 7, No 2-2 (2013) |
Analysis of calculation methods of springback of sheet materials |
(Rus)
|
Saprykin B.J.
|
Vol 7, No 2-2 (2013) |
Theoretical and technological aspects of tube billets pinching |
(Rus)
|
Sosenushkin E.N., Janovskaja E.A., Hachatrjan D.V., Kinderov V.J.
|
Vol 7, No 2-2 (2013) |
Transverse stability of different-walled billets under pinching in stepped tapered dies |
(Rus)
|
Matafonov S.S.
|
Vol 7, No 2-2 (2013) |
Phenomenological approach to the determination of the stress state of the indicator chart for plasticity |
(Rus)
|
Grushko A.V.
|
Vol 7, No 2-2 (2013) |
Assessment of the accuracy results of the numerical simulation in problems of forming shells of sheet metal |
(Rus)
|
Mihajlova V.L., Petrov V.K., Suhomlinov L.G.
|
Vol 7, No 2-2 (2013) |
Ultimate capabilities of rotary drawing process of axially symmetric parts made from anisotropic materials |
(Rus)
|
Jakovlev S.S., Tregubov V.I., Osipova E.V.
|
Vol 7, No 2-2 (2013) |
Theoretical analysis of the combined radial-reverse extrusion parts with flange |
(Rus)
|
Alieva L.I., Grudkina N.S.
|
Vol 7, No 2-2 (2013) |
Theoretical research of upsetting process for parts with a rectangular head |
(Rus)
|
Kalpin J.G., Filippov J.K., Glazunov D.A.
|
Vol 7, No 2-2 (2013) |
Stress determination in sheet metal layers when editing pressure |
(Rus)
|
Rjabov V.A.
|
Vol 7, No 2-2 (2013) |
Simulation of mechanical tests aimed to investigate the flow stress during the abrupt change of the strain rate |
(Rus)
|
Potapenko K.E., Voronkov V.I., Petrov P.A.
|
Vol 7, No 2-2 (2013) |
Horizontal counterblow hammer with hydraulic mass connection |
(Rus)
|
Kobelev A.G., Chashkin D.S.
|
Vol 7, No 2-2 (2013) |
Research of the accumulation of damage in the parts of the press-forging equipment and tools by magnetic methods |
(Rus)
|
Kornilova A.V., Idarmachev I.M.
|
Vol 7, No 2-2 (2013) |
Experimental research of impact at upsetting on hammers in hot deformation |
(Rus)
|
Lavrinenko V.J., Semenov E.I., Feofanova A.E.
|
Vol 7, No 2-2 (2013) |
Designing of tools for finding the yield stress of materials by thermography method |
(Rus)
|
Kosachev N.V., Petrov P.A., Prokopov F.B., Voronkov V.I.
|
Vol 7, No 2-2 (2013) |
Springing of a multilayered material |
(Rus)
|
Tipalin S.A., Saprykin B.Y.
|
Vol 7, No 2-2 (2013) |
Effect of the number of tag billets on the final part temperature |
(Rus)
|
Hamidulina A.A.
|
Vol 7, No 2-2 (2013) |
Experimental research on the plastic upsetting between fixed walls of thin strips in the form of a rectangle and sector |
(Rus)
|
Kadymov V.A., Sosenushkin E.N., Belov N.A.
|
Vol 7, No 2-2 (2013) |
Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment |
(Rus)
|
Radkevich M.M., Fomin D.J.
|
Vol 7, No 2-2 (2013) |
Development of CAD subsystem manufacturing processes of jewelry |
(Rus)
|
Sidel'nikov S.B., Dovzhenko N.N., Gajlis J.D., Lebedeva O.S.
|
Vol 7, No 2-2 (2013) |
Analysis of technological process of forging broaches with the simulation in DEFORM-3D |
(Rus)
|
Taupek I.M., Alekseev P.L.
|
Vol 7, No 2-2 (2013) |
Modeling combined extrusion process to assess the limit of forming blanks from different materials |
(Rus)
|
Ogorodnikov V.A., Dereven'ko I.A.
