Search

Issue
Title
Authors
Legal state or change of priorities: analysis of messages of the President of the Russian Federation to the Federal Assembly
Marzak G.A.
Development of software and hardware interface for educational process in the complex study of programming languages at different levels
Kholodov G.M., Solopova O.I., Popovkin A.V.
Ways to reduce the cost of production of continuous basalt fiber
Sekerin V.D.
Investigation of the Kinematics of the Radial Extrusion Process with the Running Deformation Zone
Kalpin Y.G., Petrov P.A., Petrov M.A.
Multifunction voltage regulator for generator sets of a new generation
Chernov A.E., Akimov A.V., Krotov A.N.
Modernization and prospects of Russian higher education development
Sokurenko E.G., Kryuchkova E.A.
Awarding the Prize of the Government of the Russian Federation in Science and Technology for 2022
Editorial B.
Charitable activities in the villages of the Russian Federation as a competitive advantage of social entrepreneurship
Popova L.N., Shiriaeva S.V.
The cause of spontaneous fluctuations
Vyskrebtsov V.G.
The method of determining the efforts of the pre-tightening of bolts to a bearing of the crankshaft, automobile and tractor engines
Gots A.N.
Analysis of raw material dependence of the Russian economy and its impact on the competitiveness of the country
Shiriaev D.V., Vasilieva O.A.
Influence of Operation and Assembly Interaction of Pipe Valves on Their Quality Rating
Semenov A.N., Naumova S.A.
Phenomenological approach to the determination of the stress state of the indicator chart for plasticity
Grushko A.V.
Comparative evaluation of automobiles KAMAZ-4350, KAMAZ-43114 and Ural-4320-31 flotation on loose sand
Ostretsov A.V., Esakov A.E., Sharipov V.M.
The role of strategic analysis in the management of competitiveness
Aleksavina U.V.
Calculation-experimental determination of material functions of stainless steel 12Х18H10Т
Bondar V.S., Prolubnikova A.A., Abashev D.R.
Innovative Technologies in Educational Process for Preparation of Engineering Students
Zabenkina E.O., Artamonov I.V.
Demagnetizing channel factor and "bundle" of magnetization channels in granular medium
Sandulyak A.V., Sandulyak A.A., Ershov V.A.
Problems of the engineering industry in Russia in the conditions of economic instability
Loiko A.O., Ulyanova N.S.
Some measures to support the Russian Federation Industry
Leiba S.S., Gorohova A.E.
3D Model of Transfer of Pollutions from Motor Vehicles to the Air
Sukhinov A.I., Gadelshina B.K., Lyubomischenko D.S.
Decision support system for supplier selection in supply chain
Butusov O.B., Dubinin M.E.
Semiotics of comic in English-language fairy tale discourse
Plakhova O.A.
Steady viscous fluid flow at pipe entrance
Vyskrebtsov V.G.
Constitutional and legal regulation of use of languages in activities of government bodies and local authorities of the Russian Federation and Estonia
Machinskaya D.A.
Analysis of Mechanics of the Process of Cutting Hardened Material. Chip formation
Olenin L.D.
Statistics educational potential
Korgenevskaya E.I.
Use of Compleons for Environmentally Friendly Processes of Dissolution of Iron-Oxide Deposits
Artamonova I.V., Gorichev I.G., Zabenkina E.O., Lesnova L.A.
Influence of Alloying and Structural Condition of Thermionic Emission and Heat Resistance of Niobium
Arzamasov V.B., Smirnova E.E., Stroyev A.A., Polunov I.L.
Overview of the multi-layer sheet deformable materials for protection against noise
Tipalin ..S., Saprykin B.Y., Shpunkin N.F.
The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type
Vetrova E.A., Lebedev P.A., Adeev A.S.
Teaching of humane subjects based on the profile of a university
Kharlamova T.I.
Ways and means of overcoming social evil in Russian philosophy
Barkova I.N.
Effect of power racks in the inter-turbine nozzle of the two-shaft gas turbine engine to uneven flow at the entrance to the power-turbine
Kostyukov A.V., Plykin M.E.
Study of the Jacketing with Sheet Material Stretching
Shpunkin N.F., Tipalin S.A., Gladkov V.I., Nikitin M.Y.
