Issue |
Title |
File |
Vol 85, No 2 (2018) |
Automatic control of the movement of the caterpillar vehicle with intelligent hydrostatic transmission for target designation in GPS coordinates |
 (Rus)
|
Kondakov S.V., Dubrovskiy N.V.
|
Vol 76, No 1 (2009) |
Automatic ecological-andanalytical monitoring of working area by testing ДВС (internal combustion engine) |
|
Dobrolyubov I.P., Dmitriyev V.V.
|
Vol 77, No 5 (2010) |
Automation and information support conference |
|
- -.
|
Vol 77, No 4 (2010) |
Automation and information support of production processes in agriculture |
|
- -.
|
Vol 76, No 9 (2009) |
Automation of control of removing oils from three-product hydraulic cyclone |
|
Mazhugin Y.I., Pashkevich A.V.
|
Vol 81, No 4 (2014) |
Automation of performance calculation of horizontal load stabilizers for machine and tractor units |
|
Kuznetsov N.G., Gapich D.S.
|
Vol 84, No 6 (2017) |
Automation of the test bench for experimental research of the local air cooler of the vehicle driver |
 (Rus)
|
Mikhaylov V.A., Klimova E.V.
|
Vol 76, No 12 (2009) |
Automation of tuning system of technological process for a grain combine harvester |
|
Tsarev Y.A., Dzhigarkhanov D.G.
|
Vol 80, No 9 (2013) |
Autonomous power-supply source on diesel-generator base |
|
Levtsev A.P., Yenivatov A.V.
|
Vol 76, No 3 (2009) |
Avdeev Arkadyi Viktorovitsh |
|
- -.
|
Vol 76, No 6 (2009) |
Avtomatizirovannaya sistema upravleniya mekhanizmom povorota gusenichnykh mashin «bortovoy friktsion» |
|
Kotiev G.O., Adamchuk A.I., Gorelov V.A.
|
Vol 89, No 6 (2022) |
Awarding the Prize of the Government of the Russian Federation in Science and Technology for 2022 |
|
Editorial B.
|
Vol 81, No 1 (2014) |
Backward-and-forward extrusion application for the improvement of cold forging of tractor planetary gear transmission shaft |
|
Ignatenko V.N., Filippov Y.K., Ragulin A.V., Yevsikov R.A.
|
Vol 82, No 10 (2015) |
Balancing of swash plate mechanism for cutterbar drive of grass cutting header |
|
Kotov A.V., Chuprynin Y.V.
|
Vol 84, No 9 (2017) |
Ballasting of tractors |
 (Rus)
|
Kut'kov G.M., Gribov I.V., Perevozchikova N.V.
|
Vol 82, No 7 (2015) |
Bases of active noise control |
|
Polivayev O.I., Kuznetsov A.N.
|
Vol 80, No 9 (2013) |
Bases of identification and modeling of artificial pollutions of operating fluids and oils |
|
Baryshev V.I., Maksakova I.V., Ibragimova K.Z., Kovaliov I.N.
|
Vol 80, No 8 (2013) |
Bases of the theory of mechanical energy functioning in technological machines |
|
Korshun V.N.
|
Vol 87, No 2 (2020) |
Basic characteristic of fuel control of a tractor diesel engine equipped with a fuel skipping system |
 (Rus)
|
Gajsin E.M.
|
Vol 80, No 2 (2013) |
Basic constructional and operating characteristics of a flotation plant |
|
Mukhin V.A., Kirov Y.A.
|
Vol 81, No 6 (2014) |
Basic measures allowing to increase the energy efficiency of electric equipment in agroindustrial complex |
|
Safonov A.S.
|
Vol 79, No 12 (2012) |
Basic provisions of the «Machines passability» monograph |
|
Ponomariov A.V.
|
Vol 80, No 7 (2013) |
Basics of quality management of research and development of piston internal-combustion engine for tractive vehicles |
|
Didmanidze O.N., Legeza G.V., Sapozhnikov I.I.
|
Vol 83, No 8 (2016) |
Basics of safe drying of seeds |
 (Rus)
|
Golubkovich A.V.
|
Vol 86, No 5 (2019) |
Batch corn thresher |
 (Rus)
|
Pogosyan V.M.
|
Vol 84, No 5 (2017) |
Bearing and technological systems for building agricultural aggregates |
 (Rus)
|
Dmitrenko A.I., Bur'yanov A.I., Goryachev Y.O.