|
Vol 7, No 2-2 (2013) |
Application of the RP-technology for manufacturing of compact mountings in a small-series casting production |
(Rus)
|
Leushin I.O., Reshetov V.A., Romanov A.D., Bol'shakov A.A.
|
Vol 7, No 2-2 (2013) |
Design of prototype devices for producing metal microspheres and shells |
(Rus)
|
Petrov M.A., Kosachev N.V., Petrov P.A., Shejpak A.A., Bast J.L.
|
Vol 7, No 2-2 (2013) |
Method of formation and selection of the optimal configuration of forming system for multi-coordinate processing |
(Rus)
|
Lukina S.V., Ivannikov S.N., Manaenkov I.V.
|
Vol 7, No 2-2 (2013) |
Strong interaction between the workpiece with abrasive wheels of double side grinding |
(Rus)
|
Balashov V.N., Judaev S.N., Gnevashev A.A.
|
Vol 7, No 2-2 (2013) |
The calculation of volumetric accuracy |
(Rus)
|
Maksimov J.V., Krylov O.V., Kuz'minskij D.L.
|
Vol 7, No 2-2 (2013) |
Modern technologies tendencies in development of flow-skiving |
(Rus)
|
Kalashnikov A.S., Morgunov J.A., Kalashnikov P.A.
|
Vol 7, No 2-2 (2013) |
Electrochemical finishing of airfoil blade wheels |
(Rus)
|
Loboda A.A., Mozgov S.A., Saushkin B.P.
|
Vol 7, No 2-2 (2013) |
Technology development of hardening of the surfaces of friction pairs of physical-chemical method |
(Rus)
|
Shandrov B.V., Filippov V.V., Homjakova N.V., Volkov S.M.
|
Vol 7, No 2-2 (2013) |
The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type |
(Rus)
|
Vetrova E.A., Lebedev P.A., Adeev A.S.
|
Vol 7, No 2-2 (2013) |
Obtaining of optimum parameters and modes for ultrasonic diamond milling of glass-ceramic |
(Rus)
|
Perepechkin A.A., Demidov D.V., Opal'nickij A.I., Petrov K.V.
|
Vol 7, No 2-2 (2013) |
Simulation of control systems by engineering manufacture |
(Rus)
|
Popov A.P.
|
Vol 7, No 2-2 (2013) |
Cutting quality and accuracy parameters of billet at the cutting process in the dies by rotary tool |
(Rus)
|
Kokorin V.N., Filimonov V.I., Zemskova A.N.
|
Vol 7, No 2-2 (2013) |
Development and application of high technologies in aircraft production |
(Rus)
|
Shandrov B.V., Morgunov J.A., Saushkin B.P.
|
Vol 7, No 2-2 (2013) |
Influence of processing factors on the structure and properties of carbon steel powder obtained by sintering and hardening of electropulse nanoparticles |
(Rus)
|
Panov V.S., Skorikov R.A., Eremeeva Z.V., Nitkin N.M., Sharipzjanova G.H., Zherdickaja N.N., Ivanov S.A.
|
Vol 7, No 2-2 (2013) |
Modernization of microinterferometer MII-4 |
(Rus)
|
Bavykin O.B., Vjacheslavova O.F.
|
Vol 7, No 2-2 (2013) |
Influence of phase composition on the electro-thermal-physical properties of powder tungsten alloys for high-load electric contacts |
(Rus)
|
Arzamasov V.B., Antipenko V.S., Stroev A.A., Galkin K.V.
|
Vol 7, No 2-2 (2013) |
The application of geometric programming for solving various technical and economic problems |
(Rus)
|
Birjukova E.A., Martishkin V.V., Fazlulin J.M., Knyazkov V.V.
|
Vol 7, No 2-2 (2013) |
The choice of a technique definition of platinoids at the disposal of automotive catalysts |
(Rus)
|
Bobovich B.B., Savko A.P.
|
Vol 7, No 2-2 (2013) |
The Hypothesis about the calculation of cutting forces accuracy. Cutting parameters. Designing of mathematical model |
(Rus)
|
Volkov A.V., Matveev S.V.
|
1301 - 1400 of 2404 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 > >>
|