Deformation of Parts in Manufacture
Zinchenko V.M., Gladkov V.I., Kruglov S.M.
The Mathematics Model of Mechanism Forming the Spot Face of Rolling Wheel
Sergeev A.I., Cherny I.V.
Development and research of technological possibilities of manufacturing two-layer spherical plugs of ball valves from billets by crimp method
Ageev N.P., Malyh F.M., Dubickij K.O.
Liberal reforms in Russia: historical and economic aspects
Filyakin Y.P.
Simulation of "body-suspension-wheel-soil" system using the finite element method
Kurdyuk V.A., Volskaya N.S., Rusanov O.A.
Improvement of four-wheel drive vehicle controllability with a connected front axle through the redistribution of torque
ZHilejkin M.M., EHranosyan A.V.
Theoretical and Applied Problems of Study of Psycho-pedagogical Support of Development of Gifted Students in Higher Technical School
Bargamyants M.L., Bargamyants N.L.
Highly effective layered tool materials with nano-dispersed multi-layered of wide range of applications
Maximov Y.V., Vereschaga A.S., Vereschaga A.A., Bublikov Y.I., Kryuchkov K.V., Kozlov A.A.
Using of historical material in study of Russian language in a technical university
Soluyanova E.G.
Features of study of philosophy and sociology by students of technical specialties
Khudoley S.S., Matisov S.K.
Legislative regulation of minority languages in the Russian Federation
Machinskaya D.A.
Gravitational analogue of the Earth and its shape
Rusanov P.G.
Usage of auxiliary models for the solution of problems of evaluation of innovative projects in the modern economy
Remizova A.A., Levitskaya A., Litvin I.U.
Mandates of Little Russian nobles for the Legislative Commission of Catherine the Great (1767-1768)
Frantsuzova O.A.
Problems in the implementation of the control system for vertical reactions of vehicle wheels
Ryazantsev V.I., Al'salamekh B., Levenkov Y.Y.
Agricultural tractors on Russian market (based on the International exhibition “Agrosalon 2018”)
Parfenov A.P.
Velocity Profile in Cell of Granulated Medium (Adapted Model of Stokes Flow around Ball)
Sandulyak A.V., Sandulyak A.A., Ershova V.A.
System of decision making support based on the fuzzy algorithm for selection of a supplier in the supply chain
Butusov O.B., Dubin M.E., Meshalkin V.P., Nikoforova O.P.
The necessity of modernization of the system of personnel management in Russian companies
Tayvo M.I., Latypov N.A.
Intellectual property as a factor of development of innovative economy of Russia
Ulyanova N.S., Ibroimov G.F.
Development trends in the development of quality management systems in education
Shamgunova A.D.
CONDITIONS NECESSARY FOR THE DEVELOPMENT OF SMALL INNOVATIVE BUSINESSES IN RUSSIA
Gribov V.D., Kamchatnikov G.V.
Sustainable Growth of Competitiveness as a Result of the Modernization of Russia on the Basis of Innovation
Kravtsova V.I., Alenina E.E., Trishkin A.G.
The mechanism for competitiveness assessment of the propulsion engineering production
Ionov V.I., Taiwo M.I.
Information Component of Competitiveness Recovery of Russian Small and Medium Enterprises
Rognova O.V., Igumnov V.M., Goncharova A.A.
Mechanical processing with activated air
Chekalova E.A., Chekalov P.D.
Analysis of enhancing the effectiveness of insurance companies at mergers and acquisitions
Loiko A.P.
Socially oriented market economy: past, present and future
Filyakhin Y.P.
The relationship of elastic deformations of four-high system during formation of a profile and flatness of rolled strips
Belsky M.M., Mukhin Y.A.
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type
Vetrova E.A., Lebedev P.A., Adeev A.S.
Conflicts and their impact on competitiveness and innovation development of organization
Bohanzeva I.A., Elizarova N.S.
Supervision of new phenomena in a flow-pattern of viscous liquid
Vyskrebtsov V.G.
Identification of a Vehicle Engine Operation for Use in a Mathematical Model of its Motion (by an example of DT466 engine)
Lepeshkin A.V., Kurmaev R.K., Katanaev N.K.