|
Vol 81, No 7 (2014) |
Belarus-921 horticultural tractor |
|
Zezetko N.I.
|
Vol 80, No 10 (2013) |
Bench tests of a diesel completed with fuel energy-saturating device |
|
Simdyankin A.A., Kaykatsishvili G.Z.
|
Vol 80, No 3 (2013) |
Benches for laboratory testings of cabbage harvesters |
|
Toncheva N.N., Tabakova Y.A., Alatyrev S.S.
|
Vol 80, No 10 (2013) |
Bestseller among the Challenger tractors in the Russian market |
|
- -.
|
Vol 80, No 8 (2013) |
Bibliometric analysis of domestic agri-engineering journals |
|
Demidov D.D.
|
Vol 77, No 11 (2010) |
Bimetallic aluminium-iron castings based on the combined technology of metallothermy and self-propagating high-temperature synthesis |
|
Alov V.A., Sotskaya I.M., Larionova Y.S., Kupriyanov I.N.
|
Vol 82, No 10 (2015) |
Biodiesel fuel production from microalgae |
|
Nagornov S.A., Mescheryakova Y.V.
|
Vol 78, No 2 (2011) |
Biofuel made of Camelina sativa |
|
Ukhanov A.P., Ukhanov D.A., Rachkin V.A., Chugunov V.A., Demidov Y.V., Shemenev D.S.
|
Vol 77, No 9 (2010) |
Biogas as an alternative fuel |
|
Zakharchenko A.N., Gadzhiyev P.I., Satyanov S.V., Zakharchenko A.A.
|
Vol 80, No 2 (2013) |
Bobruisk plant of tractor parts and units is awarded with commemorative decoration of Lombardini company |
|
- -.
|
Vol 78, No 12 (2011) |
Bobruisk tractors at the Hannover exhibition |
|
- -.
|
Vol 78, No 1 (2011) |
Boost pressure control by tractor diesels' turbo-superchargers diagnosis |
|
Inshakov A.P., Kuvshinov A.N.
|
Vol 86, No 2 (2019) |
Brake force of tracked vehicles |
 (Rus)
|
Kopotilov V.I.
|
Vol 84, No 3 (2017) |
BRAKE OF THE FRONT DRIVE WHEELS OF THE TRACTOR "BELARUS" |
 (Rus)
|
Mel'nikov A.S., Bilyk O.V., Choy K., Mel'nikov A.A.
|
Vol 76, No 1 (2009) |
Branch regulation ofcreation, production and use of agricultural machinery |
|
Krasnoschekov N.V., Lipkovich E.I.
|
Vol 78, No 3 (2011) |
Breaking grain by percussion cleavage |
|
Solntsev R.V.
|
Vol 77, No 9 (2010) |
Built-in electromechanical systems of direct electric drive |
|
Mamedov F.A., Litvin V.I., Safonov A.S.
|
Vol 77, No 6 (2010) |
Bulb onion digger design and operating parameters |
|
Laryushin N.P., Laryushin A.M., Kuvaytsev V.N.
|
Vol 76, No 2 (2009) |
Business-possibilities of Expocentre central exhibition complex |
|
- -.
|
Vol 79, No 9 (2012) |
Buzenkov Gavriil Mikhaylovich |
|
- -.
|
Vol 80, No 5 (2013) |
Calculated diagram of timber overloader |
|
Poletaykin V.F., Plesovskikh G.N.
|
Vol 77, No 2 (2010) |
Calculating indices of work cycle of engine with the spark ignition and different feed systems |
|
Bazarov B.I., Kalauov S.A.
|
Vol 81, No 11 (2014) |
Calculation algorithm of piston engine indices at the design stage |
|
Gavrilov A.A., Gots A.N.
|
Vol 87, No 5 (2020) |
Calculation and identification of the coordinate of oil jet ejection from the gap of a rotating connecting rod bearing |
 (Rus)
|
Putintsev S.V., Strelnikova S.S., Anikin S.A.
|
Vol 82, No 12 (2015) |
Calculation features of cycle of reciprocating internal combustion engine operating on gaseous fuel |
|
Gavrilov A.A., Gots A.N.
|
Vol 82, No 2 (2015) |
Calculation method of modeling of deformation properties of soils in the forecasting problems of interaction of wheeled mover with the bearing surface |
|
Kurdyuk V.A., Volskaya N.S., Rusanov O.A.
