Search

Issue
Title
Authors
Investigation of cavitation properties of a mobile pumping unit
Konshin D.S., Konkeyev E.M., Protopopov A.A., Petrov A.I.
An energy efficiency analysis of the electrodynamic antispin regulation of the city electrobus
Zhileykin M.M., Klimov A.V., Maslennikov I.K.
Development of a complex of mathematical models of a vehicle suspension for fatigue life analysis
Kulagin V.A.
Validation of the CAE model set for a passenger car suspension according to loading criteria
Kulagin V.A.
Development and research of the model of a wheel-legged robot
Dyakov A.S., Evseev K.B., Fedorov D.S.
Computer modeling of knowledge in artificial intelligence
Inozemtsev V.A.
Algorithm for determination of illumination intensity of solar panels of the Russian segment of the International Space Station
Sazonov V.V.
NUMERICAL STUDY OF FRICTION AT UPSET FORGING WITH RADIAL EXTRUSION OF PARTS OF ROD WITH A THICKENING-TYPE OF ALUMINUM ALLOY AD1
Petrov M.A., Petrov P.A., Kalpin Y.G.
Development of Software for Calculation of a Spatial Dimension Chain
Ankin A.V., Kuzminsky D.L.
Analysis of the characteristics of external combustion heat engine by computer simulation
Potapov S.I., Nikishkin S.I., Piskarev M.Y.
Evaluation of the conditions of oil seepage into the ground after corrosion damage of a tank covering
Kuts Y.N., Korolchenko I.A., Veksler G.B.
Mathematical model of operation of an active two-axle four-wheel carriage with equalizing beam suspension in steady rectilinear motion on deformable bearing surface
Lepeshkin A.V.
Analysis of the results of mathematical modeling of curvilinear motion of three-axle all-wheel drive vehicle with locked interaxle drive
Lepeshkin A.V., Katanaev N.T., Medvedev A.S., Simochkin A.V.
Trigonometric probability distribution
Ivashnev L.I.
Development of a souvenir bell with use of modeling
Filippov Y.K., Krutina E.V., Filippov K.Y.
Optimization of the working cycle of a transport diesel engine by simulating the combustion process with a double Wiebe function
Kamaltdinov V.G., Markov V.A., Lysov I.O., Popov A.E., Smolij A.E.
Innovative research and development based on of 3D parametric modeling technology
Shpun'kin N.F., Petrov P.A., Strokov P.I., Gnevashev D.A., Nikitin M.Y.
INCREASE OF EFFECTIVENESS OF A ROTARY HEAT EXCHANGER OF A SMALL-SIZE GAS TURBINE ENGINE
Kostyukov A.V., Alekseev R.A.
Optimal control theory solutions for investigation of a hybrid electric vehicle’s powertrain
Kulikov I.A.
Identification of parameters of the resistance movement of wheeled vehicles during operation
Shadrin S.S.
Results of the study of the mathematical model of interaction of an elastic wheel with a deformable bearing surface under steady rectilinear rolling
Lepeshkin A.V., Kruglov S.M., Petrov S.E., Pkhakadze S.D.
Development of supercharging systems for internal combustion engines for variuos purposes
Kaminskiy R.V.
Methods for identification and optimization in intelligent systems
Kryzhanovskaya T.G., Pupkov K.A.
Mathematical methods for the analysis of migration processes on the basis of demographic data
Butusov O.B., Nikiforova O.P., Redikultseva N.I.
The choice of the rational design of the mobile robot mover for urban environment
Tsipilev A.A., Smirnov I.A.
CREATING A PROMISING TOOL FOR THE PLANETARY SHAPING OF INTERNAL THREADS ON THE BASIS OF VISUALIZATION OF 3D-MODELING
Kosarev V.A., Ivanov V.F.
Simulation Point-drop Processes with Assembly Error of Thermal Heater Connection
Tolokonnikov S.V.
The dependence of the demographic situation of migration flow showed by the example of the three simulated countries with different social and economic indicators
Pyrov P.V., Butusov O.B., Nikoforova O.P.
Surface modeling of an automobile body in SolidWorks using technical drawing
Knyazkov V.V., Kolchin P.V., Fazlulin E.M.
Simulation of the process of cultivation of phototrophic microorganisms in a multisection’s photobioreactor
Zubov D.V., Strokov S.S.
Determination of values of the solution flow rate and temperature in carbon dioxide absorption process
Gureev A.O., Pikulin Y.G.
Identification of the longitudinal movement of the vehicle in free-wheel mode
Katanaev N.T., Lepeshkin A.V., Kolbasov A.F.
Development and testing of a mathematical model of the engine pre-start operation at low ambient temperatures
Yelagin M.Y., Pavlov D.V., Khmelev R.N.
Structural modeling and classification of methods of electrochemical machining
Saushkin S.B., Morgunov Y.A.
Modeling of Dynamics of Vehicles Manual Transmissions System with Frictional Clutch
Selifonov V.V., Nguyen Khac T.
Investigation of the heat transfer process in a mesh matrix of a rotary heat exchanger
Alexeev R.A., Kostyukov A.V.
Modeling of electromagnetic field in the resonator with regard to the measurement of the fuels water cut
Kardyshev G.A., Shatalov A.L., Suslin M.A.
Development of technology for the manufacture of forgings with spikes on the basis of piecemeal stamping
Malikov S.A., Volodin I.M.
The study of KAMAZ-4308 acceleration with single-threaded and dual-threaded clutch in transmission
Gorbatovskiy A.V., Kotiyev G.O., Chulyukin A.O.