Health status of workers in relation to the environment
Kudrov A.N.
Interrelation of wear resistance with quality parameters of the surface layer of parts after machining
Sutyagin A.N.
Modernization and innovation of industrial production as factors, ensuring strategic stability and competitiveness of business organizations
Lyasnikov N.V., Dudin M.N., Muzaev S.K., Medyankova E.V.
Directions of development of innovative activity in industrial enterprises
Mochalkova K.M., Petergova A.V.
Validation of the mathematical model of the front drive axle suspension according to frequency response
Kulagin V.A., Rakhmatov R.I., Likeev A.P.
Optimization of Park Structure and Parameters of Assembly Equipment in Automotive Manufacture
Lamin I.I.
The turrets lathes with additional drive of rotation axial tools
Pini B.E., Maksimov Y.V., Lebedev P.A.
Cutting quality and accuracy parameters of billet at the cutting process in the dies by rotary tool
Kokorin V.N., Filimonov V.I., Zemskova A.N.
Business processes at the enterprises of automotive industry in Russia: evaluation of the effectiveness and governance issues
Alenina E.E., Paskhina A.V.
Analytical method of determining the extreme positions of special mechanisms using software systems
Ivanov V.A., Korenovskiy V.V., Mamaev A.N.
Comparison of the analytical solutionof efficieтcy regenerative rotating heatexchangethe device with resultsof numericalcalculations
Kalnitsky F.E., Kostyukov A.V.
The choice of design parameters of main and conrod bearings for passenger car engines
Zlenko M.A., Terenchenko A.S., Shibaev I.S.
Model stability control vehicle systems
Komarov V.V.
Modern trends in electric motor control
Zhmatov D.V., Gorkin V.P., Pakhomov E.E.
Reduced fuel in charge of iron ore agglomeration by supplying a sintered layer and the gas-water mixture
Bogomolov V.M., Bogomolova N.P., Grechko E.G.
Determination of the stress-strain state of plastically deformed object with regard to the processes semi-hot die forging
Pyzhov V.V.
Thermal effect at impact of a drop with a highly heated wall
Baranov D.A., Kazenin D.A., Skochilova Y.N., Trusov M.S.
Ensuring the quality of the surface layer and the reduction of process costs when machining R.N. Akinshin
Akinshin R.N.
Status and trends of venture business revitalization in Russia
Gribov V.D., Lubenets N.A.
Commodity market of Russia: the quality, competitiveness and management
Alenina E.Е., Iliin A.S., Ziulina V.V.
Searching stochastic method of the submersible electric pump flow part optimal shape
Gorbatov D.A., Zharkovskii A.A., Adrianov A.V.
The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines
Shabanov A.V., Kondratiev D.V., Vanin V.K., Dunin A.Y.
THE ROLE OF INDUSTRIAL CORPORATIONS IN THE INNOVATION BUSINESS
Gribanich V.M.
Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge
Olenin L.D.
Method of improving the performance of gasoline engine work with internal mixing
Fomin V.M., Platunov А.S.
Use of Modern Information and Communication Technologies in the Practice of Teaching the Russian language and culture of speech Subject
Kochanova E.N.
On the issue of possibilities of educational process at the solution of applied problems
Martishkin V.V., Prilepina N.N.
The Issues of Industrial Cycles Modeling in the National Economy
Katanaev N.T., Arkatova N.A., Larina E.V.
The Influence of Interaxial Deviation in the Control System of Continuously Variable Transmission of AWD Six-Wheeler on the Operating Efficiency
Lepeshkin A.V., Kurmaev R.K.
Risk and Reliability Management for Motor Transport on the Basis of Monitoring of Features of Operating Vehicles
Komarov V.V.
Analysis of constructions providing the maximum thermodynamic effectiveness of reciprocating engines
Khripach N.A., Lezhnev L.U., Papkin B.A., Shustrov F.A., Tatarnikov A.P., Tingaev N.V.
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle
Kamennyy A.V., Kostyukov A.V., Makarov A.R., Pustyntsev M.E.
1 - 100 of 320 Items 1 2 3 4 > >> 

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"