|
Vol 80, No 3 (2013) |
Calculation method of resistance and moment of resistance to soil cutting |
|
Akimov A.P., Konstantinov Y.V., Fedorov D.I.
|
Vol 83, No 3 (2016) |
Calculation model of technological process of soil crumbling by means of tillage working organs |
 (Rus)
|
Blednykh V.V., Svechnikov P.G., Troyanovskaya I.P.
|
Vol 80, No 5 (2013) |
Calculation of bearing capacity of shafts and their joints under comparative corrosive tests |
|
Chibukhchyan S.S., Stakyan M.G.
|
Vol 80, No 5 (2013) |
Calculation of characteristics of grain oscillating drying in a mobile grain dryer |
|
Golubkovich A.V., Pavlov S.A., Lukin I.D., Mashkovtsov M.F.
|
Vol 79, No 5 (2012) |
Calculation of driving power of rotary blade tool of a tiller |
|
Akimov A.P., Konstantinov Y.V., Fiodorov D.I.
|
Vol 80, No 3 (2013) |
Calculation of grain mill characteristics for mobile compound feeds aggregates |
|
Klychev Y.M., Reznik Y.I., Bestayev L.Z.
|
Vol 79, No 7 (2012) |
Calculation of laws of motion for the valves (tappets) of motor and tractor engines |
|
Makushin A.A.
|
Vol 83, No 10 (2016) |
Calculation of nominal values of the main indicators of agricultural tractor |
 (Rus)
|
Samsonov V.A.
|
Vol 90, No 1 (2023) |
Calculation of normal stiffness and contact patch of ultra-low pressure tires for agricultural machinery |
|
Balakina E.V., Godzhaev Z.A., Konshin A.A., Kochetov M.S.
|
Vol 84, No 7 (2017) |
Calculation of optimal power and energy saturation of an agricultural tractor |
 (Rus)
|
Samsonov V.A., Lachuga Y.F.
|
Vol 78, No 1 (2011) |
Calculation of radiation protection of the wheeled and caterpillar machines' operator |
|
Gusev S.A.
|
Vol 91, No 4 (2024) |
Calculation of resistance force at firm clay digging with a cylindrical bucket |
|
Buryi G.G.
|
Vol 76, No 2 (2009) |
Calculation of speed of liquid flow in the interbladechannels of hydraulic coupling |
|
Zakomoldin I.I., Sidorov G.F., Zakomoldin D.I.
|
Vol 78, No 6 (2011) |
Calculation of strength and rigidity of cereal crops' culms |
|
Zhilkin V.A.
|
Vol 76, No 9 (2009) |
Calculation of the average total operating time for the group of technical equipment with spare components |
|
Korolkova L.I., Ignatyev G.S.
|
Vol 84, No 10 (2017) |
Calculation of the maximum energy saturation of an agri-cultural tractor |
 (Rus)
|
Samsonov V.A., Lachuga Y.F.
|
Vol 85, No 5 (2018) |
Calculation of the parameters of the corrector section of the speed characteristics tractor engine |
 (Rus)
|
Samsonov V.A., Lachuga Y.F.
|
Vol 89, No 1 (2022) |
Calculation of the required minimum of a motor oil level on cylinder-piston group moving surfaces of the automotive diesel |
 (Rus)
|
Putintsev S.V., Anikin S.A., Demenkova S.P., Strelnikova S.S.
|
Vol 81, No 9 (2014) |
Calculation of V-belt transmissions for agricultural machinery with automatic adjustment of belt tension |
|
Balovnev N.P., Dmitriyeva L.A.
|
Vol 79, No 4 (2012) |
Calibration of fatigue sensors under asymmetric stress cycles during the operation of agricultural machine's parts |
|
Tyutrin S.G.
|
Vol 79, No 5 (2012) |
Calibration of field sprayers and modern devices for its realization |
|
Drincha V.M., Sergeyev Y.A., Sharibura A.O.
|
Vol 90, No 4 (2023) |
Capabilities for increasing the technological level of high-power wheeled tractors |
|
Selivanov N.I., Kuznetsov A.V., Kuzmin n.V., Shram V.G., Kaiser Y.F.
|
Vol 78, No 7 (2011) |
Capacity and parameters of air duct of pneumatic-mechanical pickup loader for loose hay |
|
Astafyev V.L., Bobkov S.I.
|
Vol 81, No 1 (2014) |
Change in strategic group membership of global agricultural engineering industry and in branch positions of its members |
|
Fayzrakhmanov F.M.