Use of extrapolation in forecasting living standards of Russian population
Yurkova E.A.
Investigation of the relationship between theoretical and actual turning radii of a tracked vehicle using mathematical modeling
Stadukhin A.A.
Simulation of Tool Contact with a Workpiece When Processing by Smoothing in the Kompas 3D Software
Kuznetsov V.A., Sazonov D.A., Smirnov A.V.
Computational modeling of relaxation self-excited oscillations in the double-mass system with friction under alternating loading
Mikhailova V.L.
Precision of machining on CNC machines
Maksimov Y.V., Bekayev A.A., Nadolskiy M.A., Prokhorov A.V.
Methods of diagnostics of sensors of automotive electronic control systems with hybrid transmission
Nabokikh V.A., Safronov A.V.
The expansion of technological capabilities and advantages of convex inserts pre-forming in a hot die forging process of forged plates
Kuhar' V.V., Nikolenko R.S., Suglobov R.V.
Geometrical modeling in SolidWorks
Knyazkov V.V., Fazlulin E.M.
Rayleigh-Taylor instability in the high-speed collision of metal plates
Fortova S.V., Son E.E., Doludenko A.N.
Mathematical modeling of motion of lorry convoy on the deformable support surface in view of emerging dynamic processes
Selyuk D.V., Karpukhin S.A.
Mathematical modeling of the functioning process of a single-cylinder air-cooled diesel engine taking into account the consumption of crankcase gases
Pavlov D.V., Platonov K.Y., Khmelev R.N.
Numerical study of the effect of droplet coagulation intensity on polydisperse aerosol fraction distribution
Tukmakov D.A.
MATHEMATICAL MODELING OF HYDRAULIC DRIVE OF A FAN FOR AUTOMOTIVE ENGINE COOLING SYSTEM
Trukhanov K.A.
Effective designing of means of technological equipment by the automated preparation of machine-building manufacture
Spirin D.V., Arkatova N.A.
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle
Kamennyy A.V., Kostyukov A.V., Makarov A.R., Pustyntsev M.E.
Modeling combined extrusion process to assess the limit of forming blanks from different materials
Ogorodnikov V.A., Dereven'ko I.A.
Automated process control system for the biosynthesis of enzymes
Zubov D.V., Tolchenov A.A.
Mathematical modeling of measuring transducers
Golovin V.V., Latyshenko K.P.
Modeling of uneven flanging process
Tipalina A.V., Filippov Y.K., Panfyorov V.V., Kuchkovsky Y.P., Boronnikov D.A.
Simulation of engine speed performance characteristics
Katanaev N.T., Lepeshkin A.V., Kolbasov A.F.
Model of the dynamics of a wheeled vehicle for a complex of full-scale-mathematical modeling
Kositsyn B.B.
Vibration levels on operator’s workplace and vibration protection characteristics of seat suspensions
Godzhayev Z.A., Lyashenko M.V., Shekhovtsov V.V., Potapov P.V., Iskaliyev A.I.
Hybrid electric vehicle development with mathematical simulation software application
Cheranev S.V.
Simulation of Tooling System Rigidity for Estimation Their Influence on Working Accuracy
Pini B.E., Zinovyev D.A.
Theoretical studies of dependence of geometric parameters of a contact between a tool and a workpiece on installation of a tool in the process of burnishing
Kuznetsov A.V., Vasiliev V.A., Bezhenar E.N., Zabolotnaya I.V., Sazonov D.A., Smirnov A.V.
Calculation based on capacity of the crank hot-stamping presses for technological processes of thermomechanical treatment
Radkevich M.M., Fomin D.J.
Archiving module for data backup and storage
Eliseeva O.A., Pyankov I.B., Reshetina N.V.
Training of skilled fighters in a technical university
Kazilov M.M., Frolov V.G., Podlivaev B.A.
Electromechanical system for providing continuity summing power to the driving machine when shifting gears in transmission of a vehicle
Gorbatovskiy A.V., Kotiev G.O., Chulyukin A.O.
Mathematical modeling of cargo oscillations on the mobile machine manipulator load lifting body
Kovalskiy V.F., Lagerev I.A.
The principles of rating development for innovative enterprise business partners reliability
Smetanov A.Y.
SIMULATION MODELING OF ABS OPERATION BASED ON THE QUASI-SPATIAL DYNAMIC MODEL OF A VEHICLE
Lata V.N., Solomatin N.S., Okunev A.P., Eremina I.V., Ermolin A.V.
Modeling of engine starting process with a starter supplied from a capacitive energy storage
Garmash Y.V.
Numerical and experimental investigation of braking performance of a bus
Groshev A.M., Konikova G.A., Kostin S.Y., Trusov Y.P., Tumasov A.V.
Analysis of the methods of calculation and simulation of DC motors with permanent magnet excitation
Rozin P.A., Akimov A.V., Kudinova L.A.
Improving the efficiency of assembly processes of gas turbine engines rotors, based on simulation technologies
Timofeev М.В., Timofeeva Е.В.
Scaling parameters and modeling flutter of a cylindrical shell
Kiyko I.A., Pokazeev V.V.
Research of extrusion process for piston-type hollow parts of car brake system cylinder by cold forging
Filippov Y.K., Tipalin S.A., Petrov M.A., Anfimov Y.N., Filippov K.Y.
Mathematical modeling of the dynamics of manipulation system for mobile transport and technological machine with reference to the elasticity of elements
Kovalskiy V.F., Lagerev I.A.
1 - 78 of 78 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies