检索

标题
作者
Improvement of agricultural machines reliability by means of controlled tightening
Astakhov M., Nikishkina A.
Analysis of market of row-crop cultivators
Fomenko D., Nesmiyan A.
Constructional and technological characteristic of a shutter air cleaner with curvilinear diversion canal
Saitov V., Farafonov V., Suvorov A.
Designing conception of innovative development and modernization of integrated mechanization of agro-industrial complex for the period up to 2025
Beylis V., Antyshev N.
Engineering of vibration protection system for transport unit of a motor cultivator
Podrubalov V., Podrubalov M., Skuratnik S.
High-pressure mixed-flow fan of tractor diesel cooling system
Andreyenkov A.
Dual-fuel system for tractor diesel with multi-stage heating
Ryzhov Y., Inshakov A., Kurochkin A.
Electronic on-board control system of operational and technological parameters of cotton harvesting units
Ulzhayev E., Ubaydullayev U., Ulzhayev Z.
Aerodynamic configurations, characteristics and application of transverse fans
Sychugov N.
Features of using diesel power stations and systems with energy storage and current limiters
Genin V., Popova M.
A system of capacity stabilization for the forage harvesters
Chepurnoy A., Pakhunova R., Pronin V.
Adaptive technical equipping of rural commodity producers
Lipkovich E.
Control of internal combustion engine regimes with the use of mathematical model
Makushin A., Zubkov E., Bakhvalova V., Ilyukhin A.
Tasks and problems of the revival of domestic agricultural engineering
Kolchin N., Zvolinsky V.
Comparative evaluation of the effectiveness of the vibration protection of the active suspension system with PID control
Kuz'min V., Godzhaev Z.
Analysis and development of the oil separator of the crank-case ventilation system of a highly-boosted diesel engine
Andriyanov S., Nikishin V., Kulikov A.
SIMULATION OF AUTOMATIC CONTROL SYSTEMS OF TILLAGE UNITS
PARKHOMENKO S., PARKHOMENKO G.
Determination of reactions of bearing surface on the wheels of tractor with frame stabilization
Mamiti G., L'yanov M., Pliev S., Zokoev A., Salbieva Z., Tedeev V.
Synthesis of control model of operating reliability of combine harvesters
Tsarev Y., Simon D.
Experimental assessment of wear and plastic deformations of the hydraulic cylinder elastomeric seals
Borisov V., Kuznetsov V., Vodyakov V., Kotin A.
Enhancement of efficiency and operation security of man-machine systems
Lipkovich I., Lopatin A.
Microprocessor control of fuel supply in diesel-generator
Ageyev V., Dushutin K., Vantyusov Y., Dudin A.
Estimation of fuel quality indices based on the investigation of its tribochemical processes and properties
Kerimov M., Safiullin R., Marusin A.
Mutual correlation and spectral analysis of excitations from reference tracks on different ruts
Podrubalov V., Podrubalov M.
Prospects of dynamic oscillations absorbers using in suspensions of tractor cabs
Pobedin A., Shekhovtsov V., Lyashenko M., Sokolov-Dobrev N., Shekhovtsov K., Godzhayev Z.
Reliability of tractor hydraulic systems in the context of purity of power fluid
Aliboyev B.
An integrated quality control system for the mechanized works in crop growing
Garanin G.
Systemic and analytical method for the formation of technological policy in the agro-industrial sector of Russian Federation
Zhalnin E.
Computer separator for the grain cleaning
Yampilov S., Tsybenov Z., Tsydypov T.
Ensuring the operability and fault tolerance of machinery by redundancy of replaceable elements
Eltoshkina E., Buraev M., Bodyakina T.
Programming the trajectories of machine-tractor units
Kalyuzhnyj A., Gus'kov Y., Dolgushin A.
Simulation modeling of the volumetric hydraulic drive
Popov A.
The characteristic of innovations of working bodies for sowing in technology of soil-free tillage and sowing
Bespamyatnova N., Bespamyatnov Y., Kolin'ko A.
A method for calculation of oil supply to the parts of units of agricultural machinery
Malomyzhev O., Fedotova N., Skutel'nik V.
Experimental research of electro-hydraulic proportional valve of mechatronic control system of automatic gearbox
Tarasik V., Savitskiy V.
Study of stationary regimes of drum grain dryer and opportunities to increase their intensity
Andrianov N., Mei S., Xue Y.
Stabilization of diesel fuel supply
Inshakov A., Kryuchkov S., Soloviov R.
Impact of the operational factors on lubrication conditions of crankshaft bearings of motor and tractor engines
Makushin A., Barylnikova Y.
Duplex electromechanical transmission with automatic control system
Dushutin K., Ageyev V., Vantyusov Y.
Theoretical investigations of wheeled tractor frame oscillations during the operation in tractive mode
Schetinin Y., Yesenovskiy-Lashkov M., Sergeyev A.
Effective indicators of 2Ч 10,5/12,0 diesel operating on ethanol and rape oil and using binary system of fuel supply
Likhanov V., Araslanov M., Kozlov A.
Efficiency improvement of automatic assembly in automotive and tractor engineering
Bukhteyeva I., Petukhov S.
Optimization of structure and operation modes of machine-tractor units
Kotsar Y., Pluzhnikov S., Golovaschenko G., Kumakov Y., Leonov S.
Agricultural engineering products quality certification maintenance based on the tractive and transport vehicles movement theory
Roslavtsev A., Sapozhnikov I.
A bulldozer hybrid power plant generator
Voronin S., Sogrin A., Shvalev Y., Kislitsin V.
One-channel stand for testing ТНВД (high-pressure fuel pump) of modern diesels
Gabitov I., Gabbasov A., Yagodin R.
Vibration protection of the hydraulic suspension system of mobile vehicles using active regulation by a neural network controller
Godzhaev Z., Sen'kevich S., Kuz'min V.
Design characteristics of an armored tractor for hot climate
Semenov A.
Modeling the movement control of a wheeled agricultural machine in real time
Nenajdenko A., Poddubnyj V., Valekzhanin A.
New opportunities to improve the fuel supply system with a battery fuel system
Dunin A., Golubkov L., Mal'chuk V., Dushkin P., Ivanov I.
VARIANTS OF TWO-COUPLE GEAR SHIFTING ORGANIZATION ON TRACTORS
Alendeev E., Kryuchkov V.
Technology of accelerated processing of rough plant raw material and waste
Reznik E., Kartashov S.
Principles for construction of mathematical model of a modern low-toxic diesel engine for transport and technological means and agricultural machines
Kamenev V., Scheglov P.
An automated system for the diagnostic of engine turbocharger systems of mobile power machines
Inshakov A., Kuvshinov A., Kurbakov I.
Mass optimization of mechanical tester of an automatic driver system of aggregates on narrow-profiled rest-balks
Buyashov V., Bukhovets A., Bychkovskiy V., Gorbachiov I.
Tractor diesel customization for mixed fuel burning
Ukhanov A., Ukhanov D., Khokhlova Y.
System of rear-view mirrors on a mobile vehicle intended for transmission of one whole image to a driver
Garanin G., Zotov I.
Anticorrosion properties of antifreeze of internal combustion engine cooling system
Khodyakov A., Bernatskiy V., Fedoseyenko Y.
Experimental investigation of gas diesel engine of К-700А tractor
Volodin V., Zagorodskikh B., Markov V., Furman V.
Innovative microwave installation SIGMA-1
Pakhomov A., Maksimenko V.
101 - 160 的 160 信息 << < 1 2 

检索提示:

  • 检索的名词区分大小写
  • 常用字词将被忽略
  • 默认情况下只有在查询结果满足所有检索词才返回(例如,隐含AND)
  • 使用OR结合多个检索词,便于查找含有这些检索词的文章,例如education OR research
  • 使用括号来创建更复杂的查询; 例如:archive ((journal OR conference) NOT theses)
  • 使用引号检索一个完整的词组; 例如: "open access publishing"
  • 使用-或者NOT排除一个检索词; 例如:online -politics or online NOT politics
  • 在检索词里使用 *作为通配符匹配任何字符序列; 例如., soci* morality 将符合含有 "sociological" or "societal"的词语

##common.cookie##