|
Vol 77, No 4 (2010) |
Change of diesel toxicity indices by work on the methanol fuel emulsion |
|
Likhanov V.A., Toropov A.Y., Romanov S.A.
|
Vol 83, No 12 (2016) |
Changes in the standard of unified system of tolerances and fits |
 (Rus)
|
Bondareva G.I., Leonov O.A., Shkaruba N.Z., Vergazova Y.G.
|
Vol 77, No 1 (2010) |
Changing form of piston rings in response to engine temperature |
|
Ivashentsev G.A., Khokhlov A.V.
|
Vol 82, No 4 (2015) |
Changing of nitrogen oxides formation in the cylinder of diesel engine operating on methanol |
|
Likhanov V.A., Anfilatov A.A.
|
Vol 80, No 8 (2013) |
Characteristics and operational modes of a drum potato sorter |
|
Tyutin I.E., Ivanov A.G.
|
Vol 80, No 1 (2013) |
Characteristics of a linear electric drive on the base of asynchronous motor with various frequency winding power supply |
|
Litvin V.I., Khromov Y.V.
|
Vol 79, No 11 (2012) |
Characteristics of compensatory capacity of loader and the transport support of sowing complexes |
|
Astafyev V.L., Muslimov N.M., Ivanchenko P.G., Malygin S.L.
|
Vol 84, No 9 (2017) |
Characteristics of external influences on the operation of machine-tractor units |
 (Rus)
|
Kambulov S.I., Rykov V.B., Bozhko I.V., Kolesnik V.V.
|
Vol 76, No 2 (2009) |
Characteristics of mixing loose materials bygrinding |
|
Baranov N.F., Fufachev V.S., Sergeev A.G.
|
Vol 77, No 7 (2010) |
Chelyabinsk tractor plant on the International exhibition «Building Machinery and technologies 2010» |
|
- -.
|
Vol 76, No 11 (2009) |
CHEMISTRY-2009 in the Expocentre central exhibition complex |
|
- -.
|
Vol 78, No 2 (2011) |
Choosing a kinematic diagram for the tractor gear box with preselected powershift |
|
Lysov A.M.
|
Vol 78, No 7 (2011) |
Choosing a set of indirect diagnostic parameters for the measuring expert system of internal combustion engine |
|
Dobrolyubov I.P.
|
Vol 79, No 2 (2012) |
Choosing abrasive materials for the grinding of iron-based plasma coatings |
|
Alekseyev N.S., Ivanov S.V., Boyko Y.A., Kaporin V.A.
|
Vol 80, No 8 (2013) |
Choosing of class and characteristics of a modern tractor transmission |
|
Amelchenko P.A., Dubovik D.A., Zhukovskiy I.N., Klyuchnikov A.V., Zhukovskiy A.I.
|
Vol 78, No 3 (2011) |
Choosing suspension for the class 6 caterpillar farm tractor with triangular layout diagram |
|
Lysov A.M.
|
Vol 79, No 10 (2012) |
Choosing the kinematic characteristics of a test bench for rotary cultivators tests |
|
Kupryashkin V.F., Chatkin M.N., Naumkin N.I., Avdeyev V.N., Kapustin A.G., Kupryashkin M.A.
|
Vol 80, No 2 (2013) |
Choosing the placement location for friction clutches and synchronizers in a gearbox |
|
Scheltsyn N.A., Kryuchkov V.A., Sharipov V.M., Ivanov I.V., Yevtushik O.V.
|
Vol 79, No 8 (2012) |
Choosing the suspension for agricultural category 5(6) tractor with triangular tracked bypass |
|
Kosenko V.V.
|
Vol 80, No 10 (2013) |
Circuit of obligatory trigger-action audio alarm before electric drives switching on |
|
Mazukha A.P., Mazukha N.A.
|
Vol 85, No 1 (2018) |
Classification and synthesis of three-loop planetary gearboxes |
 (Rus)
|
Salamandra K.B.
|
Vol 76, No 11 (2009) |
Classification of farm tractors by the engine power |
|
Lysov A.M.
|
Vol 79, No 11 (2012) |
Classification of mechanization means of tools for seeds plowing down |
|
Yemelyanov P.A., Aksionov A.G., Sibiriov A.V.
|
Vol 76, No 2 (2009) |
Classification of mechanizationmeans for sowing seeding-onion |
|
Yemelyanov P.A., Aksenov A.G.
|
301 - 400 of 2384 Items |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 > >> |